[1]
|
J. Schive, “Fatigue of Structures and Materials, Dordrecht,” Kluwer Academic, Boston, 2001.
|
[2]
|
L. C. H. Ricardo, “Numerical Determination of Crack Opening and Closure Stress Intensity Factors,” Engineering Letters, Vol. 17, No. 3, 2009, 5 p.
|
[3]
|
A. Ray, “Stochastic Measure of Fatigue Crack Damage for Health Monitoring of Ductile Alloy Structures,” Structural Health Monitoring, Vol. 3, No. 3, 2004, pp. 245-263. doi:10.1177/1475921704045626
|
[4]
|
S. Gupta, A. Ray and E. Keller, “Symbolic Time Series Analysis of Ultrasonic Data for Early Detection of Fatigue Damage,” Mechanical Systems and Signal Processing, Vol. 21, No. 2, 2007, pp. 866-884.
doi:10.1016/j.ymssp.2005.08.022
|
[5]
|
S. Gupta and A. Ray, “Real-Time Fatigue Life Estimation in Mechanical Structures,” Measurement Science and Technology, Vol. 18, No. 7, 2007, pp. 1947-1957.doi:10.1088/0957-0233/18/7/022
|
[6]
|
B. P. Chandra, C. N. Xu, H. Yamada and X. G. Zheng, “Luminescence Induced by Elastic Deformation of ZnS:Mn Nanoparticles,” Journal of Luminescence, Vol. 130, No. 3, 2010, pp. 442-450.
doi:10.1016/j.jlumin.2009.10.010
|
[7]
|
B. P. Chandra, “Mechanoluminescence,” In: R. D. Vij, Ed., Luminescence of Solids, Plenum Press, New York, 1998, p. 368. doi:10.1007/978-1-4615-5361-8_10
|
[8]
|
J. T. Dickinson, E. E. Donaldson and M. K. Park, “The Emission of Electrons and Positive Ions from Fracture of Materials,” Journal of Materials Science, Vol. 16, No. 10, 1981, pp. 2897-2911. doi:10.1007/BF02402856
|
[9]
|
J. T. Dickinson, L. C. Jensen, S. Lee, L. Scudiero and S. C. Langford, “Fractoemission and Electrical Transients Due to Interfacial Failure,” Journal of Adhesion Science and Technology, Vol. 8, No. 11, 1994, pp. 1285-1309.doi:10.1163/156856194X00618
|
[10]
|
MPPC Technical Information, 2009.
http://sales.hamamatsu.com/de/produkte/solid-state-division/si-photodiode-series/mppc.php?src=hp
|
[11]
|
S. Aman and J. Tomas, “Mechanolumineszenz W?hrend der Nasszerkleinerung von Feinen Partikeln,” Chemie Ingenieur Technik, Vol. 76, No. 1-2, 2004, pp. 81-83.doi:10.1002/cite.200403301
|
[12]
|
S. Aman and J. Tomas, “On-Line Determination of Particle Size during Fine Grinding Based on Luminescence Properties of Solid,” International Journal of Mineral Processing, Vol. 74, No. 2, 2005 pp. 345-348.doi:10.1016/j.minpro.2004.07.006
|
[13]
|
S. Aman, J. Tomas, M. Molitor, A. Aman and M. Pieper, “Sensoreinrichtung und Verfahren zur Vorhersage Eines Sch?digungszustands von Bauteilen,” DE 10 2011 103 011.9 2011.
|
[14]
|
S. Aman, J. Tomas and A. N. Streletskii, “Fast Modification of Microdischarge Emission Bands by Fracture of Sugar,” Chinese Physics Letters, Vol. 28, No. 8, 2011, Article ID: 087802. doi:10.1088/0256-307X/28/8/087802
|
[15]
|
D. Gross and T. Seelig, “Fracture Mechanics. With an Introduction to Micromechanics,” Springer, Berlin, Vol. 39, 2011.
|