[1]
|
V. M. Lebedev, V. T. Lebedev, I. N. Ivanova, S. P. Orlov and D. N. Orlova, “Structure of Aluminum Alloys Irradi- ated with Reactor Neutrons,” Physics of the Solid State, Vol. 52, No. 5, 2010, pp. 996-999. doi:10.1134/S1063783410050239
|
[2]
|
J. V. De Langkruis, M. S. Vossenberg, W. H. Kool and S. Van der Zwaag, “A Study on the ?’ and ?” Formation Kinetics in AA6063 Using Differential Scanning Calo- rimetry,” Journal of Materials Engineering and Perfor- mance, Vol. 12, No. 4, 2003, pp. 408-413.
|
[3]
|
O. Myhr, ?. Grong and K. O. Pedersen, “A Combined Precipitation, Yield Strength and Work Hardening Model for Al-Mg-Si Alloys,” Metallurgical and Materials Trans- actions A, Vol. 41, No. 9, 2010, pp. 2276-2289. doi:10.1007/s11661-010-0258-7
|
[4]
|
D. G. Eskin, V. Massardier and P. Merle, “A Study of High-Temperature Precipitation in Al-Mg-Si Alloys with an Excess of Silicon,” Journal of Materials Science, Vol. 34, No. 4, 1999, pp. 811-820. doi:10.1023/A:1004585216084
|
[5]
|
K. Fukui, M. Takeda and T. Endo, “The Metastable Phase Responsible for Peak Hardness in the Ageing Tempera- ture Range 403 - 483 K for an Al-Mg-Si Ternary Alloy,” Journal of Materials Science, Vol. 40, No. 2, 2005, pp. 3317-3320. doi:10.1007/s10853-005-2710-4
|
[6]
|
C. D. Mariora, S. J. Andersen, H. W. Zandbergen and R. Holmestad, “The Influence of Alloy Composition on Pre- cipitates of the Al-Mg-Si System,” Metallurgical and Materials Transactions A, Vol. 36, No. 3, 2005, pp. 691- 702. doi:10.1007/s11661-005-0185-1
|
[7]
|
R. S. Yassar, M. Cai, D. P. Field, X. Chen and J. Asay, “The Effect of Shock-Loading on the Aging Behavior of an Al-Mg-Si Alloy,” Journal of Materials Science, Vol. 41, No. 6, 2006, pp. 1711-1720. doi:10.1007/s10853-006-2933-z
|
[8]
|
M. Takeda, F. Ohkubo, T. Shirai and K. Fukui, “Stability of Metastable Phases and Microstructures in the Ageing Process of Al-Mg-Si Ternary Alloys,” Journal of Materi- als Science, Vol. 33, No. 9, 1998, pp. 2385-2390.
doi:10.1023/A:1004355824857
|
[9]
|
L. Zhen, W. D. Fei, S. B. Kang and H. W. Kim, “Precipi- tation Behaviour of Al-Mg-Si Alloys with High Silicon Content,” Journal of Materials Science, Vol. 32, No. 7, 1997, pp. 1895-1902. doi:10.1023/A:1018569226499
|
[10]
|
R. C. Dorward, “Preaging Effects in AI-Mg-Si Alloys Con- taining 0.6 to 0.9 Pct Mg2Si,” Metallurgical and Materi- als Transactions B, Vol. 4, No. 2, 1973, pp. 507-512. doi:10.1007/BF02648703
|
[11]
|
C. D. Mariora, H. Nordmark, S. J. Andersen and R. Holm- estad, “Post-β’’ Phases and Their Influence on Micro- structure and Hardness in 6xxx Al-Mg-Si Alloys,” Journal of Materials Science, Vol. 41, No. 2, 2006, pp. 471- 478. doi:10.1007/s10853-005-2470-1
|
[12]
|
C. S. T. Chang and J. Banhart, “Low-Temperature Dif- ferential Scanning Calorimetry of an Al-Mg-Si Alloy,” Metallurgical and Materials Transactions A, Vol. 42, No. 7, 2011, pp. 1960-1964. doi:10.1007/s11661-010-0596-5
|
[13]
|
K. D. Woo, J. S. Lee and S. W. Kim, “Calorimetric In- vestigation of Precipitation Kinetics in AI-Mg-Si-X(Cr, Be) Alloys,” Metals and Materials International, Vol. 5, No. 4, 1999, pp. 363-368.
|
[14]
|
M. Vedani, G. Angella, P. Bassani, D. Ripamonti and A. Tuissi, “DSC Analysis of Strengthening Precipitates in Ultrafine Al-Mg-Si Alloys,” Journal of Thermal Analysis and Calorimetry, Vol. 87, No. 1, 2007, pp. 277-284. doi:10.1007/s10973-006-7837-2
|
[15]
|
Y. Birol, “DSC Analysis of the Precipitation Reaction in AA6005 Alloy,” Journal of Thermal Analysis and Calo- rimetry, Vol. 93, No. 3, 2008, pp. 977-981. doi:10.1007/s10973-007-8686-3
|
[16]
|
A. Hayoune and D. Hamana, “Structural Evolution during Non-Isothermal Ageing of a Dilute Al-Cu Alloy by Dila- tometric Analysis,” Journal of Alloys and Compounds, Vol. 474, No. 1-2, 2009, pp. 118-123.
doi:10.1016/j.jallcom.2008.06.070
|
[17]
|
A. Hayoune and D. Hamana, “A Dilatometric and High- Temperature X-Ray Diffraction Study of Cold Deformation Effect on the Interaction between Precipitation, Recovery and Recrystallization Reactions in Al-12 wt.% Mg Alloy,” Materials Science and Engineering: A, Vol. 527, No. 27-28, 2010, pp. 7261-7264.
doi:10.1016/j.msea.2010.08.011
|
[18]
|
G. W. Smith, W. J. Baxter and R. K. Mishra, “Precipita- tion in 339 and 2124 Aluminum: A Caveat for Calo- rimetry,” Journal of Materials Science, Vol. 35, No. 15, 2000, pp. 3871-3880. doi:10.1023/A:1004837615783
|
[19]
|
G. A. Edwards, K. Stiller, G. L. Dunlop and M. J. Couper, “The Precipitation Sequence in Al-Mg-Si Alloys,” Acta Materialia, Vol. 46, No. 11, 1998, pp. 3893-3904. doi:10.1016/S1359-6454(98)00059-7
|
[20]
|
C. D. Marioara, S. J. Andersen, J. Jansen and H. W. Zandbergen, “The Influence of Temperature and Storage Time at RT on Nucleation of the β” Phase in a 6082 Al-Mg-Si Alloy,” Acta Materialia, Vol. 51, No. 3, 2003, 789-796. doi:10.1016/S1359-6454(02)00470-6
|