[1]
|
M. Kerr, A. Wilson and S. Marich, “The Epidemiology of Squats and Related Rail Defects,” Proceedings of CORE 2008 Conference on Railway Engineering: Rail; The Core of Integrated Transport, Perth, 2008, pp. 83-96.
|
[2]
|
S. Marichand S. Mackie, “The Development of Squat Defects under High Axle Load Operations,” CORE 2002: Cost Efficient Railways through Engineering, Wollongong, 2002, pp. 17-26.
|
[3]
|
G. Zumpano and M. Meo, “A New Damage Detection Technique Based on Wave Propagation for Rails,” International Journal of Solids and Structures, Vol. 43, No. 5, 2005, pp. 1023-1047.
|
[4]
|
P. C. Johnson and S. Wise, “Significance of a Detection of Defects in Rails,” Non-Destructive Testing, Vol. 3, No. 2, 1970, pp. 111-116. doi:10.1016/0029-1021(70)90100-3
|
[5]
|
D. E. Bray and M. Najm, “Ultrasonic Angle-Beam Inspection through the Cold-Worked Layer in Railroad Rail,” NDT & E International, Vol. 18, No. 3, 1985, pp. 139-145. doi:10.1016/0308-9126(85)90198-1
|
[6]
|
R. Clark, “Rail Flaw Detection: Overview and Needs for Future Developments,” NDT & E International, Vol. 37, No. 2, 2004, pp. 111-119.
doi:10.1016/j.ndteint.2003.06.002
|
[7]
|
D. Wu, G. Zenzinger, W. Karpen and G. Busse, “Nondestructive Inspection of Turbine Blades with Lock-In Thermography,” Materials Science Forum, Vol. 210-213, 1996, pp. 289-295.
doi:10.4028/www.scientific.net/MSF.210-213.289
|
[8]
|
C. Meola, R. D. Maio, N. Roberti and G. M. Carlomagno, “Application of Infrared Thermography and Geophysical Methods for Defect Detection in Architectural Structures,” Engineering Failure Analysis, Vol. 12, No. 6, 2005, pp. 875-893. doi:10.1016/j.engfailanal.2004.12.030
|
[9]
|
C. Meola, G. M. Carlomagno, A. Squillace and A. Vitiello, “Non-Destructive Evaluation of Aerospace Materials with Lock-In Thermography,” Measurement Science and Technology, Vol. 13, No. 3, 2006, pp. 380-389.
|
[10]
|
D. Wu, A. Salerno, U. Malter, R. Aoki, R. Kochendorfer, P. K. Kachele, K. Woithe, K. Pfister and G. Busse, “Inspection of Aircraft Structural Components Using LockIn-Thermgraphy,” Quantitative Infrared Thermography, QIRT 96, Edizione ETS, Pisa, 1997.
|
[11]
|
C. Meola, G. M. Carlomagno, A. Squillace and G. Giorleo, “Non-Destructive Control of Industrial Materials by Means of Lock-In Thermography,” Measurement Science and Technology, Vol. 13, No. 10, 2002, pp. 1583-1590.
doi:10.1088/0957-0233/13/10/311
|
[12]
|
A. Dillenz, T. Zweschper, G. Riegert and G. Busse, “Progress in Phase Angle Thermography,” Review of Scientific Instruments, Vol. 74, No. 1, 2003, pp. 417-421.
doi:10.1063/1.1524010
|
[13]
|
W. Bai and B. S. Wong, “Photothermal Models for LockIn Thermographic Evaluation of Plates with Finite Thickness under Convection Conditions,” Journal of Applied Physics, Vol. 89, No. 6, 2001, pp. 3275-3283.
doi:10.1063/1.1344916
|
[14]
|
G. Busse, D. Wu and W. Karpen, “Thermal Wave Imaging with Phase Sensitive Modulated Thermography,” Journal of Applied Physics, Vol. 71, No. 8, 1992, pp. 39623966. doi:10.1063/1.351366
|
[15]
|
C. D. Wallbrink, S. Wade and R. Jones, “The Effect of Size on the Quantitative Estimation of Defect Depth in Steel Structures Using Lock-In Thermography,” Journal of Applied Physics, Vol. 101, No. 10, 2007, Article ID: 104907. doi:10.1063/1.2732443
|
[16]
|
M. Kerr and A. Wilson, “Railcorp Squat Samples,” Railcorp Report, Australia, 2008.
|
[17]
|
NEiNastran User’s Manual, Version 10, Noran Engineering, Inc., California, 2010.
|
[18]
|
FEMAP, “Finite Element Modelling and Post Processing?,” Version 10.0.2, Structural Dynamics Research Corporation, Pennsylvania, 2009.
|