[1]
|
Inoue, A., Zhang, T., Nishiyama, N., Ohba, K., and Matsuda, T., 1993,“Preparation of 16mm Diameter Rod of Amorphous Zr65Al7.5Ni10Cu17.5 Alloy”. Materials Transactions JIM. Vol. 34, No.12, pp.1234-1237.
|
[2]
|
Inoue, A., and Zhang, T., 1996, “Fabrication of Bulk Glass Zr55Al10Ni5Cu30
Alloy of 30mm in Diameter by Suction Casting Method”. Materials Transactions JIM.
Vol. 37, No.2, pp.185-187.
|
[3]
|
Peker, A., and Johnson, W. L., 1993, “A Highly Processable Metallic Glass: Zr41.25Ti13.75Ni10Cu12.5Be22.5”. Applied Physics Letters. Vol. 63, No. 17, pp.2342-2344.
|
[4]
|
Choi-Yim, H., Conner, R. D, Szuecs, F., and Johnson, W. L., 2001, “Quasistatic
and Dynamic Deformation of Tungsten Reinforced Zr57Al10Nb5Cu15.4Ni12.6 Bulk Metallic Glass Matrix Composites”. Scripta Materialia. Vol.45, pp.1039-1045.
|
[5]
|
Gilbert, C. J., Schroeder, V., and Ritchie, R. O., 1999, “Mechanisms for Fracture and Fatigue-Crack Propagation in a Bulk Metallic Glass”. Metallurgical & Materials Transactions A: Vol. 30, pp.1739-1754.
|
[6]
|
Pang, S. J., Zhang, T., Kimura, H., Asami, K., and Inoue, A., 2000, “Corrosion
Behavior of Zr-(Nb-)Al-Ni-Cu Glass Alloys”. Materials Transactions JIM. Vol. 41, No.
11, pp.1495-1500.
|
[7]
|
Dandliker, R. B., Conner, R. D., and Johnson, W. L., 1998, “Melt Infiltration
Casting of Bulk Metallis-Glass Matrix Composites”. Journal of Materials Research. Vol.
13, No. 10, pp.2896-2901.
|
[8]
|
Choi-Yim, H., Conner, R. D., and Johnson, W. L., 2002, “Processing, Microstructure and Properties of Ductile Metal Particulate Reinforced Zr57Al10Nb5Cu15.4Ni12.6 Bulk Metallic Glass Composites”. Acta Materialia. Vol. 50, No.10, pp.2737-2745.
|
[9]
|
Hufnagel, T. C., Fan, C., Ott R, T., Li, J., and Brennah, S., 2002, “Controlling Shear Band Behavior in Metallic Glasses Through Microstructure Design”. Intermetallics. Vol. 10, pp.1163-1166.
|
[10]
|
Conner, R. D., Dandliker, R. B., and Johnson, W. L., 1998, “Mechanical Properties of Tungsten and Steel Fiber Reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 Metallic Glass Matrix Composites”. Acta Materialia. Vol. 46, No.17. pp.6089-6102.
|
[11]
|
Hirano, T., Kato, H., Matsuo, A., Kawamura, Y., and Inoue, A., 2000, “Synthesis and Mechanical Properties of Zr55Al10Ni5Cu30 Bulk Metallic Glass Composites Containing ZrC Particles Formed by the In-Situ Reaction”. Materials
Transactions JIM. Vol. 41, No.11, pp1454-1459.
|
[12]
|
Choi-Yim, H., Busch, R., and Johnson, W. L., 1998, “The Effect of Silicon on the Glass Forming Ability of the Cu47Ti34Zr11Ni8 Bulk Metallic Alloy During Processing of Composites”. Journal of Applied Physics. Vol. 83, No. 12, pp.7993-7997
|
[13]
|
Johnson, W. L., 1999, “Bulk Glass-Forming Metallic Alloys: Science and Technology”. MRS BULLETIN. Vol. 10, pp.42-56
|
[14]
|
Qiu, K.Q., Wang, A.M., Zhang, H.F., Ding, B.Z., and Hu, Z.Q., 2002, “Melt
Infiltration casting of Zr55Al10Ni5Cu30 bulk metallic glass Matrix Composite”. Chinese Journal of materials research. Vol.16, No. 4, pp.389-394.
|
[15]
|
Qiu, K.Q., 2002, “The Glass-Forming Ability, Composites and Properties of
Bulk metallic Glasses”. Ph.D Dissertation, Institute of Metal Research, Chinese
Academy of Sciences. pp.101-105.
|
[16]
|
Lin, X. H., Johnson, W. L., and Rhim, W. K., 1997, “Effect of Oxygen
Impurity on Crystallization of an Undercooled Bulk Glass Forming Zr-Ti-Cu-Ni-Al Alloy”. Materials Transactions JIM, Vol.38, No.5, pp.473-477.
|