[1]
|
A. Erdemir, “Review of Engineered Tribological Interfaces for Improved Boundary Lubrication,” Tribology International, Vol. 38, No. 3, 2005, pp. 249-256.
doi:10.1016/j.triboint.2004.08.008
|
[2]
|
A. O. Lebeck, “Parallel Sliding Load Support in the Mixed Friction Regime, Part 2. Evaluation of the Mechanisms”, Journal of Tribology, Vol. 109, No. 1, 1987, pp. 196-205. doi:10.1115/1.3261319
|
[3]
|
X. Wang, K. Kato and K. Adachi, “The Lubrication Effect of Micro-Pits on Parallel Sliding Faces of SiC in Water,” Tribology Transactions, Vol. 45, No. 3, 2002, pp. 294-301. doi:10.1080/10402000208982552
|
[4]
|
X. Wang, K. Kato, K. Adachi and K. Aizawa, “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” Tribology International, Vol. 36, No. 3, 2003, pp. 189-197.
doi:10.1016/S0301-679X(02)00145-7
|
[5]
|
S. Pride, K. Folkert, P. Guichelaar and I. Etsion, “Effect of Micro-Surface Texturing on Breakaway Torque and Blister Formation on Carbon-Graphite Faces in a Mechanical Seal,” Lubrication engineering, Vol. 58, No. 10, 2002, pp. 16-21.
|
[6]
|
A. Kovalchenko, O. Ajayi, A. Erdemir, G. Fenske and I. Etsion, “The Effect of Laser Surface Texturing on Transitions in Lubrication Regimes during Unidirectional Sliding Contact,” Tribology International, Vol. 38, No. 3, 2005, pp. 219-225. doi:10.1016/j.triboint.2004.08.004
|
[7]
|
A. Kovalchenko, O. Ajayi, A. Erdemir and G. Fenske, “Friction and Wear Behavior of Laser Textured Surface under Lubricated Initial Point Contact,” Wear, Vol. 271, No. 9-10, 2011, pp. 1719-1725.
|
[8]
|
G. Dumitru, V. Romano, H. P. Weber, S. Pimenov, T. Kononenko, M. Sentis, J. Hermann and S. Bruneau, “Femtosecond Laser Ablation of Diamond-Like Carbon Films,” Applied Surface Science, Vol. 222, No. 1-4, 2004, pp. 226-233.
|
[9]
|
Y. Ohue and Y. Senno, “Effect of Fine Particle Bombarding on Rolling Fatigue Strength of Carburized Steel,” Tribology Online, Vol. 3, No. 2, 2008, pp. 157-162.
|
[10]
|
K. Adachi, K. Otsuka, X. Wang and K. Kato, “Effect of Surface Texture on Water Lubrication Properties of Advanced Ceramics,” JSAT Journal, Vol. 50, No. 2, 2006, pp. 107-110.
|
[11]
|
Y. Haiwu, X. Wang and F. Zhou, “Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure between Conformal Contacting Surfaces,” Tribology Letters, Vol. 37, No. 2, 2010, pp. 123-130.
doi:10.1007/s11249-009-9497-4
|
[12]
|
T. Nanbu, N. Ren, Y. Yasuda, D. Zhu and Q. J. Wang, “Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion,” Tribology Letters, Vol. 29, No. 3, 2008, pp. 241-252. doi:10.1007/s11249-008-9302-9
|
[13]
|
C. H. Venner and A. A. Lubrecht, “Multilevel Methods in Lubrication,” Elsevier Science, 2000.
|
[14]
|
K. L. Johnson, “Contact Mechanics,” Cambridge University Press, Cambridge, 1987.
|
[15]
|
B. J. Hamrock and D. Dowson, “Ball Bearing Lubrication: The Elastohydrodynamics of Elliptical Contacts,” Wiley, 1981.
|