[1]
|
J.P. Wise, J. Spice, S.G. Davidson, W.E. Heitmann and G. Krauss, “Influence of short
austenizing times on the fracture behavior of a micro alloyed automotive spring steel” , scripta mater, Vol 44, Year 2001, Pp 299-304.
|
[2]
|
C.S. Lee, K.A. Lee, D.M. Li, S.J. Yoo , W.J. Nam, “Microstructural influence on fatigue properties of a high-strength spring steel” ,material science and engineering , Vol A241, Year 1998, Pp 30-37.
|
[3]
|
Sinan Fank Tubitak, Ulusal Metroloji Enstitusu, Gebze, Kocaeli, “Different heat
treatment processes can be applied on the spring element of a force transducer in order to obtain good and satisfactory performance”.
|
[4]
|
A. Ardehali Barani, D. Ponge, D. Raabe, “Refinement of grain boundary carbides in a Si–Cr spring steel by thermo mechanical treatment”, Materials Science and Engineering, Vol A 426, Year2006, Pp 194–201.
|
[5]
|
D. Das, A.K. Dutta, K.K. Ray, “Influence of varied cryotreatment on the wear behavior of AISI D2 steel”, wear, Vol 266, Year 2009, Pp 297-309.
|
[6]
|
Paolo Baldissera, Cristiana Delprete, “Effects of deep cryogenic treatment on static
mechanical properties of 18NiCrMo5 carburized steel”, Materials & Design, Volume 30, Issue 5, May 2009, Pages 1435-1440.
|
[7]
|
R. Jones, L. Molent, S. Pitt, “Crack growth of physically small cracks”, Engineering,
Monash International Journal of Fatigue, Vol 29, Year 2007, Pp 1658–1667
|
[8]
|
B. Ravi Kumar, D.K. Bhattacharya, Swapan K. Das, Sandip Ghosh Chowdhury,
“Premature fatigue failure of a spring due to quench cracks” ,engineering failure analysis , Vol 7, Year 2000 ,Pp 377-384.
|
[9]
|
Won Jong Nam, Chong Soo Lee , Deok Young Ban , “Effects of alloy additions and
tempering temperature on the sag resistance of Si–Cr spring steels”, Materials Science
and Engineering, Vol A289, Year2000, Pp 8–17.
|
[10]
|
M. Molnarova, I. mamuzi , J. Bacso, , M. Fujda, P. Kodronova, T. Kuskuli, I. Pokorny, “Influence of reheating and cooling conditions on structure and mechanical properties of c-mn-si steel”, Metalurgija, Vol 47 , Year 2008, Pp 187-190.
|
[11]
|
Masami Wakita and Takanori Kuno and Ayamitsu Amano, Akihiko Nemoto and
Katsushi Saruki and Keisuke Tanaka ,“Study on Predicting Formula for Torsional
Fatigue Strength of Spring Steel- Effect of Environment, Notch and Hardness”
|
[12]
|
Y. Sahin, “Optimal testing parameters on the wear behavior of various steels”, Materials and design, Vol 27, Year 2006, Pp 455-460.
|
[13]
|
Yoshifumi Amamoto, Hozumi Goto “Friction and wear of carbon steel near T1-transition under dry sliding”, Tribology International, Vol39, Year 2006, Pp 756–762.
|
[14]
|
Y. Totik, R. Sadeler, H. Altun, M. Gavgali, “The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions”, Materials & Design, Volume 24, Issue 1, February 2003, Pages 25-30.
|
[15]
|
Mare Meyers and Krishan chawla, “Mechanical behavior of materials (Second edition)”
|
[16]
|
S. Basavarajappa, K.V. Arun, J. Paulo Davim, “Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach”, Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No.5, Pp 379-391, 2009
|
[17]
|
Ross, P.J. Taguchi Techniques for Quality Engineering, McGraw–Hill Publishing
Company Ltd.: New York, 1988.
|
[18]
|
N.E.W. Hartley, J.K. Hirvonen ,”Wear testing under high load conditions, The effect of “anti-scuff” additions to AISI 3135, 52100 and 9310 steels introduced by ion
implantation and ion beam mixing”, Nuclear Instruments and Methods, Vol 209/210,
Year 1983, Pp 933-940.
|