Author(s)

Derek Ajesam Asoh^1,2,3*, Brice Damien Noumsi⁴, Edwin Nyuysever Mbinkar¹

¹Laboratoire de Génie Electrique, Mécatronique et Traitement du Signal, ENSPY, University of Yaounde I, Yaounde, Cameroon.
²Department of Electrical/Electronic Engineering, NAHPI, University of Bamenda, Bamenda, Cameroon.
³Higher Technical Teacher Training College (HTTTC), University of Bamenda, Bamenda, Cameroon.
⁴Department of Electrical/Electronics Engineering, Nigeria Army College of Environmental Studies and Technology (NACEST), Makurdi, Nigeria.

Maximum Power Point Tracking (MPPT) is an important process in Photovoltaic (PV) systems because of the need to extract maximum power from PV panels used in these systems. Without the ability to track and have PV panels operate at its maximum power point (MPP) entails power losses; resulting in high cost since more panels will be required to provide specified energy needs. To achieve high efficiency and low cost, MPPT has therefore become an imperative in PV systems. In this study, an MPP tracker is modeled using the IC algorithm and its behavior under rapidly changing environmental conditions of temperature and irradiation levels is investigated. This algorithm, based on knowledge of the variation of the conductance of PV cells and the operating point with respect to the voltage and current of the panel calculates the slope of the power characteristics to determine the MPP as the peak of the curve. A simple circuit model of the DC-DC boost converter connected to a PV panel is used in the simulation; and the output of the boost converter is fed through a 3-phase inverter to an electricity grid. The model was simulated and tested using MATLAB/Simulink. Simulation results show the effectiveness of the IC algorithm for tracking the MPP in PV systems operating under rapidly changing temperatures and irradiations with a settling time of 2 seconds.

Modeling, Simulation, PV System, Maximum Power Point Tracking (MPPT), Incremental Conductance Algorithm, MATLAB/Simulink

Asoh, D. , Noumsi, B. and Mbinkar, E. (2022) Maximum Power Point Tracking Using the Incremental Conductance Algorithm for PV Systems Operating in Rapidly Changing Environmental Conditions. Smart Grid and Renewable Energy, 13, 89-108. doi: 10.4236/sgre.2022.135006.