Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"A Comparative Study on the Microstructures and Mechanical Properties of Al 6061 Alloy and the MMC Al 6061/TiB2/12p"
written by T.V. Christy, N. Murugan, S. Kumar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Mechanical behaviour of aluminium based metal matrix composites reinforced with aluminium oxide
[2] Effect of the Hardness in Al/TiB2 MMC with Sand Mould and Permanent Mould
Materials, Design and …, 2023
[3] Experimental investigation of wear properties of AA6061+ Al2O3 metal matrix composite fabricated by vacuum stir casting method
Materials Today: Proceedings, 2022
[4] On the low-cycle fatigue behavior of aluminum alloys under influence of tensile pre-strain histories and strain ratio
International Journal of …, 2022
[5] Investigation on Inorganic Salts K2TiF6 and KBF4 to Develop Nanoparticles Based TiB2 Reinforcement Aluminium Composites
Bioinorganic …, 2022
[6] Investigation on Corrosion Behaviour of Hybrid Aluminium Metal Matrix Composite Welded by Friction Stir Welding
Materials Today …, 2022
[7] Computational simulation of IC engine cooling using different materials for different shapes of fins: a comparative study
International Journal of Ambient …, 2022
[8] ANALISIS PENGARUH PARAMETER PEMESINAN, METODE PENYAYATAN DAN MATERIAL PISAU FRAIS TERHADAP KEKASARAN PERMUKAAN ALUMINIUM …
Jurnal Vokasi Mekanika …, 2022
[9] Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode
Advances in Materials …, 2022
[10] Effect of pin geometry and orientation on friction and wear behavior of nickel-coated EN8 steel pin and Al6061 alloy disc pair
advances in materials …, 2022
[11] An Investigation into the Effect of Vacuum Conditions on the Filling Analysis of the Pressure Casting Process
International Journal of Metalcasting, 2022
[12] Manufacturing of (Al–10Zn)/TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties
Materials Science and …, 2022
[13] Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing
Journal of Solid and Fluid …, 2022
[14] Investigation of the Mechanical Behavior of Synthesized Al6061/TiO2 Microcomposites Using an Innovative Stir Casting Method
Mawla… - Nanomaterials, 2022
[15] Optimization of 1U nanosatellite on the basis of strength and weight using different Materials: A numerical approach
Materials Today: Proceedings, 2022
[16] Effects of heat treatment on the surface quality and improvement in formability of deformation machined products of Al 6061
Journal of …, 2022
[17] Comparative Analysis and Optimization of Thermoelectric Machining of Alumina and Silicon Carbide-Reinforced Aluminum Metal Matrix Composites …
Journal of Advanced …, 2022
[18] Effects of sintering techniques and parameters on microstructure and mechanical properties of Al-15Si-2, 5Cu-0.5 Mg compacts and Al-15Si-2, 5Cu-0.5 Mg/B4C …
Materials Today Communications, 2022
[19] Effect of nitinol on mechanical properties of AA6061 metal matrix composite: A review
Materials Today …, 2021
[20] Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion
… of Experimental & …, 2021
[21] Wear Behavior of Al6061/TiO2 Composites Synthesized by Stir Casting Process
Journal of Advanced Engineering Trends, 2021
[22] DEVELOPMENT AND CHARACTERIZATION OF SUSTAINABLE NOVEL ALUMINUM METAL MATRIX COMPOSITES
2021
[23] Influence of reaction synthesis feedstocks on solidification defect formation and microstructure-property relationships in electron beam freeform fabrication of …
2021
[24] Recent progress in hybrid aluminum composite: manufacturing and application
Metals, 2021
[25] Friction stir welding of AA7075-T6/TiB2 in situ cast composites plates using scarf joint configuration
Advances in Materials and …, 2021
[26] Mechanical properties of titanium diboride particles reinforced aluminum alloy matrix composites: a comprehensive review
Advances in Materials …, 2021
[27] Research Summary on the Processing, Mechanical and Tribological Properties of Aluminium Matrix Composites as Effected by Fly Ash Reinforcement
Crystals, 2021
[28] Synthesis of graphene–aluminium matrix nanocomposites: mechanical and tribological properties
2021
[29] Study of Mechanical and Tribological Behavior of Aluminium Metal Matrix Composite Reinforced with Alumina
2021
[30] Production of Aluminum Matrix Composite Material by Active Carbon Additive
2021
[31] Taguchi Optimization for the Production of Optimized Sustainable Novel Aluminium MMC Using Squeeze Stir Casting Process
2021
[32] A Numerical and Experimental Investigation of the Thermal Behavior of a Permanent Metal Mold with a Conventional Cooling Channel and a New Cooling Channel …
2021
[33] Manufacturing of Al-Li-Si3N4 metal matrix composite for weight reduction
2021
[34] Characterization of physical and mechanical properties of aluminium based composites reinforced with titanium diboride particulates
2021
[35] TOZ METALURJİSİ YÖNTEMİ İLE A356 MATRİSLİ HİBRİT KOMPOZİT MALZEME ÜRETİMİ VE KARAKTERİZASYONU
2021
[36] Fabrication characteristics and mechanical behaviour of aluminium alloy reinforced with Al2O3 and coconut shell particles synthesized by stir casting
2021
[37] Investigation of Corrosion Characteristic of Al6063 Reinforced with Al2O3-CBA by Using Stir Casting
2021
[38] Effect of heat treatment and biosilica on mechanical, wear, and fatigue behavior of Al-T i B 2 in situ metal matrix composite
2021
[39] Particulate Mollusc Shells as Reinforcements for Aluminium Matrix Composites: A Review
2021
[40] Investigation of mechanical & corrosion properties of graphene, R-glass fiber reinforced Aluminium 2024 hybrid composites
2021
[41] Corrosion Behavior of Stir Cast Al6061-B4C/TiB2 Composites Processed by Post-Accumulative Roll Bonding
2021
[42] Effect of Heat Treatment on Microstructure and Hardness of Graphene Nanoplatelets Reinforced Al-Zn-Mg-Cu Alloy Composite
ASME …, 2021
[43] Mechanical Properties Investigation of Aluminium Silicon Carbide Hybrid Metal Matrix Composites (MMCs)
2020
[44] DEVELOPMENT AND CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR MACHINING WITH WEDM
2020
[45] ALUMINUM BASED HYBRID METAL MATRIX COMPOSITES: A REVIEW OF SELECTION PHILOSOPHY AND MECHANICAL PROPERTIES FOR ADVANCED APPLICATIONS
International Journal of Mechanical and Production Engineering Research and Developmen, 2020
[46] Development and Characterization of AI 6061 MoS2 MMC and optimization of process parameters for machining with WEDM
2020
[47] Processing, properties, and microstructure of recycled aluminum alloy composites produced through an optimized stir and squeeze casting processes
2020
[48] Tribological behaviour of aluminum alloy (AA7075) based hybrid composites
2020
[49] Mechanical and Tribological Characterizations of Al/TiB2 composites
2020
[50] Corrosion characterization of Al 6061/Red Mud MMCs in hydrochloric Acid
2020
[51] Enhancement of corrosion behaviour of AL6061-B4C-RHA reinforced hybrid composite
2020
[52] Experimental analysis of aluminium alloy LM25 with carbon in composite material
2020
[53] Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites
2020
[54] MECHANICAL PROPERTIES AND WEAR CHARACTERIZATION OF AA 6082 ALUMINUM USING INDUSTRIAL WASTE FLY ASH
2020
[55] Investigation of Production and Abrasive Wear Behavior of Functionally Graded TiB 2/Al and TiB 2/Al–4Cu Composites
2020
[56] Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid …
2020
[57] Effects of yttrium addition and aging on mechanical properties of AA2024 fabricated through multi-step stir casting
2020
[58] An Effect of EDM on AL6061-5% SiC as stir cast MMC
2020
[59] Investigation of production and abrasive wear behavior of functionally graded TiB2/Al and TiB2/Al–4Cu composites
Transactions of the Indian Institute of Metals, 2020
[60] Experimental investigation on the mechanical properties of LM6 aluminum alloy reinforced with boron carbide and titanium hybrid composites
2019
[61] An investigation on the Corrosion Behavior of Al (Mg-TiFe-SiC) Matrix Composite in Acidic and Chloride Media
2019
[62] DEVELOPMENT OF HIGH STRENGTH TO WEIGHT RATIO ALUMINIUM–MAGNESIUM ALLOY WITH ENHANCED CORROSION RESISTANCE
2019
[63] Tensile Behavior of Aluminium2014 Reinforced with Boron Carbide and Copper Coated Short Basalt Fiber Based Hybrid Composites
2019
[64] Development of aluminium 5056/SiC/bagasse ash hybrid composites using stir casting method
2019
[65] On the multi-parametric optimization of quality characteristics of the hybrid Al-6061 composites fabricated through powder metallurgy
2019
[66] Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
2019
[67] Effect of Heat Treatment on Hardness of Aluminium Alloy Reinforced with Rice Husk Ash
2019
[68] TAGUCHI METHOD PARAMETRIC OPTIMIZATION OF SURFACE ROUGHNESS AND MRR ON HPMMC IN CNC TURNING PHASE
… JOURNAL ENGINEERING AND …, 2019
[69] Surface Characteristics of Drilled Holes in Al–TiB2 Metal Matrix Composites Using Electric Discharge Machine
Advances in Manufacturing Processes, 2019
[70] Investigation of Erosion-Corrosion of Aluminium Alloy Composites: Influence of Slurry Composition and Speed in different mediums
2019
[71] Microstructures and mechanical properties of Ti/Al/Mg/Al/Ti laminates with various rolling reductions
2019
[72] Influence of fly ash on the microstructure and mechanical properties of AA6063 alloy using compocasting technique
2019
[73] Comparison of the Effects of B4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method
2019
[74] Titanium Diboride Reinforced Aluminium Metal Matrix Composites: A
2019
[75] STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES
2019
[76] ZnO nanoparticles impregnated polymer composite as superhydrophobic anti-corrosive coating for Aluminium-6061 alloy
2019
[77] A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
2019
[78] EXPERIMENTAL INVESTIGATION ON THE MECHANICAL PROPERTIES OF LM6 ALUMINUM ALLOY REINFORCED WITH BORON CARBIDE AND TITANIUM …
2019
[79] Investigation of High Stress Abrasive and Erosive Wear Behaviour of AA336/TiB2/SiC Ex Situ Composites
2019
[80] Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites
2019
[81] COMPOSITO DE MATRIZ DE ALUMINIO CON CENIZA DE BAGAZO DE CANA DE AZUCAR COMO MATERIAL DE REFUERZO
2019
[82] Aluminum Matrix Composite with Sugarcane Bagasse Ash as Reinforcement Material
2019
[83] Titanium diboride reinforced aluminum composite as a robust material for automobile applications
2019
[84] A review on mechanical and wear characteristics of particulate reinforced Al-alloy based MMC
2019
[85] Mechanical Behavioural Aspects of Al-356 Under the Influence of Boron Carbide and Magnesium
2019
[86] Effects of Reinforcement on Tribological Behaviour of Aluminium Matrix Composites
2019
[87] Optimization of dry sliding wear behaviour of AA6061 (as cast) and AA6061 (HT) aluminium alloy using design of experiment approach
2019
[88] An Investigation of the Mechanical Properties of HybridComposites in Applications of Automotive Industry
2019
[89] A Comparative Study on Sliding wear Behavior of Aluminum Alloy with B4C and SiC Reinforced Metal Matrix Composites
2018
[90] Approach to Determine the Temperature of Aluminum Alloy AL 6061 with Unknown Emissivity using Noncontact Technique
2018
[91] A Study on Mechanical Properties of Aluminum-4.5% Copper Alloy Metal Matrix Composites Reinforced with Alumina Fibers Using Squeeze Casting Process
2018
[92] MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE.
2018
[93] Thermal Analysis of Engine Cylinder in Al/TiB2 and Al/SiC Using ANSYS
2018
[94] COMBINED EFFECTS OF STIR CASTING AND IN-SITU TECHNIQUES IN THE PRODUCTION OF AL 6061-TIB2 METAL MATRIX COMPOSITE WITH …
International Journal of Mechanical Engineering and Technology (IJMET), 2018
[95] Dry-Sliding Wear Analysis of SiC Reinforced AA6063 As-Cast Aluminum Metal Matrix Composites
2018
[96] Effect of TiB2 particle addition on the mechanical properties of Al/TiB2 in situ formed metal matrix composites
2018
[97] Review on wear characteristics of aluminum silicon carbide reinforced with basalt fibre
2018
[98] Enhancing the Mechanical Properties of Metal Matrix Composite by Reinforcing Aluminium 6063 with Sic & Graphite
International Journal of Engineering Research & Technology, 2018
[99] Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Sugarcane Bagasse Ash
2018
[100] On the Formation and Distribution of In Situ Synthesized TiB2 Reinforcements in Cast Aluminium Matrix Composites
Journal of Composites Science, 2018
[101] Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Rice Husk Ash
2018
[102] Effect of ceramic reinforcement on mechanical properties of aluminum matrix composites produced by stir casting process
Materials Today: Proceedings, 2018
[103] A Comparative Study on Sliding wear Behavior of of Aluminum Alloy with B4C and SiC Reinforced Metal Matrix Composites
International Journal of Science, Engineering and Technology Research (IJSETR), 2018
[104] REINFORCEMENT AND HOT WORKABILITY OF ALUMINIUM ALLOY 7075 PARTICULATE COMPOSITES: A REVIEW
2018
[105] Aluminium Alloy Composites and its Machinability studies; A Review
Materials Today: Proceedings, 2018
[106] Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017), 2018
[107] Effect of matrix powder and reinforcement content on tribological behavior of particulate 6061Al-TiB2 composites
Journal of Composite Materials, 2018
[108] Comparative study of aluminium with SiC and TiB2 as reinforce particulate and with FEA
Materials Research Express, 2018
[109] An investigation on the tensile properties and micro-structure of hybrid metal matrix composites
International Journal of Materials and Product Technology, 2018
[110] A novel High-Entropy Alloy-based composite material
Journal of Alloys and Compounds, 2018
[111] A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5% COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING …
2018
[112] Investigation of Flexure Strength of Aluminum Composites Reinforced with Iron Fibers‎
2018
[113] Study on Mechanical Properties of Rice Husk Ash and Fly Ash Reinforcement in Aluminium (Al 6061) Metal Matrix Composites
2018
[114] Optimization of EDM Parameters for Al–TiC Composites Prepared through Powder Metallurgy Route
2018
[115] Design And Fabrication Of Fatigue Test Rig And Preliminary Investigation On Flax Composite Beam
Materials Today: Proceedings, 2018
[116] Mechanical Properties of Al 6061/TiB2 In-Situ Formed Metal Matrix Composites
Journal of Advanced Microscopy Research, 2018
[117] FRICTION-STIR INCREMENTAL SHEET FORMING OF ALUMINUM ALLOY AND METAL MATRIX COMPOSITE
2018
[118] A study on mechanical properties of aluminium-4.5% copper alloy metal matrix composites reinforced with alumina fibers using squeeze casting process
2018
[119] Combined effects of stir casting and in-situ techniques in the production of Al 6061-TiB2 metal matrix composite with different reaction holding times and its …
2018
[120] EVALUATION OF A356-B4C COMPOSITES FABRICATED THRU ULTRASONIC ASSISTED STIR CASTING TECHNIQUE
2018
[121] MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
2018
[122] MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE
2018
[123] Controlling factors in aluminum matrix composites fabrication
Anusandhan, 2018
[124] Processing of aluminium metal matrix composites-a review
Journal of …, 2017
[125] Fabrication of LM25/SiO2 Metal Matrix Composite and Optimization of Wear Process Parameters Using Design of Experiment.
Tribology in industry, 2017
[126] Desarrollo y caracterización de un material compuesto de matriz de aluminio
2017
[127] A COMPARATIVE STUDY ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY AND THE MMC
International Journal of Research Sciences and Advanced Engineering [IJRSAE], 2017
[128] EVALUTION OF MECHANICAL PROPERTIES OF ALUMINIUM/SILICON CARBIDE/FLY ASH BRAKE ROTOR
International Research Journal of Engineering and Technology, 2017
[129] Performance investigation of aluminum 6061 metal matrix composite
Advances in Natural and Applied Sciences, 2017
[130] Effective Hazard Control: An Imperative for Managing Health, Safety and Environmental Challenges of Construction Projects in Nigeria
Journal of Scientific and Engineering Research, 2017
[131] Effect of pouring temperature on A356-TiB2 MMCs cast in sand and permanent moulds by in-situ method
Journal of the Mechanical Behavior of Materials, 2017
[132] Wear behavior of Al-7% Si-0.3% Mg/melon shell ash particulate composites
2017
[133] Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite
International Journal of Machining and Machinability of Materials, 2017
[134] Effect of Particle Size on Mechanical Properties of Al-RMp Metal Matrix Composites
2017
[135] STUDIES ON MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF 1.2MG-0.70FE-0.40CU REINFORCED WITH GRAPHITE
International Journal oF Engineering Sciences &Management Research, 2017
[136] Investigation of Mechanical Properties on Aluminium Based Hybrid Composites
2017
[137] Effects of Precipitation Hardening on Mechanical Properties of Multistage Stirred Cast AA6063 Composites
2017
[138] Nanocomposites Mechanical and Tribological Properties Using Graphene-Coated-SiC Nanoparticles (GCSiCNP) for Light Weight Applications
Proceedings of the 3rd Pan American Materials Congress, 2017
[139] Failure Response of Simultaneously Pre-Stressed and Laser Irradiated Aluminum Alloys
Applied Sciences, 2017
[140] Effect of Applied Pressure on the Mechanical Properties of 6061 Aluminum Alloy Welded Joints Prepared by Friction Stir Welding
2017
[141] Fabrication of LM25/SiO 2 Metal Matrix Composite and Optimization of Wear Process Parameters Using Design of Experiment.
Tribology in Industry, 2017
[142] Effect of Heat Treatment on Mechanical and Wear Characterization of Coconut Shell Ash and E-glass Fiber Reinforced Aluminum Hybrid Composites
American Journal of Materials Science, 2016
[143] Konsolidacija aluminijskog praha
2016
[144] Study on Mechanical Properties and Microstructure of Aluminum Alloy 63401 Metal Matrix Composite Reinforced with Silicon Carbide Powder
2016
[145] Investigation of micro-structural and mechanical properties of metal matrix composite A359/B 4 C through electromagnetic stir casting
2016
[146] Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite
Transactions of the Indian Institute of Metals, 2016
[147] MULTI-OBJECTIVE OPTIMIZATION OF TRIBOLOGICAL PARAMETERS OF HYBRID COMPOSITES USING GREY RELATIONAL ANALYSIS
Int. J. Chem. Sci., 2016
[148] Fabrication, Reinforcement and Characterization of Metal Matrix Composites (MMCs) using Rice Husk Ash and Aluminium Alloy (A-356.2)
International Journal of Scientific & Engineering Research, 2016
[149] Experimental Evaluation of Process Parameters Effect on Mechanical and Machining Properties of Al6061–Cu–SiCp-Reinforced Metal Matrix Composite
Arabian Journal for Science and Engineering, 2016
[150] TRIBOLOGICAL PERFORMANCE OPTIMIZATION OF STIR-CAST AL-TIB^ sub 2^ METAL MATRIX COMPOSITES USING TAGUCHI-BASED GREY RELATION ANALYSIS
Journal of Manufacturing Technology Research, 2016
[151] Study on Mechanical Properties of AMCs produced by Stir Casting Method
KSMPE Autumn Conference 2016, 2016
[152] The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al 2 O 3+ SiC/Al6061 Hybrid Composites
2016
[153] Wear behavior of aluminum matrix hybrid composites fabricated through friction stir welding process
Journal of Iron and Steel Research, International, 2016
[154] In-situ synthesis of aluminum-titanium diboride metal matrix hybrid nanocomposite
ProQuest Dissertations Publishing, 2016
[155] The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al2O3+ SiC/Al6061 Hybrid Composites
2016
[156] Synthesis and characterization of TiB 2 reinforced aluminium matrix composites: a review
2016
[157] Investigation of micro-structural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting
2016 - NISCAIR-CSIR, 2016
[158] TRIBOLOGICAL PERFORMANCE OPTIMIZATION OF STIR-CAST AL-TIB^ sub 2^ METAL MATRIX COMPOSITES USING TAGUCHI-BASED GREY RELATION …
2016
[159] Stir casting of in–situ Al 6061 TiB2 metal matrix composite synthesized with different reaction holding times
Int. J. Eng. Res. Technol, 2015
[160] A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs)
2015
[161] Determination of Warm Working Temperature Range for In Situ Al m–TiB 2p Composite
2015
[162] MECHANICAL PROPERTIES OF LEAF ASHES REINFORCED ALUMINUM ALLOY METAL MATRIX COMPOSITES
International Journal of Applied Engineering Research, 2015
[163] THERMAL IMAGING-ASSIST HAND
2015
[164] Design and Fabrication of a Stir Casting Furnace Set-Up
Int. Journal of Engineering Research and Applications, 2015
[165] Razvoj titan-magnezij kompozita za biomedicinsku primjenu
2015
[166] Thermal and Electrical Transport Measurements in Metals
2015
[167] Stir Casting of in-situ Al 6061TiB2 Metal Matrix Composite Synthesized with Different Reaction Holding Times
International Journal of Engineering Research & Technology, 2015
[168] Comparative Analysis of Al/TiB2 Metal Matrix Composites in Different Mould Conditions
Journal of Advanced Microscopy Research, 2015
[169] Thermal and Electrical Transport Measurements in Wrought and Cast Aluminum Alloys
2015
[170] Characterization of hybrid aluminum matrix composites for advanced applications–A review
Journal of Materials Research and Technology, 2015
[171] A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs).
International Journal of Scientific & Engineering Research, 2015
[172] Al 6061-TiB 2 Metal Matrix Composite Synthesized with Different Reaction Holding Times by In-Situ Method
International Journal of Composite Materials, 2015
[173] Study on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting Method
Applied Mechanics and Materials, 2015
[174] Modeling and analysis of process parameters on metal removal rate (MRR) in machining of aluminium titanium diboride (Al-TiB2) composite
Multidiscipline Modeling in Materials and Structures, 2015
[175] Hardness and Wear Characteristics of Hybrid Aluminium Metal Matrix Composites Produced by Stir Casting Technique
Materials Today: Proceedings, 2015
[176] Synthesis and Characterization of TiB2 Reinforced Aluminium Matrix Composites: A Review
Journal of The Institution of Engineers (India): Series D, 2015
[177] Optimization of process parameters during machining of thixoformed A356-5TiB 2 in-situ composite using Design of Experiments
2015
[178] Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites
2015
[179] LOAN PERFORMANCE IN SELECTED INDIAN PUBLIC SECTOR BANKS - A COMPARATIVE STUDY
International Journal of Engineering Sciences & Management Research, 2015
[180] Ageing behavior of aluminum hybrid metal matrix composites
2014
[181] EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU REINFORCED SiCP METAL MATRIX COMPOSITES
2014
[182] Ultrasound assisted low-temperature synthesis of TiB2 and Al3Ti particulates in molten aluminum
2014
[183] Ultrasonic Fatigue Endurance of Aluminum Alloy AISI 6061-T6 on Pre-corroded and Non-corroded Specimens
Metallurgical and Materials Transactions A, 2014
[184] Overview of Aluminium Matrix Composites for Automotive Applications
International Journal of Applied Engineering Research, 2014
[185] An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites
Procedia Engineering, 2014
[186] Combined Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of Al-Ti Alloy
International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 2014
[187] Hybrid Aluminium Metal Matrix Composite Reinforced with SiC and TiB2
Procedia Engineering, 2014
[188] Production characterization and friction stir welding of aluminum 6061 matrix composite reinforced with boron carbide
2014
[189] Production characterization and friction stir welding of aa6061zrb2 in situ composites
2014
[190] Determination of Warm Working Temperature Range for In Situ Alm–TiB2p Composite
Journal of The Institution of Engineers (India): Series D, 2014
[191] Development and testing of Al5083 alloy reinforced by SiC particles
2014
[192] Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC P Metal Matrix Composite
Journal of Minerals and Materials Characterization and Engineering, 2014
[193] Microstructure and Mechanical Behaviour of Stir-Cast Al-Mg-Sl Alloy Matrix Hybrid Composite Reinforced with Corn Cob Ash and Silicon Carbide
2014
[194] Comparative Study of Composites Reinforced With SiC and TiB2
Procedia Engineering, 2014
[195] Effects of Reinforced Particulates on Properties of Aluminium Metal Matrix Composite
2014
[196] Production and Characterization of Al 6061–TiB2 In–situ Metal Matrix Composite
2014
[197] Corrosion and Tribological Studies of Bamboo Leaf Ash and Alumina Reinforced Al-Mg-Si Alloy Matrix Hybrid Composites in Chloride Medium
Int. J. Electrochem. Sci, 2014
[198] SYNTHESIZING OF IN SITU FORMED Al TiB2 MMC INGOT ALLOWING TiB2 REINFORCEMENT PARTICLES TO GROW TO THE DESIRED SIZE WITH DESIRED …
2014
[199] SYNTHESIZING OF IN SITU FORMED Al TiB2 MMC INGOT ALLOWING TiB2 REINFORCEMENT PARTICLES TO GROW TO THE DESIRED SIZE WITH …
2014
[200] Development and Testing of Metal Matrix Composite by Reinforcement of Sic Particles on Al 5XXX Series Alloy
2014
[201] Mechanical and machining properties analysis of Al6061-Cu-reinforced SiCP metal matrix composite
2014
[202] 采用响应面方法对原位反应铸造制备 Al/TiB_2 金属基复合材料工艺参数进行优化 (英文)
2013
[203] 采用响应面方法对原位反应铸造制备 Al/TiB2 金属基复合材料工艺参数进行优化 (英文)
中国有色金属学报: 英文版, 2013
[204] Mechanical Properties and Corrosion Behaviour of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Bamboo Leaf Ash
Tribology in Industry, 2013
[205] Structure and properties of hybrid composite materials
Russian Metallurgy (Metally), 2013
[206] Effects of Heat Treatment on the Mechanical Properties of Al-4% Ti Alloy
International Journal of Metals, 2013
[207] Studies on effect of heat treatment and water quench age hardening on microstructure, strength, abrasive wear behaviour of Al6061-MWCNT metal matrix composites
2013
[208] Mechanical properties of Magnesium Inoculated 6063 Aluminium Alloy
2013
[209] Design and performance of a compact subthermal neutron source for an Electron Linear Accelerator
Journal of Instrumentation, 2013
[210] Optimization of process parameters for in situ casting of Al/TiB2 composites through response surface methodology
Transactions of Nonferrous Metals Society of China, 2013
[211] Mechanical behaviour of Al-Mg-Si matrix composites reinforced with alumina and bamboo leaf ash
Metallurgical and Materials Engineering, 2013
[212] Preparation and evaluation of mechanical properties of Al-6061 reinforced with graphite and fly ash of seed husk (Honge) particulate metal matrix composite
National Conference on Challenges in Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in Research & Technology in the Coming Decades, 2013
[213] Investigations into Effect of Tool Wear on Surface Integrity in Dry Turning of Al6061
Advanced Materials Research, 2013
[214] Fabrication characteristics and mechanical behaviour of rice husk ash–Alumina reinforced Al-Mg-Si alloy matrix hybrid composites
Journal of Materials Research and Technology, 2013
[215] Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites
Journal of Materials Research and Technology, 2013
[216] Influence of rice husk ash-silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
Tribology in industry, 2013
[217] Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
Acta Technica Corviniensis-bulletin of engineering, 2013
[218] Electrical discharge machining of Al-TiB2 with low-frequency vibrating tool
2013
[219] Experimental Investigation of Effect of Gear Milling Parameters of Al-B4C Composite Gears on Surface Roughness
Advanced Materials Research, 2013
[220] Структура и свойства гибридных композиционных материалов
2013
[221] Influence of rice husk ash–silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
Tribology in industry, 2013
[222] Influence of Heat Treatment on Strength and Abrasive Wear Behavior of Al6061–MWCNT Metal Matrix Composites
2012
[223] Fabrication and Characterizations of Mechanical Properties of Al-4.5% Cu/10TiC Composite by In-Situ Method
Journal of Minerals and Materials Characterization and Engineering, 2012
[224] Preparation and evaluation of mechanical and wear properties of 6061Al reinforced with graphite particulate metal matrix composite
Materials Science and Engineering (IJMMSE), 2012
[225] Effect of Tool Wear on Tri-Phase CVD Coated Carbide Tools Life while Turning Al6061
Advanced Materials Research, 2012
[226] Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
Scientia Iranica, 2012
[227] Effect of Heat Treatment on the Microstructure and Hardening Properties of 6061Aluminum Alloy.
Journal of Applied Sciences Research, 2012
[228] PREPARATION AND EVALUATION OF MECHANICAL AND WEAR PROPERTIES OF Al6061 REINFORCED WITH GRAPHITE AND SiC PARTICULATE METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Robotics Research, 2012
[229] Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
2012
[230] Characteristic Study of the Al 6061 T-6 used in RTP Primary Cooling System Using Scanning Electron Microscope (SEM)
2011
[231] Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites
Journal of Minerals and Materials Characterization and Engineering, 2011
[232] Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted synthesis
The International Journal of Advanced Manufacturing Technology, 2011
[233] Effect of KBF4 and K2TiF6 on precipitation kinetics of TiB2 in aluminium matrix composite
Journal of Advance Material Letters, 2011
[234] TRIBOLOGY IN BIOMATERIALS DESIGN AND SELECTION
12th International Conference on Tribology, 2011
[235] Wear behavior and its correlation with mechanical properties of TiB2 reinforced aluminium-based composites
Advances in Tribology, 2011
[236] Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted …
2011
[237] Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties
2010
[238] Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical …
[239] Basınçlı döküm prosesinde iki farklı soğutma kanallı kalıpların döküm-kalıp arayüzey ısı transfer katsayısının nümerik olarak incelenmesi
[240] CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR
[241] An Experimental Study of the TiB2-Reinforced AA7075 Manufactured by the Stir Casting
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top