IEC 61223-3-5. International Standard IEC 61223-3-5. Evaluation and Routine Testing in Medical Imaging Departments—Part 3-5: Acceptance Tests—Imaging Performance of Computed Tomography X-Ray Equipment; 2013.

has been cited by the following article:

• TITLE: Assessment of Image Quality Parameters for Computed Tomography in the City of Yaoundé

  AUTHORS: Calvin Didier Njiki, Joseph Eric Martial Ndjaka Manyol, Yolande Ebele Yigbedeck, Daniel William Abou’ou, Blaise Clovis Yimele, Jean Faustin Sabouang

  KEYWORDS: CT, Image Quality, Catphan 700

  JOURNAL NAME: Open Journal of Radiology, Vol.8 No.1, March 13, 2018

  ABSTRACT: Performance evaluation of computed tomography is not significant in the Republic of Cameroon in general and more particularly in the city of Yaoundé. Therefore, this work aimed to analyze image performances of 05 CT scanners in 05 medical facilities in the city of Yaoundé, by using the Catphan 700 phantom and test procedures of the Atomic Energy Agency. Five quality control tests were performed on each CT-Scanner. All the CT scanners evaluated showed good results and were not disapproved in three of the five tests performed. The difference between the measured spatial resolution for each of the five CT scanners and the spatial resolution specified by the manufacturer was very high. The low contrast resolution of four of the five CT scanners was found low when compared to the low contrast resolution specified by the manufacturers.