|
[1]
|
Mechanical behaviour of aluminium based metal matrix composites reinforced with aluminium oxide
|
|
NULL |
|
|
|
[2]
|
Effect of the Hardness in Al/TiB2 MMC with Sand Mould and Permanent Mould
|
|
Materials, Design and …,
2023 |
|
|
|
[3]
|
Experimental investigation of wear properties of AA6061+ Al2O3 metal matrix composite fabricated by vacuum stir casting method
|
|
Materials Today: Proceedings,
2022 |
|
|
|
[4]
|
On the low-cycle fatigue behavior of aluminum alloys under influence of tensile pre-strain histories and strain ratio
|
|
International Journal of …,
2022 |
|
|
|
[5]
|
Investigation on Inorganic Salts K2TiF6 and KBF4 to Develop Nanoparticles Based TiB2 Reinforcement Aluminium Composites
|
|
Bioinorganic …,
2022 |
|
|
|
[6]
|
Investigation on Corrosion Behaviour of Hybrid Aluminium Metal Matrix Composite Welded by Friction Stir Welding
|
|
Materials Today …,
2022 |
|
|
|
[7]
|
Computational simulation of IC engine cooling using different materials for different shapes of fins: a comparative study
|
|
International Journal of Ambient …,
2022 |
|
|
|
[8]
|
ANALISIS PENGARUH PARAMETER PEMESINAN, METODE PENYAYATAN DAN MATERIAL PISAU FRAIS TERHADAP KEKASARAN PERMUKAAN ALUMINIUM …
|
|
Jurnal Vokasi Mekanika …,
2022 |
|
|
|
[9]
|
Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode
|
|
Advances in Materials …,
2022 |
|
|
|
[10]
|
Effect of pin geometry and orientation on friction and wear behavior of nickel-coated EN8 steel pin and Al6061 alloy disc pair
|
|
advances in materials …,
2022 |
|
|
|
[11]
|
An Investigation into the Effect of Vacuum Conditions on the Filling Analysis of the Pressure Casting Process
|
|
International Journal of Metalcasting,
2022 |
|
|
|
[12]
|
Manufacturing of (Al–10Zn)/TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties
|
|
Materials Science and …,
2022 |
|
|
|
[13]
|
Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing
|
|
Journal of Solid and Fluid …,
2022 |
|
|
|
[14]
|
Investigation of the Mechanical Behavior of Synthesized Al6061/TiO2 Microcomposites Using an Innovative Stir Casting Method
|
|
Mawla… - Nanomaterials,
2022 |
|
|
|
[15]
|
Optimization of 1U nanosatellite on the basis of strength and weight using different Materials: A numerical approach
|
|
Materials Today: Proceedings,
2022 |
|
|
|
[16]
|
Effects of heat treatment on the surface quality and improvement in formability of deformation machined products of Al 6061
|
|
Journal of …,
2022 |
|
|
|
[17]
|
Comparative Analysis and Optimization of Thermoelectric Machining of Alumina and Silicon Carbide-Reinforced Aluminum Metal Matrix Composites …
|
|
Journal of Advanced …,
2022 |
|
|
|
[18]
|
Effects of sintering techniques and parameters on microstructure and mechanical properties of Al-15Si-2, 5Cu-0.5 Mg compacts and Al-15Si-2, 5Cu-0.5 Mg/B4C …
|
|
Materials Today Communications,
2022 |
|
|
|
[19]
|
Effect of nitinol on mechanical properties of AA6061 metal matrix composite: A review
|
|
Materials Today …,
2021 |
|
|
|
[20]
|
Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion
|
|
… of Experimental & …,
2021 |
|
|
|
[21]
|
Wear Behavior of Al6061/TiO2 Composites Synthesized by Stir Casting Process
|
|
Journal of Advanced Engineering Trends,
2021 |
|
|
|
[22]
|
DEVELOPMENT AND CHARACTERIZATION OF SUSTAINABLE NOVEL ALUMINUM METAL MATRIX COMPOSITES
|
|
2021 |
|
|
|
[23]
|
Influence of reaction synthesis feedstocks on solidification defect formation and microstructure-property relationships in electron beam freeform fabrication of …
|
|
2021 |
|
|
|
[24]
|
Recent progress in hybrid aluminum composite: manufacturing and application
|
|
Metals,
2021 |
|
|
|
[25]
|
Friction stir welding of AA7075-T6/TiB2 in situ cast composites plates using scarf joint configuration
|
|
Advances in Materials and …,
2021 |
|
|
|
[26]
|
Mechanical properties of titanium diboride particles reinforced aluminum alloy matrix composites: a comprehensive review
|
|
Advances in Materials …,
2021 |
|
|
|
[27]
|
Research Summary on the Processing, Mechanical and Tribological Properties of Aluminium Matrix Composites as Effected by Fly Ash Reinforcement
|
|
Crystals,
2021 |
|
|
|
[28]
|
Synthesis of graphene–aluminium matrix nanocomposites: mechanical and tribological properties
|
|
2021 |
|
|
|
[29]
|
Study of Mechanical and Tribological Behavior of Aluminium Metal Matrix Composite Reinforced with Alumina
|
|
2021 |
|
|
|
[30]
|
Production of Aluminum Matrix Composite Material by Active Carbon Additive
|
|
2021 |
|
|
|
[31]
|
Taguchi Optimization for the Production of Optimized Sustainable Novel Aluminium MMC Using Squeeze Stir Casting Process
|
|
2021 |
|
|
|
[32]
|
A Numerical and Experimental Investigation of the Thermal Behavior of a Permanent Metal Mold with a Conventional Cooling Channel and a New Cooling Channel …
|
|
2021 |
|
|
|
[33]
|
Manufacturing of Al-Li-Si3N4 metal matrix composite for weight reduction
|
|
2021 |
|
|
|
[34]
|
Characterization of physical and mechanical properties of aluminium based composites reinforced with titanium diboride particulates
|
|
2021 |
|
|
|
[35]
|
TOZ METALURJİSİ YÖNTEMİ İLE A356 MATRİSLİ HİBRİT KOMPOZİT MALZEME ÜRETİMİ VE KARAKTERİZASYONU
|
|
2021 |
|
|
|
[36]
|
Fabrication characteristics and mechanical behaviour of aluminium alloy reinforced with Al2O3 and coconut shell particles synthesized by stir casting
|
|
2021 |
|
|
|
[37]
|
Investigation of Corrosion Characteristic of Al6063 Reinforced with Al2O3-CBA by Using Stir Casting
|
|
2021 |
|
|
|
[38]
|
Effect of heat treatment and biosilica on mechanical, wear, and fatigue behavior of Al-T i B 2 in situ metal matrix composite
|
|
2021 |
|
|
|
[39]
|
Particulate Mollusc Shells as Reinforcements for Aluminium Matrix Composites: A Review
|
|
2021 |
|
|
|
[40]
|
Investigation of mechanical & corrosion properties of graphene, R-glass fiber reinforced Aluminium 2024 hybrid composites
|
|
2021 |
|
|
|
[41]
|
Corrosion Behavior of Stir Cast Al6061-B4C/TiB2 Composites Processed by Post-Accumulative Roll Bonding
|
|
2021 |
|
|
|
[42]
|
Effect of Heat Treatment on Microstructure and Hardness of Graphene Nanoplatelets Reinforced Al-Zn-Mg-Cu Alloy Composite
|
|
ASME …,
2021 |
|
|
|
[43]
|
Mechanical Properties Investigation of Aluminium Silicon Carbide Hybrid Metal Matrix Composites (MMCs)
|
|
2020 |
|
|
|
[44]
|
DEVELOPMENT AND CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR MACHINING WITH WEDM
|
|
2020 |
|
|
|
[45]
|
ALUMINUM BASED HYBRID METAL MATRIX COMPOSITES: A REVIEW OF SELECTION PHILOSOPHY AND MECHANICAL PROPERTIES FOR ADVANCED APPLICATIONS
|
|
International Journal of Mechanical and Production Engineering Research and Developmen,
2020 |
|
|
|
[46]
|
Development and Characterization of AI 6061 MoS2 MMC and optimization of process parameters for machining with WEDM
|
|
2020 |
|
|
|
[47]
|
Processing, properties, and microstructure of recycled aluminum alloy composites produced through an optimized stir and squeeze casting processes
|
|
2020 |
|
|
|
[48]
|
Tribological behaviour of aluminum alloy (AA7075) based hybrid composites
|
|
2020 |
|
|
|
[49]
|
Mechanical and Tribological Characterizations of Al/TiB2 composites
|
|
2020 |
|
|
|
[50]
|
Corrosion characterization of Al 6061/Red Mud MMCs in hydrochloric Acid
|
|
2020 |
|
|
|
[51]
|
Enhancement of corrosion behaviour of AL6061-B4C-RHA reinforced hybrid composite
|
|
2020 |
|
|
|
[52]
|
Experimental analysis of aluminium alloy LM25 with carbon in composite material
|
|
2020 |
|
|
|
[53]
|
Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites
|
|
2020 |
|
|
|
[54]
|
MECHANICAL PROPERTIES AND WEAR CHARACTERIZATION OF AA 6082 ALUMINUM USING INDUSTRIAL WASTE FLY ASH
|
|
2020 |
|
|
|
[55]
|
Investigation of Production and Abrasive Wear Behavior of Functionally Graded TiB 2/Al and TiB 2/Al–4Cu Composites
|
|
2020 |
|
|
|
[56]
|
Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid …
|
|
2020 |
|
|
|
[57]
|
Effects of yttrium addition and aging on mechanical properties of AA2024 fabricated through multi-step stir casting
|
|
2020 |
|
|
|
[58]
|
An Effect of EDM on AL6061-5% SiC as stir cast MMC
|
|
2020 |
|
|
|
[59]
|
Investigation of production and abrasive wear behavior of functionally graded TiB2/Al and TiB2/Al–4Cu composites
|
|
Transactions of the Indian Institute of Metals,
2020 |
|
|
|
[60]
|
Experimental investigation on the mechanical properties of LM6 aluminum alloy reinforced with boron carbide and titanium hybrid composites
|
|
2019 |
|
|
|
[61]
|
An investigation on the Corrosion Behavior of Al (Mg-TiFe-SiC) Matrix Composite in Acidic and Chloride Media
|
|
2019 |
|
|
|
[62]
|
DEVELOPMENT OF HIGH STRENGTH TO WEIGHT RATIO ALUMINIUM–MAGNESIUM ALLOY WITH ENHANCED CORROSION RESISTANCE
|
|
2019 |
|
|
|
[63]
|
Tensile Behavior of Aluminium2014 Reinforced with Boron Carbide and Copper Coated Short Basalt Fiber Based Hybrid Composites
|
|
2019 |
|
|
|
[64]
|
Development of aluminium 5056/SiC/bagasse ash hybrid composites using stir casting method
|
|
2019 |
|
|
|
[65]
|
On the multi-parametric optimization of quality characteristics of the hybrid Al-6061 composites fabricated through powder metallurgy
|
|
2019 |
|
|
|
[66]
|
Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
|
|
2019 |
|
|
|
[67]
|
Effect of Heat Treatment on Hardness of Aluminium Alloy Reinforced with Rice Husk Ash
|
|
2019 |
|
|
|
[68]
|
TAGUCHI METHOD PARAMETRIC OPTIMIZATION OF SURFACE ROUGHNESS AND MRR ON HPMMC IN CNC TURNING PHASE
|
|
… JOURNAL ENGINEERING AND …,
2019 |
|
|
|
[69]
|
Surface Characteristics of Drilled Holes in Al–TiB2 Metal Matrix Composites Using Electric Discharge Machine
|
|
Advances in Manufacturing Processes,
2019 |
|
|
|
[70]
|
Investigation of Erosion-Corrosion of Aluminium Alloy Composites: Influence of Slurry Composition and Speed in different mediums
|
|
2019 |
|
|
|
[71]
|
Microstructures and mechanical properties of Ti/Al/Mg/Al/Ti laminates with various rolling reductions
|
|
2019 |
|
|
|
[72]
|
Influence of fly ash on the microstructure and mechanical properties of AA6063 alloy using compocasting technique
|
|
2019 |
|
|
|
[73]
|
Comparison of the Effects of B4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method
|
|
2019 |
|
|
|
[74]
|
Titanium Diboride Reinforced Aluminium Metal Matrix Composites: A
|
|
2019 |
|
|
|
[75]
|
STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES
|
|
2019 |
|
|
|
[76]
|
ZnO nanoparticles impregnated polymer composite as superhydrophobic anti-corrosive coating for Aluminium-6061 alloy
|
|
2019 |
|
|
|
[77]
|
A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
|
|
2019 |
|
|
|
[78]
|
EXPERIMENTAL INVESTIGATION ON THE MECHANICAL PROPERTIES OF LM6 ALUMINUM ALLOY REINFORCED WITH BORON CARBIDE AND TITANIUM …
|
|
2019 |
|
|
|
[79]
|
Investigation of High Stress Abrasive and Erosive Wear Behaviour of AA336/TiB2/SiC Ex Situ Composites
|
|
2019 |
|
|
|
[80]
|
Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites
|
|
2019 |
|
|
|
[81]
|
COMPOSITO DE MATRIZ DE ALUMINIO CON CENIZA DE BAGAZO DE CANA DE AZUCAR COMO MATERIAL DE REFUERZO
|
|
2019 |
|
|
|
[82]
|
Aluminum Matrix Composite with Sugarcane Bagasse Ash as Reinforcement Material
|
|
2019 |
|
|
|
[83]
|
Titanium diboride reinforced aluminum composite as a robust material for automobile applications
|
|
2019 |
|
|
|
[84]
|
A review on mechanical and wear characteristics of particulate reinforced Al-alloy based MMC
|
|
2019 |
|
|
|
[85]
|
Mechanical Behavioural Aspects of Al-356 Under the Influence of Boron Carbide and Magnesium
|
|
2019 |
|
|
|
[86]
|
Effects of Reinforcement on Tribological Behaviour of Aluminium Matrix Composites
|
|
2019 |
|
|
|
[87]
|
Optimization of dry sliding wear behaviour of AA6061 (as cast) and AA6061 (HT) aluminium alloy using design of experiment approach
|
|
2019 |
|
|
|
[88]
|
An Investigation of the Mechanical Properties of HybridComposites in Applications of Automotive Industry
|
|
2019 |
|
|
|
[89]
|
A Comparative Study on Sliding wear Behavior of Aluminum Alloy with B4C and SiC Reinforced Metal Matrix Composites
|
|
2018 |
|
|
|
[90]
|
Approach to Determine the Temperature of Aluminum Alloy AL 6061 with Unknown Emissivity using Noncontact Technique
|
|
2018 |
|
|
|
[91]
|
A Study on Mechanical Properties of Aluminum-4.5% Copper Alloy Metal Matrix Composites Reinforced with Alumina Fibers Using Squeeze Casting Process
|
|
2018 |
|
|
|
[92]
|
MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE.
|
|
2018 |
|
|
|
[93]
|
Thermal Analysis of Engine Cylinder in Al/TiB2 and Al/SiC Using ANSYS
|
|
2018 |
|
|
|
[94]
|
COMBINED EFFECTS OF STIR CASTING AND IN-SITU TECHNIQUES IN THE PRODUCTION OF AL 6061-TIB2 METAL MATRIX COMPOSITE WITH …
|
|
International Journal of Mechanical Engineering and Technology (IJMET),
2018 |
|
|
|
[95]
|
Dry-Sliding Wear Analysis of SiC Reinforced AA6063 As-Cast Aluminum Metal Matrix Composites
|
|
2018 |
|
|
|
[96]
|
Effect of TiB2 particle addition on the mechanical properties of Al/TiB2 in situ formed metal matrix composites
|
|
2018 |
|
|
|
[97]
|
Review on wear characteristics of aluminum silicon carbide reinforced with basalt fibre
|
|
2018 |
|
|
|
[98]
|
Enhancing the Mechanical Properties of Metal Matrix Composite by Reinforcing Aluminium 6063 with Sic & Graphite
|
|
International Journal of Engineering Research & Technology,
2018 |
|
|
|
[99]
|
Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Sugarcane Bagasse Ash
|
|
2018 |
|
|
|
[100]
|
On the Formation and Distribution of In Situ Synthesized TiB2 Reinforcements in Cast Aluminium Matrix Composites
|
|
Journal of Composites Science,
2018 |
|
|
|
[101]
|
Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Rice Husk Ash
|
|
2018 |
|
|
|
[102]
|
Effect of ceramic reinforcement on mechanical properties of aluminum matrix composites produced by stir casting process
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[103]
|
A Comparative Study on Sliding wear Behavior of of Aluminum Alloy with B4C and SiC Reinforced Metal Matrix Composites
|
|
International Journal of Science, Engineering and Technology Research (IJSETR),
2018 |
|
|
|
[104]
|
REINFORCEMENT AND HOT WORKABILITY OF ALUMINIUM ALLOY 7075 PARTICULATE COMPOSITES: A REVIEW
|
|
2018 |
|
|
|
[105]
|
Aluminium Alloy Composites and its Machinability studies; A Review
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[106]
|
Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite
|
|
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017),
2018 |
|
|
|
[107]
|
Effect of matrix powder and reinforcement content on tribological behavior of particulate 6061Al-TiB2 composites
|
|
Journal of Composite Materials,
2018 |
|
|
|
[108]
|
Comparative study of aluminium with SiC and TiB2 as reinforce particulate and with FEA
|
|
Materials Research Express,
2018 |
|
|
|
[109]
|
An investigation on the tensile properties and micro-structure of hybrid metal matrix composites
|
|
International Journal of Materials and Product Technology,
2018 |
|
|
|
[110]
|
A novel High-Entropy Alloy-based composite material
|
|
Journal of Alloys and Compounds,
2018 |
|
|
|
[111]
|
A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5% COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING …
|
|
2018 |
|
|
|
[112]
|
Investigation of Flexure Strength of Aluminum Composites Reinforced with Iron Fibers
|
|
2018 |
|
|
|
[113]
|
Study on Mechanical Properties of Rice Husk Ash and Fly Ash Reinforcement in Aluminium (Al 6061) Metal Matrix Composites
|
|
2018 |
|
|
|
[114]
|
Optimization of EDM Parameters for Al–TiC Composites Prepared through Powder Metallurgy Route
|
|
2018 |
|
|
|
[115]
|
Design And Fabrication Of Fatigue Test Rig And Preliminary Investigation On Flax Composite Beam
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[116]
|
Mechanical Properties of Al 6061/TiB2 In-Situ Formed Metal Matrix Composites
|
|
Journal of Advanced Microscopy Research,
2018 |
|
|
|
[117]
|
FRICTION-STIR INCREMENTAL SHEET FORMING OF ALUMINUM ALLOY AND METAL MATRIX COMPOSITE
|
|
2018 |
|
|
|
[118]
|
A study on mechanical properties of aluminium-4.5% copper alloy metal matrix composites reinforced with alumina fibers using squeeze casting process
|
|
2018 |
|
|
|
[119]
|
Combined effects of stir casting and in-situ techniques in the production of Al 6061-TiB2 metal matrix composite with different reaction holding times and its …
|
|
2018 |
|
|
|
[120]
|
EVALUATION OF A356-B4C COMPOSITES FABRICATED THRU ULTRASONIC ASSISTED STIR CASTING TECHNIQUE
|
|
2018 |
|
|
|
[121]
|
MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
|
|
2018 |
|
|
|
[122]
|
MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE
|
|
2018 |
|
|
|
[123]
|
Controlling factors in aluminum matrix composites fabrication
|
|
Anusandhan,
2018 |
|
|
|
[124]
|
Processing of aluminium metal matrix composites-a review
|
|
Journal of …,
2017 |
|
|
|
[125]
|
Fabrication of LM25/SiO2 Metal Matrix Composite and Optimization of Wear Process Parameters Using Design of Experiment.
|
|
Tribology in industry,
2017 |
|
|
|
[126]
|
Desarrollo y caracterización de un material compuesto de matriz de aluminio
|
|
2017 |
|
|
|
[127]
|
A COMPARATIVE STUDY ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY AND THE MMC
|
|
International Journal of Research Sciences and Advanced Engineering [IJRSAE],
2017 |
|
|
|
[128]
|
EVALUTION OF MECHANICAL PROPERTIES OF ALUMINIUM/SILICON CARBIDE/FLY ASH BRAKE ROTOR
|
|
International Research Journal of Engineering and Technology,
2017 |
|
|
|
[129]
|
Performance investigation of aluminum 6061 metal matrix composite
|
|
Advances in Natural and Applied Sciences,
2017 |
|
|
|
[130]
|
Effective Hazard Control: An Imperative for Managing Health, Safety and Environmental Challenges of Construction Projects in Nigeria
|
|
Journal of Scientific and Engineering Research,
2017 |
|
|
|
[131]
|
Effect of pouring temperature on A356-TiB2 MMCs cast in sand and permanent moulds by in-situ method
|
|
Journal of the Mechanical Behavior of Materials,
2017 |
|
|
|
[132]
|
Wear behavior of Al-7% Si-0.3% Mg/melon shell ash particulate composites
|
|
2017 |
|
|
|
[133]
|
Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite
|
|
International Journal of Machining and Machinability of Materials,
2017 |
|
|
|
[134]
|
Effect of Particle Size on Mechanical Properties of Al-RMp Metal Matrix Composites
|
|
2017 |
|
|
|
[135]
|
STUDIES ON MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF 1.2MG-0.70FE-0.40CU REINFORCED WITH GRAPHITE
|
|
International Journal oF Engineering Sciences &Management Research,
2017 |
|
|
|
[136]
|
Investigation of Mechanical Properties on Aluminium Based Hybrid Composites
|
|
2017 |
|
|
|
[137]
|
Effects of Precipitation Hardening on Mechanical Properties of Multistage Stirred Cast AA6063 Composites
|
|
2017 |
|
|
|
[138]
|
Nanocomposites Mechanical and Tribological Properties Using Graphene-Coated-SiC Nanoparticles (GCSiCNP) for Light Weight Applications
|
|
Proceedings of the 3rd Pan American Materials Congress,
2017 |
|
|
|
[139]
|
Failure Response of Simultaneously Pre-Stressed and Laser Irradiated Aluminum Alloys
|
|
Applied Sciences,
2017 |
|
|
|
[140]
|
Effect of Applied Pressure on the Mechanical Properties of 6061 Aluminum Alloy Welded Joints Prepared by Friction Stir Welding
|
|
2017 |
|
|
|
[141]
|
Fabrication of LM25/SiO 2 Metal Matrix Composite and Optimization of Wear Process Parameters Using Design of Experiment.
|
|
Tribology in Industry,
2017 |
|
|
|
[142]
|
Effect of Heat Treatment on Mechanical and Wear Characterization of Coconut Shell Ash and E-glass Fiber Reinforced Aluminum Hybrid Composites
|
|
American Journal of Materials Science,
2016 |
|
|
|
[143]
|
Konsolidacija aluminijskog praha
|
|
2016 |
|
|
|
[144]
|
Study on Mechanical Properties and Microstructure of Aluminum Alloy 63401 Metal Matrix Composite Reinforced with Silicon Carbide Powder
|
|
2016 |
|
|
|
[145]
|
Investigation of micro-structural and mechanical properties of metal matrix composite A359/B 4 C through electromagnetic stir casting
|
|
2016 |
|
|
|
[146]
|
Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite
|
|
Transactions of the Indian Institute of Metals,
2016 |
|
|
|
[147]
|
MULTI-OBJECTIVE OPTIMIZATION OF TRIBOLOGICAL PARAMETERS OF HYBRID COMPOSITES USING GREY RELATIONAL ANALYSIS
|
|
Int. J. Chem. Sci.,
2016 |
|
|
|
[148]
|
Fabrication, Reinforcement and Characterization of Metal Matrix Composites (MMCs) using Rice Husk Ash and Aluminium Alloy (A-356.2)
|
|
International Journal of Scientific & Engineering Research,
2016 |
|
|
|
[149]
|
Experimental Evaluation of Process Parameters Effect on Mechanical and Machining Properties of Al6061–Cu–SiCp-Reinforced Metal Matrix Composite
|
|
Arabian Journal for Science and Engineering,
2016 |
|
|
|
[150]
|
TRIBOLOGICAL PERFORMANCE OPTIMIZATION OF STIR-CAST AL-TIB^ sub 2^ METAL MATRIX COMPOSITES USING TAGUCHI-BASED GREY RELATION ANALYSIS
|
|
Journal of Manufacturing Technology Research,
2016 |
|
|
|
[151]
|
Study on Mechanical Properties of AMCs produced by Stir Casting Method
|
|
KSMPE Autumn Conference 2016,
2016 |
|
|
|
[152]
|
The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al 2 O 3+ SiC/Al6061 Hybrid Composites
|
|
2016 |
|
|
|
[153]
|
Wear behavior of aluminum matrix hybrid composites fabricated through friction stir welding process
|
|
Journal of Iron and Steel Research, International,
2016 |
|
|
|
[154]
|
In-situ synthesis of aluminum-titanium diboride metal matrix hybrid nanocomposite
|
|
ProQuest Dissertations Publishing,
2016 |
|
|
|
[155]
|
The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al2O3+ SiC/Al6061 Hybrid Composites
|
|
2016 |
|
|
|
[156]
|
Synthesis and characterization of TiB 2 reinforced aluminium matrix composites: a review
|
|
2016 |
|
|
|
[157]
|
Investigation of micro-structural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting
|
|
2016 - NISCAIR-CSIR,
2016 |
|
|
|
[158]
|
TRIBOLOGICAL PERFORMANCE OPTIMIZATION OF STIR-CAST AL-TIB^ sub 2^ METAL MATRIX COMPOSITES USING TAGUCHI-BASED GREY RELATION …
|
|
2016 |
|
|
|
[159]
|
Stir casting of in–situ Al 6061 TiB2 metal matrix composite synthesized with different reaction holding times
|
|
Int. J. Eng. Res. Technol,
2015 |
|
|
|
[160]
|
A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs)
|
|
2015 |
|
|
|
[161]
|
Determination of Warm Working Temperature Range for In Situ Al m–TiB 2p Composite
|
|
2015 |
|
|
|
[162]
|
MECHANICAL PROPERTIES OF LEAF ASHES REINFORCED ALUMINUM ALLOY METAL MATRIX COMPOSITES
|
|
International Journal of Applied Engineering Research,
2015 |
|
|
|
[163]
|
THERMAL IMAGING-ASSIST HAND
|
|
2015 |
|
|
|
[164]
|
Design and Fabrication of a Stir Casting Furnace Set-Up
|
|
Int. Journal of Engineering Research and Applications,
2015 |
|
|
|
[165]
|
Razvoj titan-magnezij kompozita za biomedicinsku primjenu
|
|
2015 |
|
|
|
[166]
|
Thermal and Electrical Transport Measurements in Metals
|
|
2015 |
|
|
|
[167]
|
Stir Casting of in-situ Al 6061TiB2 Metal Matrix Composite Synthesized with Different Reaction Holding Times
|
|
International Journal of Engineering Research & Technology,
2015 |
|
|
|
[168]
|
Comparative Analysis of Al/TiB2 Metal Matrix Composites in Different Mould Conditions
|
|
Journal of Advanced Microscopy Research,
2015 |
|
|
|
[169]
|
Thermal and Electrical Transport Measurements in Wrought and Cast Aluminum Alloys
|
|
2015 |
|
|
|
[170]
|
Characterization of hybrid aluminum matrix composites for advanced applications–A review
|
|
Journal of Materials Research and Technology,
2015 |
|
|
|
[171]
|
A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs).
|
|
International Journal of Scientific & Engineering Research,
2015 |
|
|
|
[172]
|
Al 6061-TiB 2 Metal Matrix Composite Synthesized with Different Reaction Holding Times by In-Situ Method
|
|
International Journal of Composite Materials,
2015 |
|
|
|
[173]
|
Study on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting Method
|
|
Applied Mechanics and Materials,
2015 |
|
|
|
[174]
|
Modeling and analysis of process parameters on metal removal rate (MRR) in machining of aluminium titanium diboride (Al-TiB2) composite
|
|
Multidiscipline Modeling in Materials and Structures,
2015 |
|
|
|
[175]
|
Hardness and Wear Characteristics of Hybrid Aluminium Metal Matrix Composites Produced by Stir Casting Technique
|
|
Materials Today: Proceedings,
2015 |
|
|
|
[176]
|
Synthesis and Characterization of TiB2 Reinforced Aluminium Matrix Composites: A Review
|
|
Journal of The Institution of Engineers (India): Series D,
2015 |
|
|
|
[177]
|
Optimization of process parameters during machining of thixoformed A356-5TiB 2 in-situ composite using Design of Experiments
|
|
2015 |
|
|
|
[178]
|
Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites
|
|
2015 |
|
|
|
[179]
|
LOAN PERFORMANCE IN SELECTED INDIAN PUBLIC SECTOR BANKS - A COMPARATIVE STUDY
|
|
International Journal of Engineering Sciences & Management Research,
2015 |
|
|
|
[180]
|
Ageing behavior of aluminum hybrid metal matrix composites
|
|
2014 |
|
|
|
[181]
|
EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU REINFORCED SiCP METAL MATRIX COMPOSITES
|
|
2014 |
|
|
|
[182]
|
Ultrasound assisted low-temperature synthesis of TiB2 and Al3Ti particulates in molten aluminum
|
|
2014 |
|
|
|
[183]
|
Ultrasonic Fatigue Endurance of Aluminum Alloy AISI 6061-T6 on Pre-corroded and Non-corroded Specimens
|
|
Metallurgical and Materials Transactions A,
2014 |
|
|
|
[184]
|
Overview of Aluminium Matrix Composites for Automotive Applications
|
|
International Journal of Applied Engineering Research,
2014 |
|
|
|
[185]
|
An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites
|
|
Procedia Engineering,
2014 |
|
|
|
[186]
|
Combined Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of Al-Ti Alloy
|
|
International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering,
2014 |
|
|
|
[187]
|
Hybrid Aluminium Metal Matrix Composite Reinforced with SiC and TiB2
|
|
Procedia Engineering,
2014 |
|
|
|
[188]
|
Production characterization and friction stir welding of aluminum 6061 matrix composite reinforced with boron carbide
|
|
2014 |
|
|
|
[189]
|
Production characterization and friction stir welding of aa6061zrb2 in situ composites
|
|
2014 |
|
|
|
[190]
|
Determination of Warm Working Temperature Range for In Situ Alm–TiB2p Composite
|
|
Journal of The Institution of Engineers (India): Series D,
2014 |
|
|
|
[191]
|
Development and testing of Al5083 alloy reinforced by SiC particles
|
|
2014 |
|
|
|
[192]
|
Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC P Metal Matrix Composite
|
|
Journal of Minerals and Materials Characterization and Engineering,
2014 |
|
|
|
[193]
|
Microstructure and Mechanical Behaviour of Stir-Cast Al-Mg-Sl Alloy Matrix Hybrid Composite Reinforced with Corn Cob Ash and Silicon Carbide
|
|
2014 |
|
|
|
[194]
|
Comparative Study of Composites Reinforced With SiC and TiB2
|
|
Procedia Engineering,
2014 |
|
|
|
[195]
|
Effects of Reinforced Particulates on Properties of Aluminium Metal Matrix Composite
|
|
2014 |
|
|
|
[196]
|
Production and Characterization of Al 6061–TiB2 In–situ Metal Matrix Composite
|
|
2014 |
|
|
|
[197]
|
Corrosion and Tribological Studies of Bamboo Leaf Ash and Alumina Reinforced Al-Mg-Si Alloy Matrix Hybrid Composites in Chloride Medium
|
|
Int. J. Electrochem. Sci,
2014 |
|
|
|
[198]
|
SYNTHESIZING OF IN SITU FORMED Al TiB2 MMC INGOT ALLOWING TiB2 REINFORCEMENT PARTICLES TO GROW TO THE DESIRED SIZE WITH DESIRED …
|
|
2014 |
|
|
|
[199]
|
SYNTHESIZING OF IN SITU FORMED Al TiB2 MMC INGOT ALLOWING TiB2 REINFORCEMENT PARTICLES TO GROW TO THE DESIRED SIZE WITH …
|
|
2014 |
|
|
|
[200]
|
Development and Testing of Metal Matrix Composite by Reinforcement of Sic Particles on Al 5XXX Series Alloy
|
|
2014 |
|
|
|
[201]
|
Mechanical and machining properties analysis of Al6061-Cu-reinforced SiCP metal matrix composite
|
|
2014 |
|
|
|
[202]
|
采用响应面方法对原位反应铸造制备 Al/TiB_2 金属基复合材料工艺参数进行优化 (英文)
|
|
2013 |
|
|
|
[203]
|
采用响应面方法对原位反应铸造制备 Al/TiB2 金属基复合材料工艺参数进行优化 (英文)
|
|
中国有色金属学报: 英文版,
2013 |
|
|
|
[204]
|
Mechanical Properties and Corrosion Behaviour of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Bamboo Leaf Ash
|
|
Tribology in Industry,
2013 |
|
|
|
[205]
|
Structure and properties of hybrid composite materials
|
|
Russian Metallurgy (Metally),
2013 |
|
|
|
[206]
|
Effects of Heat Treatment on the Mechanical Properties of Al-4% Ti Alloy
|
|
International Journal of Metals,
2013 |
|
|
|
[207]
|
Studies on effect of heat treatment and water quench age hardening on microstructure, strength, abrasive wear behaviour of Al6061-MWCNT metal matrix composites
|
|
2013 |
|
|
|
[208]
|
Mechanical properties of Magnesium Inoculated 6063 Aluminium Alloy
|
|
2013 |
|
|
|
[209]
|
Design and performance of a compact subthermal neutron source for an Electron Linear Accelerator
|
|
Journal of Instrumentation,
2013 |
|
|
|
[210]
|
Optimization of process parameters for in situ casting of Al/TiB2 composites through response surface methodology
|
|
Transactions of Nonferrous Metals Society of China,
2013 |
|
|
|
[211]
|
Mechanical behaviour of Al-Mg-Si matrix composites reinforced with alumina and bamboo leaf ash
|
|
Metallurgical and Materials Engineering,
2013 |
|
|
|
[212]
|
Preparation and evaluation of mechanical properties of Al-6061 reinforced with graphite and fly ash of seed husk (Honge) particulate metal matrix composite
|
|
National Conference on Challenges in Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in Research & Technology in the Coming Decades,
2013 |
|
|
|
[213]
|
Investigations into Effect of Tool Wear on Surface Integrity in Dry Turning of Al6061
|
|
Advanced Materials Research,
2013 |
|
|
|
[214]
|
Fabrication characteristics and mechanical behaviour of rice husk ash–Alumina reinforced Al-Mg-Si alloy matrix hybrid composites
|
|
Journal of Materials Research and Technology,
2013 |
|
|
|
[215]
|
Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites
|
|
Journal of Materials Research and Technology,
2013 |
|
|
|
[216]
|
Influence of rice husk ash-silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
|
|
Tribology in industry,
2013 |
|
|
|
[217]
|
Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
|
|
Acta Technica Corviniensis-bulletin of engineering,
2013 |
|
|
|
[218]
|
Electrical discharge machining of Al-TiB2 with low-frequency vibrating tool
|
|
2013 |
|
|
|
[219]
|
Experimental Investigation of Effect of Gear Milling Parameters of Al-B4C Composite Gears on Surface Roughness
|
|
Advanced Materials Research,
2013 |
|
|
|
[220]
|
Структура и свойства гибридных композиционных материалов
|
|
2013 |
|
|
|
[221]
|
Influence of rice husk ash–silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
|
|
Tribology in industry,
2013 |
|
|
|
[222]
|
Influence of Heat Treatment on Strength and Abrasive Wear Behavior of Al6061–MWCNT Metal Matrix Composites
|
|
2012 |
|
|
|
[223]
|
Fabrication and Characterizations of Mechanical Properties of Al-4.5% Cu/10TiC Composite by In-Situ Method
|
|
Journal of Minerals and Materials Characterization and Engineering,
2012 |
|
|
|
[224]
|
Preparation and evaluation of mechanical and wear properties of 6061Al reinforced with graphite particulate metal matrix composite
|
|
Materials Science and Engineering (IJMMSE),
2012 |
|
|
|
[225]
|
Effect of Tool Wear on Tri-Phase CVD Coated Carbide Tools Life while Turning Al6061
|
|
Advanced Materials Research,
2012 |
|
|
|
[226]
|
Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
|
|
Scientia Iranica,
2012 |
|
|
|
[227]
|
Effect of Heat Treatment on the Microstructure and Hardening Properties of 6061Aluminum Alloy.
|
|
Journal of Applied Sciences Research,
2012 |
|
|
|
[228]
|
PREPARATION AND EVALUATION OF MECHANICAL AND WEAR PROPERTIES OF Al6061 REINFORCED WITH GRAPHITE AND SiC PARTICULATE METAL MATRIX COMPOSITES
|
|
International Journal of Mechanical Engineering and Robotics Research,
2012 |
|
|
|
[229]
|
Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
|
|
2012 |
|
|
|
[230]
|
Characteristic Study of the Al 6061 T-6 used in RTP Primary Cooling System Using Scanning Electron Microscope (SEM)
|
|
2011 |
|
|
|
[231]
|
Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2011 |
|
|
|
[232]
|
Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted synthesis
|
|
The International Journal of Advanced Manufacturing Technology,
2011 |
|
|
|
[233]
|
Effect of KBF4 and K2TiF6 on precipitation kinetics of TiB2 in aluminium matrix composite
|
|
Journal of Advance Material Letters,
2011 |
|
|
|
[234]
|
TRIBOLOGY IN BIOMATERIALS DESIGN AND SELECTION
|
|
12th International Conference on Tribology,
2011 |
|
|
|
[235]
|
Wear behavior and its correlation with mechanical properties of TiB2 reinforced aluminium-based composites
|
|
Advances in Tribology,
2011 |
|
|
|
[236]
|
Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted …
|
|
2011 |
|
|
|
[237]
|
Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties
|
|
2010 |
|
|
|
[238]
|
Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical …
|
|
|
|
|
|
[239]
|
Basınçlı döküm prosesinde iki farklı soğutma kanallı kalıpların döküm-kalıp arayüzey ısı transfer katsayısının nümerik olarak incelenmesi
|
|
|
|
|
|
[240]
|
CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR
|
|
|
|
|
|
[241]
|
An Experimental Study of the TiB2-Reinforced AA7075 Manufactured by the Stir Casting
|
|
|
|
|