[1]
|
S. Toros, F. Ozturk and I. Kacar, “Review of Warm Forming of Aluminum-Magnesium Alloys,” Journal of Material Processing Technology, Vol. 207, No. 1-3, 2008, pp. 1-12. Hdoi:10.1016/j.jmatprotec.2008.03.057
|
[2]
|
J. A. Schey, “Surface Roughness Effects in Metalworking Lubrication,” Lubrication Engineering, Vol. 39, 1983, pp. 376-382.
|
[3]
|
D. J. Meierhofer and K. A. Stelson, “Measurement of the Interfacial Stresses in Rolling Using the Elastic Deformation of the Roll,” Journal of Engineering Industry, Vol. 109, 1987, pp. 362-369. Hdoi:org/10.1115/1.3187140
|
[4]
|
L. Lai-Seng and J. G. Lenard, “Study of Friction in Cold Strip Rolling,” Journal of Engineering Material Technology, Vol. 106, No. 2, 1984, pp. 139-146.
Hdoi:org/10.1115/1.3225688
|
[5]
|
M. P. F. Sutcliffe, “Flattening of Random Rough Surfaces in Metal Forming Processes,” Journal of Tribology, Vol. 121, 1999, pp. 433-440.
Hdoi:org/10.1115/1.2834086
|
[6]
|
M. P. F. Sutcliffe and H. R. Le, “Measurements of Surface Roughness in Cold Metal in the Mixed Lubrication Regime,” STLE Tribology Transactions, Vol. 43, 2000, pp. 39-44. Hdoi:org/10.1080/10402000008982310
|
[7]
|
H. R. Le and M. P. F. Sutcliffe, “A Friction Model for Cold Strip Rolling with Two-wavelength Surface Rough- ness in the Mixed Lubrication Regime,” Journal of Tribology, Vol. 125, 2003, pp. 670-677.
Hdoi:org/10.1115/1.1538191
|
[8]
|
H. S. Lin, N. Marsault and W. R. D. Wilson, “A Mixed Lubrication Model for Cold Strip Rolling—Part I: Theoretical,” STLE Tribology Transactions, Vol. 41, No. 3, 1998, pp. 317-326. Hdoi:org/10.1080/10402009808983754
|
[9]
|
P. M. Lugt and W. E. ten Papel, “The Influence of Elastic Deformation of the Roll and the Sheet in a Hydrodynamically Lubricated Cold Rolling Process,” Journal of Tribology, Vol. 117, No. 3, 1995, pp. 468-475.
Hdoi:org/10.1115/1.2831277
|
[10]
|
U. Saeed and G. A. Lenard, “A Comparison of Cold Rolling Theories Based on the Equilibrium Approach,” Journal Engineering Material Technology, Vol. 102, No. 2, 1980, pp. 223-228. Hdoi:org/10.1115/1.3224801
|
[11]
|
A. Cambiella, J. M. Benito, C. Pazos, J. Coca, M. Ratoi, and H. A. Spikes, “The Effect of Emulsifier Concentration on the Lubrication Properties of Oil-in-Water Emulsions,” Tribology Letters, Vol. 22, 2006, pp. 53-65.
Hdoi:org/10.1007/s11249-006-9072-1
|
[12]
|
Z. L. Qiu, W. Y. D. Yuen and A. K. Tieu, “Mixed-film Lubrication Theory and Tension Effects on Metal Rolling Processes,” Journal of Tribology, Vol. 121, No. 4, 1999, pp. 908-915. Hdoi:org/10.1115/1.2834154
|
[13]
|
S. W. Lo and K. J. Chung, “The Optimum Condition of Manufacturing a Smooth Engineered Surface by Internal-ironing Process,” Tribology Transactions, Vol. 41, 1998, pp. 563-571. Hdoi:org/10.1080/10402009808983783
|
[14]
|
T. Mizuno and M. Okamoto, “Effects of Lubricant Viscosity at Pressure and Sliding Velocity on Lubricating Conditions in the Compression- Friction Test on Sheet Metals,” Journal of Lubrication Technology, Vol. 104, 1982, pp. 53-59. Hdoi:org/10.1115/1.3253164
|
[15]
|
R. Ahmed and M P. F. Sutcliffe, “Identification of Surface Features on Cold Rolled Stainless Steel Strip,” Wear, Vol. 244, No. 1-2, 2000, pp. 61-70.
Hdoi:org/10.1016/S0043-1648(00)00442-7
|
[16]
|
H. R. Le and M. P. F. Sutcliffe, “Analysis of Surface Roughness of Cold-rolled Aluminium Foil,” Wear, Vol. 244, 2000, pp. 71-78.
Hdoi:org/10.1016/S0043-1648(00)00441-5
|
[17]
|
S. W. Lo and W. R. D. Wilson, “A Theoretical Model of Micro-Pool Lubrication in Metal Forming,” Journal of Tribology, Vol. 121, No. 4, 1999, pp. 731-738.
Hdoi:org/10.1115/1.2834129
|
[18]
|
M. P. F. Sutcliffe, H. R. Le and R. Ahmed, “Modeling of Micro-pit Evolution in Rolling or Strip-Drawing,” Journal of Tribology, Vol. 123, 2001, pp. 791-798.
Hdoi:org/10.1115/1.1352741
|
[19]
|
R. Ahmed and M. P. F. Sutcliffe, “An Experimental Investigation of Surface Pit Evolution during Cold-rolling or Drawing of Stainless Steel Strip,” Journal of Tribology, Vol. 123, 2001, pp. 1-7.
Hdoi:org/10.1115/1.1327580
|
[20]
|
M. P. F. Sutcliffe, R. Combarieu, M. Repoux and P. Montmitonnet, “Tribology of Plane Strain Compression Tests on Aluminium Strip using ToF-SIMS Analysis of Transfer Films,” Wear, Vol. 254, No. 1-2, 2003, pp. 65-79. Hdoi:org/10.1016/S0043-1648(02)00295-8
|
[21]
|
P. Montmitonnet, F. Delamare and B. Rizoulieres, “Tran-
sfer Layer and Friction in Cold Metal Strip Rolling Processes,” Wear, Vol. 245, 2000, pp. 125-135.
Hdoi:org/10.1016/S0043-1648(00)00473-7
|
[22]
|
F. Chambat, M. Lashermes and H. Hendricks, “Organometallic Compounds Produced during Aluminium Cold Rolling,” Lubrication Technology, Vol. 43, 1987, pp. 522-527.
|
[23]
|
H. R. Le, M. P. F. Sutcliffe, P. Z. Wang and G. T. Burstein, “Surface Oxide Fracture in Cold Aluminium Rolling,” Acta Materialia, Vol. 52, No. 4, 2004, pp. 911-920. Hdoi:org/10.1016/j.actamat.2003.10.027
|
[24]
|
A. Al-Sharif, K. Chamniprasart, K. R. Rajagopal and A. Z. Szeri, “Lubrication with Binary Mixtures: Liquid-liquid Emulsion,” Journal of Tribology, Vol. 115, 1993, pp. 46-55. Hdoi:org/10.1115/1.2920985
|
[25]
|
S. H. Wang, A. Z. Szeri and K. R. Rajagopal, “Lubrication with Emulsion in Cold Rolling,” Journal of Tribology, Vol. 115, No. 3, 1993, pp. 523-531.
Hdoi:org/10.1115/1.2921669
|
[26]
|
K. Chamniprasart, A. Al-Sharif, K. R. Rajagopal and A. Z. Szeri, “Lubrication with Binary Mixtures: Bubbly Oil,” Journal of Tribology, Vol. 115, No. 2, 1993, pp. 253-
260. Hdoi:org/10.1115/1.2920999
|
[27]
|
S. H. Wang, A. Al-Sharif, K. R. Rajagopal and A. Z. Szeri, “Lubrication with Binary Mixtures: Liquid-liquid Emulsion in an EHL Conjunction,” Journal of Tribology, Vol. 115, No. 2, 1993, pp. 515-522.
Hdoi:org/10.1115/1.2921668
|
[28]
|
A. Shirizly and J. G. Lenard, “Emulsions versus Neat Oils in the Cold Rolling of Carbon Steel Strips,” Journal of Tribology, Vol. 122, No. 3, 2000, pp. 550-556.
Hdoi:org/10.1115/1.555400
|
[29]
|
S. W. Lo, T. C. Yang, Y. A. Cian and K. C. Huang, “A Model for Lubrication by Oil-in-water Emulsions,” Journal of Tribology, Vol. 132, No. 1, 2010, pp. 011801-
011810. Hdoi:org/10.1115/1.4000274
|
[30]
|
B. X. Xu, “Bibliography of New Standards and Engineering Applications of Aluminium and Aluminium Alloy Products both at Home and Abroad,” Yingsheng Radio & Visual Press, Beijing, 2004.
|