[1]
|
S. Kumar, S. V. Desai, M. R. Kulkarni and D. P. Chakra-varthy, “Development of Electro-Magnetic Welding Technique for Similar and Dissimilar Metal Strips,” Na-tional Welding Seminar-2008, Mumbai.
|
[2]
|
S. Kumar, S. V. Desai, M. R. Kulkarni and D. P. Chakra-varthy, “Electro-Magnetic Welding of Copper to Stainless Steel,” National Welding Seminar-2009, Kolkata.
|
[3]
|
S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “On the Parameters of the Magnetic Forming Process,” Journal of Mechanical Engineering Science, Vol. 16, No. 1, pp.1-9.
|
[4]
|
S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “The Influence of the Electrical and Geometrical Parameters in Magnetic Forming,” Proceedings of the 8th International MTDR conference, Manchester, UK, September 1967.
|
[5]
|
K. Baines, J. L. Duncan and W. Johnson, “Electromagnetic Metal Forming,” Proceedings I. Mech. E, 180 (Pt. 1) 1965-6 4, 93.
|
[6]
|
S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “Analysis of the Electromagnetic Forming Process,” Pro-ceedings of C.I.R.P., ASTME conference U.S.A., Sept. 1967.
|
[7]
|
G. K. Lal and M. J. Hillier, “The Electrodynamics of Electromagnetic Forming,” International Journal of Me-chanical Science, Vol. 10, No. 6, 1968, pp. 491-500.
|
[8]
|
G. K. Lal, “Electromagnetic Metal Forming,” IEEE transactions on Industrial applications, 1972, pp. 425-429.
|
[9]
|
K. Feas, T. Baaten, W. D. Waele and N. Debroux, “Join-ing of Copper to Brass Using Magnetic Pulse Welding,” 4th International conference on high speed forming, 2010, pp. 84-96.
|
[10]
|
V. Shribman, A. Stern, V. Livshitz and O. Gafri, “Mag-netic Pulse Welding Produces High Strength Aluminium Welds,” Welding Journal 81, 2002, pp 33-37.
|
[11]
|
B. Artzy, A. Stern, N. Frage and V. Shribman, “Interface Phenomena in Aluminium-Magnesium Magnetic Pulse Welding,” Science and technology of welding and joining, Vol. 13, No. 4, 2008, pp. 402-408.
|
[12]
|
S. V. Desai, S. Kumar, P. Satyamurthy, J. K. Chakravartty and D. P. Chakravarthy, “Analysis of the Effect of Colli-sion Velocity in Electromagnetic Welding Process of Aliminum Strips,” accepted for publication in International Journal of Electromagnetics and Mechanics in May 2010.
|
[13]
|
T. Aizawa, K. Okagawa, M. Yoshizawa and N. Henmi, “Impulse Magnetic Pressure Seam Welding of Aluminium Sheets,” Impact engineering and applications, 2001, pp. 827-832.
|
[14]
|
S. V. Desai, S. Kumar, P. Satyamurthy, J. K. Chakravartty and D. P. Chakravarthy, “Improvement of Performance of Electromagnetic Welding Process by Use of Driver Mate-rials,” accepted for publication in International Journal of Electromagnetics and Mechanics in 2010.
|
[15]
|
W. F. Brown, J. Bandas and N. T. Olsan, “Pulsed Mag-netic Welding of Fast Breeder Reactor Fuel Pin End Clo-sures,” Welding journal, Vol. 57, No. 6, 1978, pp. 22-26.
|