[1]
|
H. C. Yuen and W. B. Lee, “Hot bonding Al Matrix Composite with Different Fraction of Alumina,” Material Science, Vol. 30, 1995, pp. 843-849.
doi:10.1007/BF01178415
|
[2]
|
H. C. Yuen, B. Ralph and W. B. Lee, “Novel Preparation for an Aluminum-Alumina MMC by a Hot Roll Bonding Process,” Scripta Metallurgica et Materialia, Vol. 29, 1993, pp. 695-670. doi:10.1016/0956-716X(93)90421-N
|
[3]
|
B. Ralph, H. C. Yuen and W. B. Lee, “The Processing of MMCs: An Overview,” Materials Processing Technology, Vol. 63, 1997, pp. 1-8.
doi:10.1016/S0924-0136(96)02645-3
|
[4]
|
Z. G. Wei, C. Y. Tang and W. B. Lee, “Design and Fabrication of Intelligent Composites Based on Shape,” Materials Processing Technology, Vol. 63, 1997, pp. 68-75.
doi:10.1016/S0924-0136(96)00041-6
|
[5]
|
Y. P. Rao and W. B. Lee, “Processing a Particulate MMC by Roll Bonding Method, Discussion Meeting on Inorganic Matrix Composites,” Indian Institute of Science, Bangalore, India, No. 3, 1995, pp. 8-18.
|
[6]
|
K. Yeow, “Transaction Behavior of Unidirectional Ribbon Reinforced Metal Glass Epoxy Laminates,” Composite Materials, Vol. 14, 1980, pp. 132-139.
doi:10.1177/002199838001400110
|
[7]
|
B. D. Agarwal and J. M. Lifshitz, “Elastic-Plastic Finite Element Analysis of Short Fiber Composites,” Fiber Science and Technology, Vol. 7, 1974, pp. 45-53.
doi:10.1016/0015-0568(74)90005-0
|
[8]
|
T. G. Neigh and D. J. Chellman, “Modulus Measurements in Discontinuous Reinforced Al Composites,” Scripta Metallurgica, Vol. 18, 1984, pp. 925-931.
doi:10.1016/0036-9748(84)90262-X
|
[9]
|
A. P. Divecha, S. G. Fishman and S. D. Karmarkar, “Silicon Carbide Reinforced Al: A Formable Composite,” Journal of Metals, Vol. 12, 1981, pp. 12-17.
|
[10]
|
D. L. McDaniels, “Analysis of Stress-Strain, Fracture and Ductility Behavior of Al MMCs Containing Discontinuous Silicon Carbide Reinforcement,” Metallurgical Transactions A, Vol. 16A, 1985, pp. 1105-1113.
doi:10.1007/BF02811679
|
[11]
|
D. R. Williams and M. E. Fine, “Quantitative Determination of Fatigue Microcrack Growth in SiC Whisker Reinforced 2124 Al Alloy Composites,” Proceedings of ICCM-V, San Diego, CA, AIME, TMS, Vol. 29, 1958, pp. 639-645.
|
[12]
|
J. Hemanth, “Cryo Effect during Solidification on the Tribological Behavior of Al-Alloy/Glass (SiO2) MMCs,” Journal of Composite Materials, Sage publications, Vol. 43, 2009, pp. 675-688.
|
[13]
|
J. Hemanth, “Tribological Behavior of Cryogenically Treated Al-12%Si Alloy/B4C Composites,” Wear, Elsevier Science, Vol. 258, 2005, pp. 1732-1745.
doi:10.1016/j.wear.2004.12.009
|
[14]
|
J. Hemanth, “Cryogenic Effects during Solidification on the Wear Behavior of Al Alloy/Glass MMCs,” Journal of Composite Materials Part A, Vol. 38, 2007, pp. 1395- 1402.
|
[15]
|
J. Hemanth, “Development and Property Evaluation of Al-Alloy Reinforced with Nano-ZrO2 Metal Matrix Composites (NMMCs),” Journal of Materials Science and Engineering A, Vol. 507, 2009, pp. 110-113.
doi:10.1016/j.msea.2008.11.039
|
[16]
|
R. G. Schierding and O. D. Deex, “Factors Influencing the Properties of Whisker-Metal Composites,” Composite Materials, Vol. 3, 1969, pp. 618-625.
|
[17]
|
T. T. Long, T. Nishimura and T. Aisaka, “Mechanical Properties and Wear Resistance of 6061 Al Alloy Reinforced with Hybrid Fibers and Whiskers,” Transactions of Japan Institute of Metals, Vol. 29, 1988, pp. 920-928.
|
[18]
|
R. J. Arsenault, “The Strengthening of Al Alloy 6061 by Fiber and Platelet SiC,” Materials Science and Engineering, Vol. 64, 1984, pp. 171-178.
doi:10.1016/0025-5416(84)90101-0
|
[19]
|
S. V. Nair, J. K. Tien and R. C. Bates, “SiC Reinforced Al MMCs” Institute of Metals, Vol. 30, 1985, pp. 275- 283.
|
[20]
|
J. Hemanth, “Quartz (SiO2p) Reinforced Chilled Metal Matrix Composites (CMMCs) for Automotive Applications,” Materials and Design, Elsevier Science, Vol. 30, 2009, pp. 323-329.
|
[21]
|
J. Hemanth, “Development and Property Evaluation of Al-Alloy Reinforced with Nano-ZrO2 Metal Matrix Composites for Automotive Applications,” SAE International world congress, Paper No. 2009-01-0218, Detroit, Michigan, USA, 2009.
|
[22]
|
A. Razaghian, D. Yu and T. Chandra, “Fracture Behavior of a SiC Particle Reinforced Al Alloy at High Temperature,” Composites Science and Technology, Vol. 58, 1998, pp. 293-298. doi:10.1016/S0266-3538(97)00130-9
|
[23]
|
S. Q. Wu, H. Z. Wang and S. C. Tjong, “Wear Behavior Al Based Composites Reinforced with Ceramic Particles,” Composites Science and Technology, Vol. 56, 1996,
|
[24]
|
pp. 1261-1268. doi:10.1016/S0266-3538(96)00085-1
|
[25]
|
S. C. Tjong, S. Q. Wu and H. C. Liao, “Wear Behavior of Al-12%Si Alloy Reinforced with a Low Volume of SiC Particles,” Composites Science and Technology, Vol. 57, 1997, pp. 1151-1158
|
[26]
|
C. M. Friend, “The Effect of Alumina Fiber Array on the Age Hardening Characteristics of and Al/Mg/Si Alloy,” Materials Science, Vol. 22, 1987, pp. 3005-3012.
doi:10.1007/BF01086505
|
[27]
|
J. M. Thompson, “A Proposal for the Wear Calculation,” Department of Mechanical engineering, MIT, 2007, pp. 45-57.
|
[28]
|
P. Podra and S. Anderson, “Simulating Sliding Wear with Finite Element Method,” Tribology International, Vol. 32, 1999, pp. 71-81. doi:10.1016/S0301-679X(99)00012-2
|
[29]
|
G. E. Lee, C. K. H. Dharan and R. O. Ritchie, “A physically Based Abrasive Wear Model for Composite Materials,” Wear, Vol. 252, 2002, pp. 322-331.
doi:10.1016/S0043-1648(01)00896-1
|
[30]
|
K. Elleuch and S. Fouvry, “Experimental and Modeling Aspects of Abrasive Wear of a A357 Aluminum Alloy under Gross Slip Fretting Conditions,” Wear, Vol. 258, 2005, pp. 40-49. doi:10.1016/j.wear.2004.04.010
|
[31]
|
J. Hemanth, “Wear Characteristics of Sub Zero Chilled Cast Iron,” Wear, Vol. 192, 1996, pp. 134-143.
doi:10.1016/0043-1648(95)06781-7
|
[32]
|
J. Hemanth, “Effect of Cooling Rate on the Dendrite Arm Spacing and Ultimate Tensile Strength of Cast Iron,” Material Science, Vol. 33, 1998, pp. 23-35.
doi:10.1023/A:1004321007806
|
[33]
|
J. Hemanth, “Effect of High Rate of Heat Transfer during Solidification of Alloyed Cast Iron Using Water-Cooled and Sub-Zero Chills on Mechanical Behavior,” Materials and Design Vol. 24, 2003, pp. 37-45.
doi:10.1016/S0261-3069(02)00086-9
|
[34]
|
J. F. Archard and W. Hirst, “The Wear of Metals under Un-Lubricated Conditions,” Proceedings of the Royal Society-A, Mathematical, Physical and Engineering Sciences, Vol. 236, 1956, pp. 397-410.
doi:10.1098/rspa.1956.0144
|
[35]
|
J. J. Lewandowski, C. Liu and W. H. Hunt, “Microstructure Effects on the Fracture Micro-Mechanisms in Al MMCs in Processing and Preparation for Powder Metallurgy Composites,” P. Kumar and A. Ritter, Eds., TMS, Vol. 12, 1988, pp. 117-128.
|
[36]
|
M. Taya and R. J. Arsenault, “Heat Treating of Composite Materials,” Composite materials, Pergamon press, Vol. 35, 1989, pp. 56-67.
|
[37]
|
B. Ralph, H. C. Yuen and W. B. Lee, “Mechanical Properties and Microstructure of Composite Materials,” Materials Processing Technology, Vol.63, 1997, pp. 9-18.
|
[38]
|
V. G. Gorbounov and V. D. Parshin, “Sliding Wear Characteristics of Al/SiO2 Composites,” Russian Casting Production, Vol. 35, 1974, pp. 348-356
|
[39]
|
T. G. Neigh, “Wear Regimes and Transition in Al2O3 MMCs,” Metallurgical and Materials Transactions, Vol. 15, 1984, pp. 139-146.
|
[40]
|
P. K. Ghosh and S. K. Ray, Wear Behavior of Al-12%Si Alloy Reinforced with Low Volume Fraction of SiO2 Particles,” Materials Science, Vol. 21, 1986, pp. 1167- 1175.
|
[41]
|
E. Rabinowicz, “Friction Wear of Materials,” John Wiley and Sons, New York, Vol. 32, 1965, pp. 168-177.
|
[42]
|
J. F. Archard, “Properties of Composite Materials” Journal of Applied Physics, Vol. 24, 1953, pp. 981-988.
doi:10.1063/1.1721448
|
[43]
|
A. G. Wang and I. M. Hutchings, “Wear of Alumina-Fiber Aluminum Composites,” Materials Science and Technology, Vol. 5, 1989, pp. 71-84.
|