[1]
|
Y. A. Aggour, A. S. Al-Shihri and M. R. Bazzt, “Recycling of Vulcanized Waste Rubber through Halogenations and Amination Chemical Reactions,” WIT Transaction on Ecology & Environment WIT Press, Vol. 120, 2009, pp. 875-883.
|
[2]
|
K. I. Lee and S. H. Ryu, “Ultraviolet Photo Grafting Reaction of Acrylamide onto Styrene-Butadiene Rubber,” Elastomers, Vol. 33, No. 4, 1998, p. 363.
|
[3]
|
J. J. Yu and S. H. Ryu, “Ultraviolet-Initiated Photo Grafting of Glycidyl Methacrylate onto Styrene-Butadiene Rub- ber,” Journal of Applied Polymer Science, Vol. 73, No. 9, 1994, pp. 1733-1739.
doi:10.1002/(SICI)1097-4628(19990829)73:9<1733::AID-APP14>3.0.CO;2-J
|
[4]
|
F. Cataldo, O. Ursini and G. Angelini, “Surface Oxidation of Rubber Crumb with Ozone,” Polymer Degradation and Stability, Vol. 95, No. 5, 2010, pp. 803-810.
doi:10.1016/j.polymdegradstab.2010.02.003
|
[5]
|
S. L. Zheng, Z. X. Zheng, K. Pal, Z. X. Xin, J. Suh and J. K. Kim, “Prediction of Mechanical Properties of Waste Polypropylene/Waste Ground Tire Powder Blends Using Artificial Neutral Networks,” Material & Design, Vol. 31 No. 8, 2010, pp. 3624-3629.
doi:10.1016/j.matdes.2010.02.039
|
[6]
|
C. T. Torrado, M. A. Franco, C. F. Gonzalez, M. A. Domingues and V. G. Serrano, “Development of Adsor- bents from Used Tires Rubber, Their Uses in the Adsorption of Organic and Inorganic Solutes in Aqueous Solution,” Fuel Processing Technology, Vol. 92, No. 2, 2011, pp. 206-212.
|
[7]
|
C. Geismann and M. Ulbricht, “Photoreactive Functionalization of Poly(Ethylene Terphthalate) Trak-Etched Pore Surfaces with Smart Polymer Systems,” Macromolecular Chemistry and Physics, Vol. 206, No. 2, 2005, pp. 268- 281. doi:10.1002/macp.200400374
|
[8]
|
Y. A. Aggour, A. S. Al-Shihri and M. R. Bazzt, “Chemical Modification of Scraped Tires through Grafting with AMPS,” 2012, in press.
|
[9]
|
J. Cha and J. L. White, “Styrene Grafting onto a Polyolefin in an Internal Mixer and Twin-Screw Extruder,” Polymer Engineering Science, Vol. 41, No. 7, 2001, pp. 1238-1250. doi:10.1002/pen.10825
|
[10]
|
T. Rager, “Pre-Irradiation Grafting of Styrene/divinyl- benze onto PTFE Co-Hexafluropropylene from Non- Solvents” Helvetica Chemica Acta, Vol. 86, No. 6, 2003, pp. 1966-1981.
|
[11]
|
S. Coiai, E. Passaglia and F. Ciardell, “Gradient Density Grafted Polymers on Ground Tire Rubber Particles by Atom Transfer Radical Polymerization,” Macromolecular Chemistry and Physics, Vol. 207, No. 4, 2005, pp. 2289- 2298. doi:10.1002/macp.200600376
|
[12]
|
J. L. Zhang, X. H. Chen, C. M. Ke, Y. Zhou, H. Z. Lu and D. L. Wang, “Graft Polymerization of Styrene onto Waste Rubber Powder and Surface Characterization of Graft Copolymer,” Polymer Bulletin, Vol. 68, No. 3, 2012, pp. 789-801. doi:10.1007/s00289-011-0586-9
|
[13]
|
N. Pukkate, Y. Yamamoto and S. Kawahara, “Mechanism of Graft Copolymerization of Styrene onto Deproteinized Natural Rubber,” Colloid Polymer Science, Vol. 286, No. 4, 2008, pp. 441-416. doi:10.1007/s00396-007-1787-5
|
[14]
|
S. Newman, “Rubber Modification of Plastics,” In: D. R. Paul and S. Newman, Eds., Polymer Blend, Academic Press, New York, Vol. 2, 1978, p. 63
|
[15]
|
J. P. Deng, W. T. Yang and B. Ranby, “Melt-Photo- grafting Polymerization of Maleic Anhydride onto LDPE Film,” European Polymer Journal, Vol. 38, No. 7, 2002, pp. 1449-1455. doi:10.1016/S0014-3057(02)00004-6
|
[16]
|
J. P. Deng and W. T. Yang, “Surface Photo-Grafting Polymerization of Vinyl Acetate Malic Anhydride and Their Charge-Transfer Complex IV. MA,” Journal of Applied Polymer Science, Vol. 87, No. 14, 2003, pp. 2318-2325.
doi:10.1002/app.11734
|
[17]
|
E. Carone, U. Kipcak Jr, M. C. Goncalves and S. P. Nunes, “In Situ Compatibilization of Polyamide 6/Natural Rubber Blends with Maleic Anhydride,” Polymer, Vol. 41, No. 15, 2000, pp. 5929-5935.
doi:10.1016/S0032-3861(99)00800-9
|
[18]
|
C. Nakason, A. Kaesaman, Z. Samoh, S. Homsin and S. Kitkamjonwong, “Rheological Properties of Maleated Natural Rubber and Its Blends,” Polymer Testing, Vol. 21, No. 4, 2002, pp. 449-455.
doi:10.1016/S0142-9418(01)00109-X
|
[19]
|
C. Nakason, A. Kaesaman, S. Homsin and S. Kiatkamjonwong, “Rheological and Curing Behavior of Reactive Blending, Maleated Natural Rubber Cassava Starch,” Journal of Applied Polymer Science, Vol. 81, No. 11, 2001, pp. 2803-2813. doi:10.1002/app.1728
|
[20]
|
M. Saedan, T. Navarat and A. Sobmbat, “Grafting of Maleic Anhydride on Natural Rubber Molecules in a Molten State,” The National Research Council of Thailand, Bangkok, 1997.
|
[21]
|
C. Nakason, A. Kaesaman and P. Supasanthitikul, “The Grafting of Maleic Anhydride onto Natural Rubber,” Polymer Testing, Vol. 23, No. 1, 2004, pp. 35-41.
doi:10.1016/S0142-9418(03)00059-X
|
[22]
|
F. M. B. Coutinho and M. I. P. Ferreira, “Characterization of EPDM Rubber Modified with Maleic Anhydride by Diffuse Reflective FTIR,” Polymer Testing, Vo. 13, No. 1, 1994, pp. 25-34. doi:10.1016/0142-9418(94)90037-X
|
[23]
|
Y. A. Aggour, G. Bekhat and A. M. Atia, “Copolymerization and Thermal Investigation of AMPS with Acrylonitrile,” Journal of Polymer Materials, Vol. 17, No. , 2000, p. 193.
|
[24]
|
J. Deng and W. Yong, “Grafting Copolymerization of Styrene and Maleic Anhydride Binary Monomer System Induced by UV Irradiation,” European Polymer Journal, Vol. 41, No. 11, 2005, pp. 2658-2692.
doi:10.1016/j.eurpolymj.2005.05.022
|
[25]
|
Y. A. Aggour, “Modification of Polystyrene Properties through N-vinylcarboxamido-2-methylpropane Sulfonic Acid Monomer,” Polymer International, Vol. 53, No. 12, 2004, pp. 1930-1935. doi:10.1002/pi.999
|
[26]
|
Z. G. Shen, H.-M. Li, H.-B. Chen and S. G. Lin, “Preparation and Characterization of MA functionalized Syndiotactic Polystyrene,” Polymer, Vol. 43, No. 20, 2002, pp. 5455-5461.
|
[27]
|
L. J. Bellamy, “The Infrared Spectra of Complex Molecules,” Wiley, New York, 1964.
|
[28]
|
F. Chen and J. Quian, “Studies of the Thermal Degradation of Waste Rubber,” Waste Management, Vol. 23, No. 6, 2003, pp. 463-467.
|
[29]
|
G. S. Miguel, J. Aguodo, D. P. Serrano and J. M. Escola, “Thermal and Catalytic Conversion of Used Tyre Rubber and Its Polymeric Constituents Using Py-GC/MS,” Applied Catalysis B: Environmental, Vol. 64, No. 3-4, 2006, pp. 209-219.
|