I. A. Andreeva, V. B. Bagratashvili, L. P. Ichkitidze, V. M. Podgaetsky, O. V. Ponomareva, V. S. Savranskii and S. V. Selishchev, “Determination of Mechanical Properties of Biocompatible Three-Dimensional Nanocomposites Manufactured Using Laser Methods,” Biomedical Engineering, Vol. 43, No. 6, 2009, pp. 241-248.doi:10.1007/s10527-010-9134-4

has been cited by the following article:

• TITLE: Bulk Composite Nanomaterial with Multiwall Carbon Nanotubes

  AUTHORS: Levan Ichkitidze, Vitally Podgaetsky, Alexander Prihodko, Sergei Selishchev, Eugenie Blagov, Vyacheslav Galperin, Yuri Shaman, Lyudmila Tabulina

  KEYWORDS: Carbon Nanotubes; Functionalization; Albumine; Biocompatible Composite Nanomaterial

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.10, October 22, 2012

  ABSTRACT: The properties of the composite nanomaterials (CNM) based on bovine serum albumin (BSA) and multi-walled carbon nanotubes (MWCNT), both functionalized and non-functionalized, were investigated. In order to obtain the solid-state bulk CNM from the ultradispersed aqueous solutions of 25 wt.% BSA and (0.0015 - 0.04) wt.% MWCNT, the methods of nanotechnology and laser technology were used. It is revealed that the CNM density is 10% - 20% higher than that of water and the hardness is higher than that of BSA by a factor of 3 - 6 times. An increase in hardness Hv (by Vickers) of CNM correlated with an increase in the concentration of MWCNT, and Hyreached ~300 MPa for the case of the non-functionalized MWCNT, while for the case of the functionalized MWCNT, i.e. MWCNTf, Hy was 25% lower.