A. Bertsch, J. Y. Jézéquel and J. C. André, “Study of the Spatial Resolution of A New 3D Microfabrication Process: The Microstereophotolithography Using A Dynamic Mask-Generator Technique,”Journal of Photochemistry and Photobiology A: Chemistry, 1997. Vol.107, No.1-3, pp. 275-281. doi:10.1016/S1010-6030(96)04585-6

has been cited by the following article:

• TITLE: Maskless Microscopic Lithography through Shaping Ultraviolet Laser with Digital Micro-mirror Device

  AUTHORS: Xiang-Yu Ding, Yu-Xuan Ren, Rong-De Lu

  KEYWORDS: Digital Micro-mirror Device (DMD); Laser Shaping; Maskless Projection; Soft Lithography

  JOURNAL NAME: Optics and Photonics Journal, Vol.3 No.2B, July 22, 2013

  ABSTRACT: Laser shaping was introduced to maskless projection soft lithography by using digital micro-mirror device (DMD). The predesigned intensity pattern was imprinted onto the DMD and the input laser beam with a Gaussian or quasi-Gaussian distribution will carry the pattern on DMD to etch the resin. It provides a method of precise control of laser beam shapes andphoton-induced curing behavior of resin. This technology provides an accurate micro-fabrication of microstructures used for micro-systems. As a virtual mask generator and a binary-amplitude spatial light modulator, DMD is equivalent to the masks in the conventional exposure system. As the virtual masks and shaped laser beam can be achieved flexibly, it is a good method of precision soft lithography for 2D/3D microstructures.