Hart-Smith, L.J. (2003) Adhesively Bonded Joints for Fibrous Composite Struc-tures. In: Tong, L.Y. and Soutis, C., Eds., Recent Advances in Structural Joints and Repair for Composite Materials, Kluwer Academic Publishers, 173-210. https://doi.org/10.1007/978-94-017-0329-1_6

has been cited by the following article:

• TITLE: The Strength Characters of C/C Composite Material with Opening Hole and Typical Application

  AUTHORS: Zhiyong Tan, Changwan Min, Xuyun Zhan, Weili Dong

  KEYWORDS: Composite Material, Opening’s Characteristics, Joint Strength

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.5 No.1, January 4, 2017

  ABSTRACT: Research on the opening hole and connecting problem of C/C composite material was conducted. The strength characteristics of plate with opening hole were tested and the applicability of strength criteria focused on particular point was analyzed. Conclusion is obtained that obviously conservative to evaluate open hole and joint strength by hole-edge stress. Based on these, high and nor-mal temperature strength test of typical circular shaft was completed, proving that comprehensive joint performance can be significantly improved by appropriately optimized design.