K. Laoubi, E. El-Salakawy and B. Benmokrane, “Creep and Durability of Sand-Coated Glass FRP Bars in Concrete Elements under Freeze/Thaw Cycling and Sustained Loads,” Cement and Concrete Composites, Vol. 28, No. 10, 2006, pp. 869-878. http://dx.doi.org/10.1016/j.cemconcomp.2006.07.014

has been cited by the following article:

• TITLE: Freeze-Thaw Effect on Coarse Sand Coated Interface between FRP and Concrete

  AUTHORS: Keunhee Cho, Sung Yong Park, Sung Tae Kim, Jeong-Rae Cho, Byung-Suk Kim

  KEYWORDS: Freeze-Thaw; Coarse Sand Coating; Interface Failure; FRP; Concrete

  JOURNAL NAME: Engineering, Vol.5 No.10, September 17, 2013

  ABSTRACT: This paper examines the effect of freezing and thawing on the coarse sand coating chosen to achieve the composition of FRP and concrete in FRP-concrete composite deck. Push-out test specimens with dimensions of 100 × 100 × 450 mm were subjected to repeated freeze-thaw cycles under wet conditions ranging from -18℃± 2℃ to 4℃ ± 2℃. The failure strength of the interface and the deformation of FRP at failure exhibited by the specimens that experienced 300 freezing-thawing cycles showed a difference of merely 5% compared to those of the specimens that were not subjected to freeze-thaw. This indicates that coarse sand coating is not affected by freezing-thawing cycles and the FRP-concrete composite deck owns sufficient applicability in terms of durability against freezing-thawing.