[1]
|
Abbruzzese G., 1985, “Computer simulated grain growth stagnation.” Acta Metall., Vol. 33, pp. 1329–1337.
|
[2]
|
Dieter, G.E., 1986, Mechanical Metallurgy, 3rd ed., McGraw-Hill Series in Materials Science and Engineering, McGraw-Hill, Boston, MA.
|
[3]
|
Porter, D.A. and Easterling, K. E., 1992, Phase Transformations in Metals and Alloys, 2nd ed., CRC press, Boca Raton, FL.
|
[4]
|
Payton, E.J., 2009, Characterization and Modeling of Grain Coarsening in Powder Metallurgical Nickel-based Superalloys, Ph.D. thesis, The Ohio State University, Columbus, OH.
|
[5]
|
Wang, G., Xu, D.S., Payton, E.J., Ma, N., Yang, R., Mills, M.J., and Wang, Y., 2011, “Mean-field statistical simulation of grain coarsening in the presence of stable and unstable pinning particles.” Acta Mater., Vol. 59, pp. 4587-4594.
|
[6]
|
Kahn, H., Mano, E.S., and Tassinari, M.M., 2002, “Image analysis coupled with a SEM-EDS applied to the characterization of a Zn-Pb partially weathered ore.” J. Miner. Mater. Charact. Eng., Vol. 1, pp. 1-9.
|
[7]
|
Gu, Y., 2003, “Automated scanning electron microscope based mineral liberation analysis: An introduction to JKMRC/FEI mineral liberation analyzer.” J. Miner. Mater. Charact. Eng., Vol. 2, pp. 33-41.
|
[8]
|
Hagni, A.M., 2008, “Phase identification, phase quantification, and phase association determinations utilizing automated mineralogy technology.” JOM, Vol. 60, pp. 33-37.
|
[9]
|
Payton, E.J., Phillips, P.J., and Mills, M.J., 2010, “Semi-automated characterization of the gamma prime phase in Ni-based superalloys via high-resolution backscatter imaging.” Mater. Sci. Eng. A, Vol. 527, pp. 2684–2692.
|
[10]
|
Schouwstra, R.P. and Smit, A.J., 2011, “Developments in mineralogical techniques – What about mineralogists?” Miner. Eng., Vol. 24, pp. 1224-1228.
|
[11]
|
Payton, E.J., Wang, G., Wang, G., Ma, N., Wang, Y., Mills, M.J., Whitis, D.D., Mourer, D.P., and Wei, D., 2008, “Integration of simulations and experiments for modeling superalloy grain growth,” in: Superalloys 2008, pp. 975-985, The Minerals, Metals & Materials Society, Warrendale, PA.
|
[12]
|
Wang, G., Xu, D.S., Ma, N., Zhou, N., Payton, E.J., Yang, R., Mills, M.J., and Wang, Y., 2009, “Simulation study of effects of initial particle size distribution on dissolution.” Acta Mater., Vol. 57, pp. 316-325.
|
[13]
|
Hilliard, J.E. and Cahn, J.W., 1961, “An evaluation of procedures in quantitative metallography for volume-fraction analysis.” Trans. AIME, Vol. 221, pp. 344-352.
|
[14]
|
Underwood, E.E., 1968, “Particle-size Distribution,” in: Quantitative Microscopy, pp. 149–200, McGraw-Hill Book Company, New York, NY.
|
[15]
|
Underwood, E.E., 1970, Quantitative Stereology, 2nd ed., Addison-Wesley Publishing Company, Reading, MA.
|
[16]
|
Cruz-Orive, L.M., 1976, “Particle size-shape distributions: the general spheroid problem.” J. Microsc., Vol. 107, pp. 235–253.
|
[17]
|
Cruz-Orive, L.M., 1978, “Particle size-shape distributions: the general spheroid problem: II. Stochastic model and practical guide.” J. Microsc., Vol. 112, pp. 153–167.
|
[18]
|
Cruz-Orive, L.M., 1983, “Distribution-free estimation of sphere size distributions from slabs showing overprojection and truncation, with a review of previous methods.” J. Microsc., Vol. 131, pp. 265–290.
|
[19]
|
Takahashi, J. and Suito, H., 2003, “Evaluation of the accuracy of the three-dimensional size distribution estimated from the Schwartz-Saltikov method.” Metall. Mater. Trans. A, Vol. 34, pp. 171-181.
|
[20]
|
Payton, E.J. and Mills, M. J., 2011, “Stereology of backscatter electron images of etched surfaces for characterization of particle size distributions and volume fractions: Estimation of imaging bias via Monte Carlo simulations.” Mater. Charact., Vol. 62, pp. 563-574.
|
[21]
|
Jeppsson, J., Mannesson, K., Borgenstam, A., and ?gren, J., 2011, “Inverse Saltikov analysis for particle-size distributions and their time evolution.” Acta Mater., Vol. 59, pp. 874-882.
|
[22]
|
Ohser, J. and Mücklich, F., 2000, Statistical analysis of microstructures in materials science, John Wiley & Sons, New York, NY.
|
[23]
|
Ohser, J. and Mucklich, F., 1995, “Stereology for some classes of polyhedrons.” Adv. Appl. Prob., Vol. 27, pp. 384-396.
|
[24]
|
Scott, D.W., 1979, “On optimal and data-based histograms.” Biometrika, Vol. 66, pp. 605-610.
|
[25]
|
Saltikov, S.A.: “The determination of the size distribution of particles in an opaque material from a measurement of the size distribution of their sections,” in: Stereology: Proceedings of the Second International Congress for Stereology, Chicago, 1967, pp. 163–173.
|
[26]
|
Heilbronner, R. and Bruhn D., 1998, “The influence of three-dimensional grain size distributions on the rheology of polyphase rocks.” J. Struct. Geol., Vol. 20, pp. 695–705.
|
[27]
|
Heilbronner, R., 2002, “How to derive size distributions of particles from size distributions of sectional areas,” Conférence Universitaire de Suisse Occidentale, 3ème Cycle Séminaire: “Analyse d’images et morphométrie d’objets géologiques,” Organisé à Neuchatel, Institut de Géologie, Université de Neuchatel.
|
[28]
|
Ford, W.B., 1922, A Brief Course in College Algebra, The Macmillan Company, New York, NY.
|
[29]
|
Limpert, E., Stahel, W.A., and Abbt, M., 2001, “Log-normal Distributions across the Sciences: Keys and Clues.” BioScience, Vol. 51, pp. 341-352.
|
[30]
|
Russ, J.C. and Dehoff, R.T., 2000, Practical Stereology, Kluwer Academic, New York, NY.
|