Shouichiro Iio
Shinshu University, JAPAN
Associate Professor
Email: shouiio@shinshu-u.ac.jp
Qualifications
2004 Ph.D., Mechanical Engineering, Miyazaki University, Japan
2000 M.Sc., Mechanical Engineering, Miyazaki University, Japan
1998 B.Sc., Mechanical Engineering, Miyazaki University, Japan
Research Fields
Jet Flow
Fluid Control and Measurement
Fluid Machinery
Pneumatic System
Publications (selected)
-
Y. Haneda, A. Souma, H. Kurasawa, S. Iio, T. Ikeda, 2014. Enhancement of impinging jet heat transfer using two parallel confining plates mounted near rectangular nozzle exit. Journal of Fluids, vol. 2014, Article ID 873684. Available from:
http://dx.doi.org/10.1155/2014/873684
-
T. Uchiyama, H. Fukuhara, S. Iio, T. Ikeda, 2013. Numerical simulation of water flow through a nano-hydraulic turbine of waterfall-type by particle method. International Journal of Rotating Machinery, vol. 2013, Article ID 473842. Available from:
http://dx.doi.org/10.1155/2013/473842
-
T. Uchiyama, M. Kobayashi, S. Iio, T. Ikeda, 2013. Direct numerical simulation of a jet issuing from rectangular nozzle by the vortex in cell method. Open Journal of Fluid Dynamics, vol. 3, pp.321-330.
Available from:http://dx.doi.org/10.4236/ojfd.2013.34039
-
T. Uchiyama, M. Kobayashi, S. Iio, T. Ikeda, Y. Yoshii, 2013. Numerical simulation of a rectangular jet by the vortex in cell method. International Journal of Transport Phenomena, vol. 13, pp.245-255.
-
S. Iio, K. Hirashita, Y. Katayama, Y. Haneda, T. Ikeda, T. Uchiyama, 2013. Jet flapping control with acoustic excitation. Journal of Flow Control, Measurement & Visualization, vol. 1, pp.49-56.
Available from:http://dx.doi.org/10.4236/jfcmv.2013.12007
-
S. Iio, S. Oike, M. Yamazaki, K. Kimoto, Y. Katayama, T. Ikeda, 2012. Study on a Waterfall type hydraulic turbine: Investigation of a flow direction control method by using a curved channel. Turbo machinery, vol. 40, no. 12, pp.745-753.
-
Y. Katayama, S. Iio, T. Ikeda, 2012. Influence of a shield plate on performance of a hydraulic turbine with flow visualization. Turbo machinery, vol. 40, no. 10, pp.630-637.
-
S. Iio, Y. Katayama, F. Uchiyama, E. Sato, T. Ikeda, 2011. Influence of setting condition on characteristics of Savonius hydraulic turbine with a shield plate. Journal of Thermal Science, vol. 20, no. 3, pp.224-228. Available from:
http://dx.doi.org/10.1007/s11630-011-0462-9
-
S. Iio, K. Yanagisawa, C. Uchiyama, K. Teshima, N. Ezumi, T. Ikeda, 2011. Influence of gas flow on argon microwave plasma jet at atmospheric pressure. Surface and Coatings Technology, vol. 206, pp.1449-1453. Available from:
http://dx.doi.org/10.1016/j.surfcoat.2011.09.013
-
X. Li, S. Iio, K. Kawashima, T. Kagawa, 2011.Computational fluid dynamics study of a noncontact handling device using air-swirling flow. Journal of Engineering Mechanics-ASCE, vol. 137, no. 6, pp.400-409.
Available from:http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000237
-
S. Iio, M. Umebachi, X. Li, T. Kagawa, T. Ikeda, 2010. Performance of a non-contact handling device using swirling flow with various gap height. Journal of Visualization, vol. 13, pp.319-326.
Available from:http://dx.doi.org/10.1007/s12650-010-0045-y
Profile Details
http://soar-rd.shinshu-u.ac.jp/profile/en.HecNbpkh.html
Last Updated: 2014-1-31