Effect of High Temperatures on the Microstructure of Cement Paste

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Materials Science and Chemical Engineering

ISSN Print: 2327-6045
ISSN Online: 2327-6053
www.scirp.org/journal/msce
E-mail: msce@scirp.org

Google-based Impact Factor: 1.21
Citations

Journals Menu

"Effect of High Temperatures on the Microstructure of Cement Paste"
written by M. A. Tantawy,
published by Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Macro-and microstructural evolution of cement paste modified with MWCNTs under thermal shock conditions
	Journal of Building …, 2024

[2]	Compressive strength development and microstructure evolution of mortars prepared using reactivated cementitious materials under carbonation curing
	Developments in the Built …, 2024

[3]	Fire and postfire compressive strength of recycled aggregate concrete made with ceramic stoneware
	Figueirido… - Journal of Building …, 2024

[4]	Microstructure and macroscopic properties of low-carbon concrete subjected to elevated temperature: State-of-the-Art Review
	Journal of Building Engineering, 2024

[5]	The Use of Recycled Polyethylene in Water‐Oil Emulsion for Lightweight Concrete
	… Journal of Polymer …, 2024

[6]	Consolidation of Iodine-Laden Adsorbents into Cementitious Waste Forms Suitable for Geological Disposal
	ACS Applied …, 2024

[7]	Durability, thermo-physical characteristics, and mechanical strength prediction of green Portland cement matrix incorporating recycled soda-lime glass and lead glass
	Heliyon, 2024

[8]	Exploring enhanced high-temperature resistance: Analyzing the combined impact of fibers and nanoparticles in mortars
	Construction and Building …, 2024

[9]	Smart laying mortars for masonry structures: effects of lime/cement ratio and carbon nanomaterials content on self-sensing behavior
	Cement and Concrete …, 2024

[10]	Graphene nanoribbons: A novel additive for enhancing the fire resistance of cementitious composites
	… and Building Materials, 2024

[11]	Sugarcane Bagasse-Derived Carbon for Partial Replacement of Cementitious Material in Concrete
	Materials Circular Economy, 2024

[12]	Thermal impact on superplasticizer-free metakaolin-nano-silica binary and ternary mortars
	Materials at High …, 2024

[13]	Macro–Meso Damage Analysis of Tunnel Lining Concrete under Thermal–Mechanical Coupling Based on CT Images
	Materials, 2024

[14]	Understanding of Geochemical Reactions in Hydrogen-Injected Wells: Cement Integrity for Safe Underground Hydrogen Storage
	International Petroleum Technology …, 2024

[15]	Improved high-temperature resistance of limestone calcined clay cement (LC3) paste with biochar: Multiscale evaluation and mechanistic analysis
	Developments in the Built …, 2024

[16]	Influence of polyvinyl alcohol coated porous Al2O3 ceramic waste particles on cement properties in geothermal applications
	Construction and Building Materials, 2023

[17]	Effects of shrinkage-reducing admixtures and expansive agents on the self-sensing behavior of nanomodified cement-based materials
	Journal of Building …, 2023

[18]	Investigating the Microstructure and Mechanical Properties of Self-Curing Concrete Exposed to Elevated Temperature
	Journal of Engineering Research, 2023

[19]	Reactivation of hydrated cement and recycled concrete powders by thermal treatment for partial replacement of virgin cement
	2023

[20]	بررسی اثر استفاده از نانوسیلیس بر روی خصوصیات مکانیکی ملات ماسه سیمان تحت تأثیر حرارت با نگرش به تغییرات نانوساختارهای سیمانی‎
	تحقیقات بتن, 2023

[21]	Integration of thermal performance of cement-based composite modified with ZrB2 nanoparticles
	Journal of Thermal Analysis and Calorimetry, 2023

[22]	Improvement of the performance characteristics, fire resistance, anti-bacterial activity, and aggressive attack of polymer‐impregnated fired clay bricks-fly ash …
	Journal of Building …, 2023

[23]	Phase development of hydrated cement pastes with SCMs under delayed heating conditions below 100° C
	… and Building Materials, 2023

[24]	Performance of silica fume on preventing strength retrogression in hardened cement paste and mortar at elevated temperatures
	Buildings, 2023

[25]	Analysis of the phases and functions of the various compounds of calcium sulfoaluminate cement after exposure to high temperature
	Journal of Materials …, 2023

[26]	Properties of Fine Graded Perlite-Based Lightweight Cement Mortars Subjected to Elevated Temperatures
	Buildings, 2023

[27]	Carbonation curing of mortars produced with reactivated cementitious materials for CO2 sequestration
	Journal of Cleaner Production, 2023

[28]	Investigation of Waste Perlite and Recycled Concrete Powders as Supplementary Cementitious Materials
	SSRN Electronic Journal, 2023

[29]	The role of calcium aluminate cement in developing an efficient ultra-high performance concrete resistant to explosive spalling under high temperatures
	Construction and Building …, 2023

[30]	Use of Clay and Titanium Dioxide Nanoparticles in Mortar and Concrete—A State-of-the-Art Analysis
	Stratulat, P Mihai, IO Toma - Coatings, 2023

[31]	Strength recovery of thermally damaged high-performance concrete subjected to post-fire carbonation curing
	Cement and Concrete …, 2023

[32]	Sustainability of pre-treated and nano-fly ash powder on the thermal stability and environmental impact of green mortars under ambient conditions
	Journal of Building Engineering, 2023

[33]	Reactivation of hydrated cement powder by thermal treatment for partial replacement of ordinary portland cement
	Materials and …, 2023

[34]	Effects of ultrasound-assisted sulfuric acid treatment on the decontamination of Co nuclides in cement paste simulating radioactive concrete waste from dismantled …
	Construction and Building …, 2023

[35]	Effect of post-fire lime-saturated water and water–CO2 cyclic curing on strength recovery of thermally damaged high-performance concrete with different silica contents
	Cement and Concrete …, 2023

[36]	On the determination of 36Cl and 129I in solid materials from nuclear decommissioning activities
	Babot, M Vasile, A Dobney, S Boden… - … of Radioanalytical and …, 2022

[37]	Microstructural and mechanical properties of fiber-reinforced seawater sea-sand concrete under elevated temperatures
	Journal of Building …, 2022

[38]	Effect of pre-carbonation on the properties of cement paste subjected to high temperatures
	Journal of Building …, 2022

[39]	Use of hydrated cement pastes (HCP) as a CO2 sponge
	Journal of CO2 …, 2022

[40]	The effects of calcium hydroxide and activator chemistry on alkali-activated metakaolin pastes exposed to high temperatures
	Cement and Concrete Research, 2022

[41]	Effects of accelerated carbonation and high temperatures exposure on the properties of EAFS and BOFS pressed blocks
	Journal of Building Engineering, 2022

[42]	Sewage sludge ash-based mortar as construction material: Mechanical studies, macrofouling, and marine toxicity
	Science of The Total …, 2022

[43]	Understanding the role of graphene oxide nanoribbons–functionalized carbon nanotubes–graphene oxide (GNFG) complex in enhancing the fire resistance of …
	Construction and Building Materials, 2022

[44]	Properties of concrete subjected to severe accident conditions at Fukushima Daiichi Nuclear Power Plant
	Journal of Advanced …, 2022

[45]	Influence of microwaves in the early stage of alkali activation on the mechanical strength of alkali-activated materials
	Ceramics International, 2022

[46]	Amplitude-Modulation Vibro-Acoustic Technique for Damage Evaluation
	Structural Health …, 2022

[47]	Microstructural and Mechanical Characteristics of Fiber-Reinforced Cementitious Composites under High-Temperature Exposure
	Journal of Materials in …, 2022

[48]	Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes
	High Temperature Materials and …, 2022

[49]	An experimental study on properties of concrete incorporating colloidal nanosilica and alccofine
	Innovative Infrastructure Solutions, 2022

[50]	Effect of elevated temperature on the calcined clay-limestone and marble stone blended cement concrete
	Australian Journal of Civil …, 2022

[51]	Effect of Molarity of Potassium Hydroxide Solution on Heat Resistance of Fly Ash-Slag Based Geopolymer
	… 2021: Proceedings of the …, 2022

[52]	Impact of Calcium Hydroxide, Reduced Activator Concentration, and Flash-Calcined Metakaolin on Alkali-Activated Metakaolin at Ambient and High Temperatures
	2022

[53]	Waste paper ash as a hydraulic road binder: Hydration, mechanical and leaching considerations
	Journal of Environmental Management, 2022

[54]	Incorporación de un nanocompuesto híbrido de dióxido de vanadio-nanotubos de carbono en un mortero de cemento Portland y una pasta de yeso para la …
	2022

[55]	Desenvolvimento de um ligante álcali-ativado produzido a partir de cal de casca de ovo e cinza de casca de arroz para aplicação em elementos pré-fabricados
	2022

[56]	On the properties of new sustainable cementitious composites
	2021

[57]	Performance evaluation of cement paste incorporating ferro-nickel slag powder under elevated temperatures
	Case Studies in …, 2021

[58]	Behavior of Biochar-Modified Cementitious Composites Exposed to High Temperatures
	Materials, 2021

[59]	Macro–meso–micro experimental studies of calcined clay limestone cement (LC3) paste subjected to elevated temperature
	2021

[60]	The role of flame retardants in cement mortars exposed at elevated temperatures
	2021

[61]	TG/DTG-DSC and high temperature in-situ XRD analysis of natural thaumasite
	2021

[62]	High temperature resistance of a phase change cementitious material at elevated temperatures
	2021

[63]	Evaluating Residual Compressive strength of Post-fire Concrete using Raman Spectroscopy
	2021

[64]	The influence of brick dust and crushed brick on the properties of lime-based mortars exposed at elevated temperatures
	2021

[65]	Evaluation of the Pozzolanic Activity of Uncontrolled-Combusted Sewage Sludge Ash
	2021

[66]	Experimental Analysis of Changes in Cement Mortar Containing Oil Palm Boiler Clinker Waste at Elevated Temperatures in Different Cooling Conditions
	2021

[67]	High temperature influence on concrete produced by spherical shaped EAF slag fine aggregate–Physical and mechanical properties
	2020

[68]	Physical-mechanical behaviour and transformations at high temperature in a cement mortar with waste glass as aggregate
	2020

[69]	Multianalytical approach of stay-in-place polyvinyl chloride formwork concrete exposed to high temperatures
	2020

[70]	Influence of Exposure to Elevated Temperatures on the Physical and Mechanical Properties of Cementitious Thermal Mortars
	2020

[71]	Influence of water re-curing on microstructure of heat-damaged cement mortar characterized by low-field NMR and MIP
	2020

[72]	Rehydration on high temperature-mortars based on recycled glass as aggregate
	2020

[73]	Influence of temperature on bond–slip characteristics of concrete containing fly ash
	2020

[74]	Performance of reinforced concrete beam column joint under high temperature
	2020

[75]	CSH gel structure and water molecules behaviors under different chemical environments in a range of temperatures
	2020

[76]	Thermal and mechanical properties of concrete and its constituents at elevated temperatures: A review
	2020

[77]	MICROSTRUCTURAL AND PHYSICAL ALTERATIONS OF REACTIVE POWDER CONCRETE AFTER HIGH TEMPERATURE EXPOSURE
	2019

[78]	Thermal Behaviour of Reinforced Concrete Beam with Static loading Condition.
	International Journal of Recent Technology and Engineering, 2019

[79]	Thermal Path Reconstruction for Reinforced Concrete Under Fire
	Fire Technology, 2019

[80]	Investigation of Delayed Ettringite Formation Damage Process Using Simultaneous Neutron and X-ray Tomography
	2019

[81]	Physicochemical and mechanical changes of thermally damaged cement pastes and concrete for re-curing conditions
	2019

[82]	Effect of pre-treatments of guadua fibres on mechanical behaviour of cement composite boards
	2019

[83]	Thermal behavior of reinforced concrete beam with static loading condition
	Int. J. Recent Technol. Eng, 2019

[84]	THERMOGRAVIMETRIC ANALYSIS OF CONCRETE
	International Journal of Modern Trends in Engineering and Research, 2018

[85]	Concrete with Sustainable Fillers At Elevated Temperatures: A Review
	1910

[86]	Phase development of hydrated cement pastes with SCMs under delayed heating conditions below 100 C


[87]	지하공간 화재에 따른 콘크리트 손상과 내화재 적용에 대한 연구

[1]	Sugarcane Bagasse-Derived Carbon for Partial Replacement of Cementitious Material in Concrete Materials Circular Economy, 2024 DOI:10.1007/s42824-023-00096-4

[2]	The Use of Recycled Polyethylene in Water-Oil Emulsion for Lightweight Concrete International Journal of Polymer Science, 2024 DOI:10.1155/2024/8872370

[3]	Understanding of Geochemical Reactions in Hydrogen-Injected Wells: Cement Integrity for Safe Underground Hydrogen Storage Day 3 Wed, February 14, 2024, 2024 DOI:10.2523/IPTC-23620-MS

[4]	Consolidation of Iodine-Laden Adsorbents into Cementitious Waste Forms Suitable for Geological Disposal ACS Applied Engineering Materials, 2024 DOI:10.1021/acsaenm.3c00704

[5]	Consolidation of Iodine-Laden Adsorbents into Cementitious Waste Forms Suitable for Geological Disposal ACS Applied Engineering Materials, 2024 DOI:10.1021/acsaenm.3c00704

[6]	The effect of elevated temperature on the performance of pozzolanic cement mortar Discover Civil Engineering, 2024 DOI:10.1007/s44290-024-00056-0

[7]	The Use of Ground Recycled Concrete Cement as an Eco-Friendly Alternative Cement Material in Mortar Production Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2024 DOI:10.1007/s40996-024-01606-3

[8]	Thermal impact on superplasticizer-free metakaolin-nano-silica binary and ternary mortars Materials at High Temperatures, 2024 DOI:10.1080/09603409.2024.2329429

[9]	Microstructural Analysis of the Effect of Using Nano-silica on the Mechanical Properties of Cement–Sand Mortar Under the Effect of Heat International Journal of Concrete Structures and Materials, 2024 DOI:10.1186/s40069-024-00715-7

[10]	Study on the improvement of geothermal cement properties by nanofluid composed of deep eutectic solvent and graphene oxide Scientific Reports, 2024 DOI:10.1038/s41598-024-80012-1

[11]	The Use of Recycled Polyethylene in Water‐Oil Emulsion for Lightweight Concrete International Journal of Polymer Science, 2024 DOI:10.1155/2024/8872370

[12]	Residual flexural performance of large-scale ferronickel slag alkali-activated concrete slabs after fire exposure Open Research Europe, 2024 DOI:10.12688/openreseurope.18634.1

[13]	Sugarcane Bagasse-Derived Carbon for Partial Replacement of Cementitious Material in Concrete Materials Circular Economy, 2024 DOI:10.1007/s42824-023-00096-4

[14]	Influence of polyvinyl alcohol coated porous Al2O3 ceramic waste particles on cement properties in geothermal applications Construction and Building Materials, 2023 DOI:10.1016/j.conbuildmat.2023.131046

[15]	Effect of elevated temperature on the calcined clay-limestone and marble stone blended cement concrete Australian Journal of Civil Engineering, 2023 DOI:10.1080/14488353.2022.2073048

[16]	Effects of ultrasound-assisted sulfuric acid treatment on the decontamination of Co nuclides in cement paste simulating radioactive concrete waste from dismantled nuclear power plants Construction and Building Materials, 2023 DOI:10.1016/j.conbuildmat.2023.130878

[17]	Reactivation of hydrated cement powder by thermal treatment for partial replacement of ordinary portland cement Materials and Structures, 2023 DOI:10.1617/s11527-023-02133-9

[18]	Influence of polyvinyl alcohol coated porous Al2O3 ceramic waste particles on cement properties in geothermal applications Construction and Building Materials, 2023 DOI:10.1016/j.conbuildmat.2023.131046

[19]	Properties of Concrete Subjected to Severe Accident Conditions at Fukushima Daiichi Nuclear Power Plant Journal of Advanced Concrete Technology, 2022 DOI:10.3151/jact.20.152

[20]	Effect of elevated temperature on the calcined clay-limestone and marble stone blended cement concrete Australian Journal of Civil Engineering, 2022 DOI:10.1080/14488353.2022.2073048

[21]	An experimental study on properties of concrete incorporating colloidal nanosilica and alccofine Innovative Infrastructure Solutions, 2022 DOI:10.1007/s41062-022-00800-4

[22]	On the determination of 36Cl and 129I in solid materials from nuclear decommissioning activities Journal of Radioanalytical and Nuclear Chemistry, 2022 DOI:10.1007/s10967-022-08327-9

[23]	Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes High Temperature Materials and Processes, 2022 DOI:10.1515/htmp-2022-0030

[24]	Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes High Temperature Materials and Processes, 2022 DOI:10.1515/htmp-2022-0030

[25]	Evaluating residual compressive strength of post-fire concrete using Raman Spectroscopy Forensic Science International, 2021 DOI:10.1016/j.forsciint.2021.110874

[26]	The influence of brick dust and crushed brick on the properties of lime-based mortars exposed at elevated temperatures Construction and Building Materials, 2021 DOI:10.1016/j.conbuildmat.2021.123743

[27]	The influence of brick dust and crushed brick on the properties of lime-based mortars exposed at elevated temperatures Construction and Building Materials, 2021 DOI:10.1016/j.conbuildmat.2021.123743

[28]	Evaluating residual compressive strength of post-fire concrete using Raman Spectroscopy Forensic Science International, 2021 DOI:10.1016/j.forsciint.2021.110874

[29]	Experimental Analysis of Changes in Cement Mortar Containing Oil Palm Boiler Clinker Waste at Elevated Temperatures in Different Cooling Conditions Crystals, 2021 DOI:10.3390/cryst11080988

[30]	Behavior of Biochar-Modified Cementitious Composites Exposed to High Temperatures Materials, 2021 DOI:10.3390/ma14185414

[31]	Influence of Exposure to Elevated Temperatures on the Physical and Mechanical Properties of Cementitious Thermal Mortars Applied Sciences, 2020 DOI:10.3390/app10062200

[32]	Influence of temperature on bond–slip characteristics of concrete containing fly ash Asian Journal of Civil Engineering, 2020 DOI:10.1007/s42107-020-00258-8

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Materials Science and Chemical Engineering

Journal of Materials Science and Chemical Engineering

Journals Menu

Home

About SCIRP

Service

Policies