Venkataraman R., Ravikumar B., Krishnamurthy R., Das D.K.; “ A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates”, Surface and Coatings Technology, Volume 201, Number 6, (2006), 3087-3095.

has been cited by the following article:

• TITLE: A Review on Detonation Gun Sprayed Coatings

  AUTHORS: Lakhwinder Singh, Vikas Chawla, J.S. Grewal

  KEYWORDS: thermal spraying, detonation gun

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, March 20, 2012

  ABSTRACT: Materials are precious resources. Different methods are employed to protect the material from degradation. Thermal spraying is one of the most effective method to protect the material from wear, high temperature corrosion, stresses and erosion, thus increasing the life of material in use. Detonation gun spraying is one of the thermal spraying techniques known for providing hard, wear resistant and dense microstructured coatings. This paper summarizes the results of previous research done by various authors on different coatings done by detonation gun spraying technique.