Functional Acrylic Polymer as Corrosion Inhibitor of Carbon Steel in Autoclaved Air-Foamed Sodium Silicate-Activated Calcium Aluminate/Class F Fly Ash Cement

Abstract

The study focused on investigating the effectiveness of functional acrylic polymer (AP) in improving the ability of airfoamed sodium silicate-activated calcium aluminate/Class F fly ash cement (slurry density of 1.3 g/cm3) to mitigate the corrosion of carbon steel (CS) after exposure to hydrothermal environment at 200?C or 300?C. Hydrothermally-initiated interactions between the AP and cement generated the formation of Ca-, Al-, or Na-complexed carboxylate derivatives that improved the AP’s hydrothermal stability. A porous microstructure comprising numerous defect-free, evenly distributed, discrete voids formed in the presence of this hydrothermally stable AP, resulting in the increase in compresive strength of cement. The foamed cement with advanced properties conferred by AP greatly protected the CS against brine-caused corrosion. Four major factors governed this protection by AP-incorporated foamed cements: 1) Reducing the extents of infiltration and transportation of corrosive electrolytes through the cement layer deposited on the underlying CS surface; 2) Inhibiting the cathodic reactions at the corrosion site of CS; 3) Extending the coverage of CS by the cement; and 4) Improving the adherence of the cement to CS surface.

Share and Cite:

Sugama, T. and Pyatina, T. (2013) Functional Acrylic Polymer as Corrosion Inhibitor of Carbon Steel in Autoclaved Air-Foamed Sodium Silicate-Activated Calcium Aluminate/Class F Fly Ash Cement. Engineering, 5, 887-901. doi: 10.4236/eng.2013.511109.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] S. Gill, T. Pyatina and T. Sugama, “Thermal Shock-Resistant Cement,” Geothermal Resources Council Transaction, Vol. 36, 2012, pp. 445-451.
[2] T. Sugama L. E. Brothers and T. R. Van de Putte, “Air-Foamed Calcium Aluminate Phosphate Cement for Geothermal Wells,” Cement and Concrete Composite, Vol. 27, No. 7-8, 2005, pp. 758-768.
http://dx.doi.org/10.1016/j.cemconcomp.2004.11.003
[3] K. Y. Ann, H. S. Jung, H. S. Kim, S. S. Kim and H. Y. Moon, “Effect of Calcium Nitrite-Based Corrosion Inhibitor in Preventing Corrosion of Embedded Steel in Concrete,” Cement and Concrete Research, Vol. 36, No. 3, 2006, pp. 530-535.
http://dx.doi.org/10.1016/j.cemconres.2005.09.003
[4] M. Saremi and E. Mahallati, “A Study on Chloride-Induced Depassivation of Mild Steel in Simulated Concrete Pore Solution,” Cement and Concrete Research, Vol. 32, No. 12, 2002, pp. 1915-1921.
http://dx.doi.org/10.1016/S0008-8846(02)00895-5
[5] P. Ghods, O. B. Isgor, G. A. McRae and G. P. Gu, “Electrochemical Investigation of Chloride-Induced Depassivation of Black Steel Rebar under Simulated Service Conditions,” Corrosion Science, Vol. 52, 2010, pp. 16491659. http://dx.doi.org/10.1016/j.corsci.2010.02.016
[6] Y. M. Tang, Y. F. Miao, Y. Zuo, G. D. Zhang and C. L. Wang, “Corrosion Behavior of Steel in Simulated Concrete Pore Solutions Treated with Calcium Silicate Hydrates,” Construction and Building Materials, Vol. 30, 2012, pp. 252-256.
http://dx.doi.org/10.1016/j.conbuildmat.2011.11.033
[7] A. R. Boga and I. B. Topcu, “Influence of Fly Ash on Corrosion Resistance and Chloride Ion Permeability of Concrete,” Construction and Building Materials, Vol. 31, 2012, pp. 258-264.
http://dx.doi.org/10.1016/j.conbuildmat.2011.12.106
[8] J. Hu, D. A. Koleva and K. van Breugel, “Corrosion Performance of Reinforced Mortar in the Presence of Polymeric Nano-Aggregates: Electrochemical Behavior, Surface Analysis, and Properties of the Steel/Cement Past Interface,” Journal of Material Science, Vol. 47, 2012, pp. 4981-4995. http://dx.doi.org/10.1007/s10853-012-6374-6
[9] S. X. Wang, W. W. Lin, S. A. Ceng and J. Q. Zhang, “Corrosion Inhibition of Reinforcing Steel by Using Acrylic Latex,” Cement and Concrete Research, Vol. 28, 1998, pp. 649-653.
http://dx.doi.org/10.1016/S0008-8846(98)00048-9
[10] R. Selvaraj, M. Selvaraj and S. V. K. Iyer, “Studies on the Evaluation of the Performance of Organic Coatings Used for the Prevention of Corrosion of Steel Rebars in Concrete Structure,” Progress in Organic Coatings, Vol. 64, No. 4, 2009, pp. 454-459.
http://dx.doi.org/10.1016/j.porgcoat.2008.08.005
[11] T. Sugama, “Hydrothermally Self-Advancing Hybrid Coatings for Mitigating Corrosion of Carbon Steel,” Brookhaven National Laboratory, 2006, BNL-77335.
[12] P. R. Sere, A. R. Armas, C. I. Elsner and A. R. Di Sarli, “The Surface Condition Effect on Adhesion and Corrosion Resistance of Carbon Steel/Chlorinated Rubber/Artificial Sea Water Systems,” Corrosion Science, Vol. 38, 1996, pp. 853-866.
http://dx.doi.org/10.1016/0010-938X(96)00171-0
[13] M. Stern and A. L. Geary, “Electrochemical Polarization I. A Theoretical Analysis of the Shape of Polarization Curves,” Journal of Electrochemical Society, Vol. 104, No. 1, 1975, pp. 56-62.
http://dx.doi.org/10.1149/1.2428496

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.