[1]
|
J. Iwaszko, “Surface Remelting Treatment of Plasma- Sprayed Al2O3 + 13 wt% TiO2 Coatings,” Surface and Coatings Technology, Vol. 201, No. 6, 2006, pp. 3443- 3451. doi:10.1016/j.surfcoat.2006.07.234
|
[2]
|
E. H. Jordan, M. Gell and Y. H. Sohn, et al., “Fabrication and Evaluation of Plasma Sprayed Nanostructured Alu- mina-Titania Coatings with Superior Properties,” Ma- terials Science and Engineering A, Vol. 301, No. 1, 2001, pp. 80-89. doi:10.1016/S0921-5093(00)01382-4
|
[3]
|
E. Song, J. Ahn, S. Lee and N. Kim, “Effects of Critical Plasma Spray Parameter and Spray Distance on Wear Resistance of Al2O3 – 8 wt% TiO2 Coating Plasma- Sprayed with Nanopowders,” Surface & Coatings Tech- nology, Vol. 202, No. 2, 2008, pp. 3625-3632.
|
[4]
|
M. Gell, E. H. Jordan, Y. H. Sohn, D. Goberman, L. Shaw and T. D. Xiao, “Development and Implementation of Plasma Sprayed Nanostructured Ceramic Coatings,” Surface and Coating Technology, Vol. 146-147, No. 1, 2001, pp. 48-54. doi:10.1016/S0257-8972(01)01470-0
|
[5]
|
A. Ibrahim, H. Salem and S. Sedky, “Excimer Laser Sur- face Treatment of Plasma Sprayed Al2O3 + 13 wt% TiO2 Coatings,” Surface and Coating Technology, Vol. 203, No. 2, 2009, pp. 3579-3589.
doi:10.1016/j.surfcoat.2009.05.034
|
[6]
|
D. Goberman, Y. H. Sohn, L. Shaw, E. Jordan and M. Gell, “Microstructure Development of Al2O3 – 13 wt% TiO2 Plasma Sprayed Coatings Derived from Nanocry- stalline Powders,” Acta Materialia, Vol. 50, No. 5, 2002, pp. 1141-1152.
doi:10.1016/S1359-6454(01)00414-1
|
[7]
|
H. Gleiter, “Nanostuctured Materials: Basic Concepts and Microstructure,” Acta Materialia, Vol. 48, No. 1, 2000, pp. 1-29. doi:10.1016/S1359-6454(99)00285-2
|
[8]
|
M. Wang and L. Shaw, “Effects of Powder Man- ufacturing Methods on Microstructure and WearPerfor- mance of Plasma Sprayed Alumina-Titania Coaings,” Sur-face and Coating Technology, Vol. 202, No. 1, 2007, pp. 34-44. doi:10.1016/j.surfcoat.2007.04.057
|
[9]
|
J. Zhang, Z. Wang, P. Lin, W. LU, Z. Zhou and S. Jiang, “Effect of Sealing Treatment on the corrosion resistance of Plasma-Sprayed NiCrAl/Cr2O3 – 8 wt% TiO2 Coating,” Journal of Thermal Spray Technolog, Vol. 20, No. 3, 2010, pp. 508-513. doi:10.1007/s11666-010-9528-6
|
[10]
|
S. Liscano, L. Gil and M. H. Staia, “Effect of Sealing Tr- eatment on the Corrosion Resistance of Thermal-Sprayed Ceramic Coatings,” Surface and Coatings Technology, Vol. 188-189, No. 1, 2004, pp. 135-139.
doi:10.1016/j.surfcoat.2004.08.009
|
[11]
|
J. Creus, H. Idrissi, H. Mazille, F. Sanchette and P. Jacquot, “Corrosion Behaviour of Al/Ti Coating Elaborat- ed by Cathodic Arc PVD Process onto Mild Steel Sub- Strate,” Thin Solid Films, Vol. 346, No. 1-2, 1999, pp. 150-154.
|
[12]
|
A. Ibrahim and C. Berndt, “The Effect of High-Velocity Oxygen Fuel, Thermally Sprayed WC-Co on the High Cycle Fatigue (HCF) of Aluminum and Steel Thermally Sprayed with WC-Co,” Journal of Material Science, Vol. 33, No. 2, 1998, pp. 3095-3100.s Science, Vol. 33, 12, 199
|
[13]
|
A. Ibrahim and C. Berndt, “Fatigue and Deformations of HVOF Sprayed WC-Co Coatings vs. Hard Chrome Plat-ing,” International Thermal Spray Conference, Vol. 1, No. 1, 2003, pp. 377-380.
|
[14]
|
H. J. C. Voorwald, R. C. Souza, W. L. Pigatin and M. O. H. Cioffi, “Evaluation of WC-17Co and WC-10Co-4Cr Thermal Spray Coatings by HVOF on the Fatigue and Corrosion Strength of AISI 4340 Steel,” Surface and Coat- ings Technology, Vol. 190, No. 2, 2005, pp. 154-164.
doi:10.1016/j.surfcoat.2004.08.181
|
[15]
|
R. Ahmed and M. Hadfield, “Mechanisms of Fatigue Failure in Thermal Spray Coatings,” Journal of Thermal Spray Technology, Vol. 11, No. 3, 2002, pp. 333-349.
doi:10.1361/105996302770348727
|
[16]
|
Y. Wang, S. Jiang, M. Wang, S. Wang, T. D. Xiao and P. R. Strutt, “Abrasive Wear Characteristics of Plasma Spr- ayed Nanostructured Alumina/Titania Coatings,” Wear, Vol. 237, No. 1, 1999, pp. 176-185.
|
[17]
|
R. S. Lima and B. R. Marple, “Process-Property-Perfor- mance Relationships for Titanium Dioxide Coatings En-gineered from Nanostructured and Conventional Pow- ders,” Materials & Design, Vol. 29, No. 1, 2008, pp. 1845-1855. doi:10.1016/j.matdes.2008.03.005
|
[18]
|
R. S. Lima, S. Dimitrievska , M. N. Bureau, B. R. Marple, A. Petit, F. Mwale and J. Antoniou, “HVOF-Sprayed Nano TiO2-HA Coatings Exhibiting Enhanced Biocom- patibility,” Journal of Thermal Spray Technology, Vol. 19, No. 1-2, 2010, pp. 336-343.
doi:10.1007/s11666-009-9442-y
|
[19]
|
R.S. Lima and B. R. Marple, “Thermal Spray Coatings Engineered from Nanostructured Ceramic Powders for Structural, Thermal Barrier and Biomedical Applications: A Review,” Journal of Thermal Spray Technology, Vol. 16, No. 1, 2007, pp. 40-63.
doi:10.1007/s11666-006-9010-7
|
[20]
|
P. Bansal, N. P. Padture, A. Vasiliev, “Improved Interfa-cial Mechanical Properties of Al2O3 – 13 wt% TiO2 Plasmasprayed Coatings Derived from Nanocrystalline Powders,” Acta Materials, Vol. 51, No. 10, 2003, pp. 2959-2970. doi:10.1016/S1359-6454(03)00109-5
|