Muwanguzi, A.J.B., Karasev, A.V., Byaruhanga, J.K. and Par, J. (2014) Effect of Different Factors on Low Temperature Degradation of Hematite Iron Ore Reduction. Metallurgical Research and Technology, 111, 57-66.
https://doi.org/10.1051/metal/2014014

has been cited by the following article:

• TITLE: Application of Different Models for the Prediction of the Kinetics of Direct Reduction of Natural Iron Ores

  AUTHORS: Abraham J. B. Muwanguzi, Aliaksandr Alevanau, Joseph K. Byaruhanga

  KEYWORDS: Iron Ore, Reduction Kinetics, Solid Conversion, Reduction Rate, DR Estimation Models

  JOURNAL NAME: Geomaterials, Vol.7 No.4, October 25, 2017

  ABSTRACT: Simulation of the direct reduction conditions was performed in a laboratory furnace. Lump samples from natural hematite iron ore were reduced by a gas mixture of H2 and CO (H2/CO =1.5) at temperatures of 700°C, 800°C and 900°C. The effect of reduction temperature on the reduction degree, reduction rate of samples and carbon deposition were investigated and discussed in this study. The thermo-gravimetric data obtained from the reduction experiments was run in a programme that calculates the solid conversion rate. Also, three models: 1) Grain Model (GM), 2) Volumetric Model (VM), and 3) the Random Pore Model (RPM), were used to estimate the reduction kinetics of natural iron ores. It was found that the RPM model result agreed best with the obtained experimental results. Furthermore, it gave better predictions of the natural iron oxide conversion and thereby the reduction kinetics.