[1]
|
A. D. Dance and R. D. Morrison, “Quantifying a Black Art: The Electrostatic Separation of Mineral Sands,” Min- erals Engineering, Vol. 5, No. 7, 1992, pp.751-765.
doi:10.1016/0892-6875(92)90244-4
|
[2]
|
J. Elder and E. Yan, “Newest Generation of Electrostatic Separator for the Minerals Sands Industry,” Heavy Min- erals 2003, South African Institute of Mining and Metal- lurgy, Johannesburg, pp. 63-70.
|
[3]
|
M. Ziemski and P. N. Holtham, “Particle Bed Charge Decay Behaviour under High Tension Roll Separation,” Minerals Engineering, Vol. 18, No. 15, 2005, pp. 5-14.
doi:10.1016/j.mineng.2005.02.013
|
[4]
|
J. M. Lottering and C. Aldrich, “Online Measurement of Factors Influencing the Electrostatic Separation of Min- eral Sands,” The Journal of the South African Institute of Mining and Metallurgy, Vol. 106, 2006, pp. 283- 290.
|
[5]
|
E. G. Kelly and D. J. Spottiswood, “The Theory of Elec- trostatic Separations: A Review Part 1. Fundamentals,” Minerals Engineering, Vol. 2, No. 1, 1989, pp. 33-46.
doi:10.1016/0892-6875(89)90063-0
|
[6]
|
N. Aslan, “Application of Response Surface Methodol- ogy and Central Composite Rotatable Design for Model- ing the Influence of Some Operating Variables of a Multi- Gravity Separator for Coal Cleaning,” Fuel, Vol. 86, No. 5-6, 2007, pp.769-776. doi:10.1016/j.fuel.2006.10.020
|
[7]
|
N. Aslan and Y. Cebeci, “Application of Box-Behnken Design and Response Surface Methodology for Modeling of Some Turkish Coals,” Fuel, Vol. 86, No. 1-2, 2007, pp. 90-97. doi:10.1016/j.fuel.2006.06.010
|
[8]
|
N. Aslan, “Modeling and Optimization of Multi Gravity Separator to Produce Celestite Concentrate,” Powder Technology, Vol. 174, No. 3, 2007, pp. 127-133.
doi:10.1016/j.powtec.2007.01.007
|
[9]
|
M. Kincl, S. Turk and F. Vrecer, “Application of Experi- mental Design Methodology in Development and Opti- mization of Drug Release Method,” International Journal of Pharmaceutics, Vol. 291, No. 1-2, 2005, pp. 39-49.
doi:10.1016/j.ijpharm.2004.07.041
|
[10]
|
Z. Xiao and A. Vien, “Experimental Designs for Precise Parameter Estimation for Non-Linear Models,” Minerals Engineering, Vol. 17, No. 3, 2004, pp. 431-436.
doi:10.1016/j.mineng.2003.11.018
|
[11]
|
G. E. P. Box and D. W. Benhken, “Some New Three Level Designs for the Study of Quantitative Variables,” Technometrics, Vol. 2, 1960, pp. 455-475.
|
[12]
|
C. D. Montgomery, “Design and Analysis of Experi- ments,” John Wiley and Sons, Pte. Ltd, Singapore, 2001.
|
[13]
|
S. L. C. Ferreira, W. N. L. Santos, C. M. Quintella, B. B. Neto and J. M. Boque-Sendra, “Doehlert Matrix: A Che- mometric Toll for Analytical Chemistry Review,” Ta- lanta, Vol. 63, No. 4, 2004, pp. 1061-1067.
doi:10.1016/j.talanta.2004.01.015
|
[14]
|
S. Souza Anderson, N. L. dos Santos Walter and L. C. Ferreira Sergio, “Application of Box-Behnken Design in the Optimization of an On-Line Pre-Concentration Sys- tem Using Knotted Reactor for Cadmium Determination by Flame Atomic Absorption Spectrometry,” Spectro- chimica Acta Part B, Vol. 60, No. 5, 2005, pp. 737-742.
doi:10.1016/j.sab.2005.02.007
|
[15]
|
D. L. Massart, B. G. M Vandeginste, L. M. C. Buydens, S. D. Jong, P. J. Lewi and J. V. Smeyers, “Handbook of Chemometrics and Qualimetrics Part A,” Elsevier, Am- sterdam, 2003.
|
[16]
|
N. Kannan, A. Rajakumar and G. Rengasamy, “Optimi- zation of Process Parameters for Adsorption of Metal Ions on Straw Carbon by Using Response Surface Meth- odology,” Environmental Technology, Vol. 25, No. 5, 2004, pp. 513-522.
|
[17]
|
P. Rana, N. Mohan and C. Rajagopal, “Electrochemical Removal of Chromium from Wastewater by Using Carbon Aerogel Electrodes,” Water Research, Vol. 38, No. 12, 2004, pp. 2811-2820.
doi:10.1016/j.watres.2004.02.029
|
[18]
|
G. Annadurai, S. S. Sung and D. L. Lee, “Optimization of Floc Characteristics for Treatment of Highly Turbid Wa- ter,” Separation Science and Technology, Vol. 39, No. 1, 2005, pp. 19-42. doi:10.1081/SS-120027399
|
[19]
|
C. Nilkuha, “The Examination of Some Aspects of High Tension Separation of Minerals,” MEngSc Thesis, Uni- versity of Melbourne, Melbourne, 1959.
|
[20]
|
D. M. Hopstock, “An Analysis of a Rotating-Drum-Type Electrostatic Separator,” Ph.D. Thesis, University of Min- nesota, Minnesota, 1972.
|
[21]
|
R. D. Morrison, “Mathematical Modeling of High Ten- sion Roll Separation,” Ph.D. Thesis, University of Queen- sland, Queensland, 1977.
|
[22]
|
J. S. Kwak, “Application of Taguchi and Response Surface Methodologies for Geometric Error in Surface Grinding Process,” International Journal of Machine Tools and Manufacture, Vol. 45, No. 3, 2005, pp. 327- 334. doi:10.1016/j.ijmachtools.2004.08.007
|
[23]
|
V. Gunaraj and N. Murugan, “Application of Response Surface Methodologies for Predicting Weld Base Quality in Submerged Arc Welding of Pipes, Journal of Materials Processing Technology, Vol. 88, No. 1-3, 1999, pp. 266- 275. doi:10.1016/S0924-0136(98)00405-1
|
[24]
|
C. R. Kumar, S. Tripathy and D. S.Rao, “Characterization and Pre-Concentration of Chromite Values from Plant Tailings Using Floatex Density Separator, Journal of Minerals and Materials Characterization and Engineer- ing, Vol. 8, No. 5, 2009, pp. 367-378
|