[1]
|
J. Fowler and J. Robinson, “Measurement and Improvement of Manufacturing Capacity,” SEMATECH, Inc, 1995.
|
[2]
|
D. Sumanth, “Productivity Engineering and Management,” McGraw-Hill, New York, 1994.
|
[3]
|
M. Oxenburgh, and P. Marlow, “The Productivity Assessment Tool: Computer-Based Cost Benefit Analysis Model for the Economic Assessment of Occupational Health and Safety Interventions in the Workplace,” Journal of Safety Research, ECON Proceedings Paper, 2005, pp. 209-214.
|
[4]
|
N. Van Hop, N. Sumate and N. Sitawatch, “Modifying Integrated Model for Manufacturing Process Improvement,” Proceedings of the International Conference on Simulation and Modeling, 2005, pp. 38-47.
|
[5]
|
W. Yung, “An Integrated Model for Manufacturing Process Improvement,” European Journal of Operational Research, No. 61, 1996, pp. 39-43.
|
[6]
|
R. Radharamanan, L. P. Godoy and K. I. Watanabe, “Quality and Productivity Improvement in a Custom- Made Furniture Industry Using Kaizen,” Computers & Industrial Engineering, Vol. 31, No. 1-2, 1996, pp. 471- 474. doi:10.1016/0360-8352(96)00177-5
|
[7]
|
S. Huang, J. Dismukes, J. Shi, Q. Su, M. Razzak, R. Bodhale and D. Robinson, “Manufacturing Productivity Improvement Using Effectiveness Metric and Simulation Analysis,” International Journal of Production Research, Vol. 41, No. 3, 2003, pp. 513-527.
doi:10.1080/0020754021000042391
|
[8]
|
F. Andris and N. Benjamin, “Method Standard and Work Design,” 11th Edition, McGraw-Hill, New York & London, 2004, pp. 335-348.
|
[9]
|
R. N. Mefford, “Increasing Productivity in Global Firms: The CEO Challenge,” Journal of International Management, Vol. 15, No. 3, 2009, pp. 262-272.
doi:10.1016/j.intman.2008.12.004
|
[10]
|
P. Kuhlang, T. Edtmayr and W. Sihn, “Methodical Approach to Increase Productivity and Reduce Lead Time in Assembly and Production-Logistic Processes,” CIRP Journal of Manufacturing Science and Technology, in Press, 2011, Available Online.
doi:10.1016/j.cirpj.2011.02.001
|
[11]
|
R. H. A. Seidel and G. Arndt, “Productivity Improvement in Job Shop Production,” CIRP Annals—Manufacturing Technology, Vol. 37, No. 1, 1988, pp. 421-424.
|
[12]
|
A. Gunasekaran, A. R. Korukonda, I. Virtanen and P. Yli-Olli, “Improving Productivity and Quality in Manufacturing Organizations,” International Journal of Production Economics, Vol. 36, No. 2, 1994, pp. 69-183.
doi:10.1016/0925-5273(94)90022-1
|
[13]
|
R. Maruta, “Transforming Knowledge Workers into Innovation Workers to Improve Corporate Productivity,” Knowledge-Based Systems, in Press, 2011, Available Online. doi:10.1016/j.knosys.2011.06.017
|
[14]
|
R. Mayer, “Production of Operations Management,” 3rd Edition, McGraw-Hill, New York & London, 1975, pp 516-517.
|
[15]
|
G. Kanawaty, “Introduction to Work Study,” 3rd Edition, International Labor Organization, 1993, pp. 140-381.
|
[16]
|
S. Drozdowsky and S. Whittaker, “Workplace Hazards to Reproduction and Development: A Resource for Workers, Employers, Health Care Providers, and Health & Safety Personnel,” Washington State Department of Labor & Industries, 2000.
|