[1]
|
G. L. Song, A. Atrens, D. Stjohn, J. Nairn and Y. Li, “The Electrochemical Corrosion of Pure Magnesium in 1N NaCl,” Corrossion Science, Vol. 39, No. 5, 1997, pp.855-856. doi:10.1016/S0010-938X(96)00172-2
|
[2]
|
A. J. Zozulin and D. E. Bartak, “Anodized Coatings for Magnesium Alloys,” Metal Finishing, Vol. 92 No. 3, 1994, pp.39-42.
|
[3]
|
J. E. Gray and B. Luan, “Protective Coatings on Magnesium and Its Alloys — A Critical Review,” Journal of Alloys Compounds, Vol. 336, No. 1-2, 2002, pp. 88-13. doi:10.1016/S0925-8388(01)01899-0
|
[4]
|
E. Ghali and W. Dietzel, “General and Localized Corrosion of Magnesium Alloys: A Critical Review,” Journal of Materials Engnerring and Performance, Vol. 13, No. 1, 2004, pp. 7-23. doi:10.1361/10599490417533
|
[5]
|
Y. Zhang, C. Yan, F. Wang, H. Lou and C. Cao, “Study on the. Environmentally Friendly Anodizing of AZ91D Magnesium Alloy,” Surface and Coating Technology, Vol. 161, No. 1, 2002, pp. 36-43. doi:10.1016/S0257-8972(02)00342-0
|
[6]
|
C. K. Mittal, “Chemical Conversion and Anodized Coatings,” Transactions of the Metal Finishers Association of India, Vol. 4, 1995, pp. 227-231.
|
[7]
|
A. K. Ehmeda “Anodizing of Magnesium Alloy (AZ91D) in Extreme Alkaline and Acidic Media,” MSC Thesis, Tabbin Institute for Metallurgical Studies, Cairo, 2008
|
[8]
|
W. Li , L. Zhu and H. Liu , “Preparation of Hydrophobic Anodic Film on AZ91D Magnesium Alloy in Silicate Solution Containing Silica Sol,” Surface and Coatings Technology, Vol. 201, No. 6, 2006, pp. 2573-2577. doi:10.1016/j.surfcoat.2006.04.068
|
[9]
|
C. S. Wu, Z. Zhang, F. H. Cao, L. J. Zhang, J. Q. Zhang and C. N. Cao, “Study on the Anodizing of AZ31 Magnesium Alloys in Alkaline Borate Solutions,” Applied Surface Science, Vol. 253, No. 8, 2007, pp. 3893-3898. doi:10.1016/j.apsusc.2006.08.020
|
[10]
|
M. Hara, K. Jimatsuda, W. Yamauchi, M. Sakaguchi and T. Yoshikata. “Optimization of Environmentally Friendly Anodic Oxide Film for Magnesium Alloys,” Materials Transactions, Vol. 47, No. 4, 2006, pp. 1013-1019. doi:10.2320/matertrans.47.1013
|
[11]
|
O. Khaselev, J. Yahalom and J. Electrochem. “Constant Voltage Anodizing of Mg-Al Alloys in KOH-Al (OH) (3) Solutions,” Journal of the Electrochemical Society, Vol. 145, No. 1, 1998, pp. 190-193. doi:10.1149/1.1838234
|
[12]
|
A. K. Sharma, R. Uma Rani and K. Giri, “Studies on Anodization of Magnesium Alloy for Thermal Control Applications,” Metal Finishing, Vol. 95, No. 3, 1997, pp.43-54. doi:10.1016/S0026-0576(97)86772-4
|
[13]
|
J. Yahalom and J. Zahavi, “Experimental Evaluation of Some Electrolytic Breakdown Hypotheses,” Electrochimica Acta, Vol. 16, No. 5, 1971, pp. 603. doi:10.1016/0013-4686(71)85169-1
|
[14]
|
R. F. Zhang, D. Y. Shan, R. S. Chen and E. H. Han, “Effects of Electric Parameters on Properties of Anodic Coatings Formed on Magnesium Alloys,” Materials Chemistry and Physics, Vol. 107, No. 2-3, 2008, pp. 356-363. doi:10.1016/j.matchemphys.2007.07.027
|
[15]
|
Y. Zhang and C. Yan, “Development of Anodic Film on Mg Alloy AZ91D,” Surface and Coatings Technology, Vol. 201, No. 6, 2006, pp. 2381-2386. doi:10.1016/j.surfcoat.2006.04.015
|
[16]
|
X. Zhou, G. E. Thompson, P. Skeldon, G. C. Wood, K. Shimizu and H. Habazaki, “Film Formation and Detachment During Anodizing of Al-Mg Alloys”, Corrosion Science, Vol. 41, No. 8, 1999, pp. 1599-1605. doi:10.1016/S0010-938X(99)00007-4
|
[17]
|
H. F. Guo, M. Z. An, H. B. Huo and S. Xu, “Microstructure Characteristic of Ceramic Coatings Fabricated on Magnesium Alloys by Micro-Arc Oxidation in Alkaline Silicate Solutions,” Applied Surface Science, Vol. 252, No. 22, 2005, pp. 2187-2191. doi:10.1016/j.apsusc.2005.09.067
|
[18]
|
P. Zhang, X. Nie and D. O. Northwood, “Influence of Coating Thickness on the Galvanic Corrosion Properties of Mg Oxide in an Engine Coolant,” Surface and Coating Technology, Vol. 203, No. 20-21, 2009, pp. 3271-3277. doi:10.1016/j.surfcoat.2009.04.012
|
[19]
|
S. Sun, J. Liu, C. Yan and F. Wang, “A Novel Process for Electroless Nickel Plating on Anodized Magnesium Alloy,” Applied Surface Science, Vol. 254, No. 16, 2008, pp. 5016-5022. doi:10.1016/j.apsusc.2008.01.169
|
[20]
|
S. Adachi and K.Nakata, “A Novel Process for Electroless Nickel Plating on Anodized Magnesium Alloy,” Plasma Processes and Polymers, Vol. 4, No. S1, 2007, pp. 512-515. doi:10.1002/ppap.200731217
|