^{1}

^{*}

^{1}

^{2}

In this study, we demonstrate the correctness of our 2010 hypothesis regarding the need to complete Coulomb’s
*F*
_{C} law with the term ln
*r*, resulting in the completed
*F*
_{CC} force. For this purpose, we consider the electrical interactions between charged microparticles (MPs), which develop as fundamental vibrations (FVs) in ether, producing the vibrational strains
ε and
γ and the resulting stresses
σ and
τ, as percussions of ether cells (ECs) upon the MP surface. The stresses σ
and τ produce a resultant force
*F*
_{P}, due to the percussions which constitute the real electric force
*F*
_{CC}. The spatial effect of ether on
*F*
_{P} is demonstrated by an analytical method, considering the electrical interaction between MPs through various equidistant spatial paths
*l*
_{i} of FVs, modelled on the basis of the Huygens principle for waves. For this issue, we utilized a numerical calculation, which could be generalized. But this spatial effect of the ether leads at a very slow decreasing of the
*F*
_{P} forces ratio
*r*
_{F} when doubling the distance
*l*, in contrast to Coulomb’s
*F*
_{C} forces whose ratio
*r*
_{F} decreases accentuate with doubling
* l*. Accordingly, the necessity of including the term ln
*r* in the
*F*
_{CC} force, which is limited to 1.0 for doubling
* l*, at long distances, was justified.

The HM16 ether model, originally proposed by the present authors in 2016 [

We consider in our HM16 model that in nature, all microparticles (MPs) have either a positive or a negative electric charge, denoted MP^{+} and MP^{−}. However, in the general case in which the MP sign (+ or −) is not important, we will utilize the simple notation MP in the text, for both MP^{+} and MP^{−}. In addition, it is accepted in physics that at the macro scale, MP^{+} and MP^{−} are in parity, or even in pairs, and matter is neutral in nature.

To date, in physics, the nature of positive +q and negative −q electric charges has been neither defined nor explained. Furthermore, it has not been justified physically and materially.

In the following sections, we will initially present the modelling of the physical nature of the electric charge by highlighting new properties of the HM16 model of ether and of MPs, related to electric charges.

The paper brings in some novelties, such as the mechanical percussion nature of corrected electric forces F_{CC}, or the many simultaneous paths in ether of electric force F_{CC} transmission from close to closer distances, in contrast to the classical Coulomb force F_{C} transmitted at a distance.

The main new contribution of the paper is the analytical demonstration that the F_{CC} forces decrease very slow with the distance l, thus justifying the new term lnr, in contrast to the classical Coulomb force F_{C} which decreases with distance.

But this spatial effect of the ether leads at a limit to 1.0 in the decrease of the F_{P} forces ratio when doubling the distance l, in contrast to Coulomb’s F_{C} forces whose ratio decreases to 0.25 with doubling l.

Accordingly, the necessity of including the term lnr in the F_{CC} force, which too is capped to 1.0 for doubling l, at long distances, was demonstrated.

In all the following graphical representations of space filled with ether, we will also indicate the indispensable reference frame (RF), usually as a Cartesian Oxyz frame, attached to a certain MP immovable in ether or to a certain cell of the ether (EC). Hence any Oxyz frame will be an absolute RF, referring to the ether.

Since we admit that the electric charge is intimately linked to MPs, the electric charge can be explained by the composition and functioning of MPs in the HM16 ether model.

In the following analysis, we will utilize the same abbreviations used in [

HM16 is our ether model initiated in 2016, MP stands for microparticle, SMP for submicroparticle, ESMP for a especial submicroparticle, RF for the reference frame, EC for ether cells, EP for etheron particles, FV for fundamental vibrations in ether, PV for particle vibrations, MB for a material body, F_{CC} for the corrected/completed Coulomb force, F_{C} for the classical Coulomb electric force, p_{i} for individual percussion forces, f_{i} for continue force from percussions, F_{P} for the resultant percussion force, F_{N} for the classical Newtonian gravitational force, F_{DC} for the force between two electrical dipoles, r_{F} for F_{s} forces ratio at doubled distances, ε and γ for linear and angular deformations/strains and σ and τ for normal and tangential efforts/stresses;

An MP which is currently considered electrically neutral, such as a neutron, in fact comprises the MPs (or submicroparticles (SMPs)) MP^{+} and MP^{−}, with compensatory positive (+q) and negative (−q) electric charges, resulting in the common neutral bodies. In the following text, charge refers only to electric charge.

A first variant of the mode of operation of MPs considers the Type A HM16 ether model in terms of the crystalline disposition of etherons, as defined in [

A second variant of MPs’ mode of operation is given by the Type B HM16 model of ether, in the form of a fluid as defined in [

The Type A HM16 ether model is the main focus of the present analysis.

Of course, the detailed mechanisms developed between ether components and the forces acting between MPs, which will be presented and utilized in the next part of this paper, are only hypothesized, because until now it has not been possible to observe or directly measure them at their very small scale.

However, our HM16 ether model and its functioning is based on, and is in agreement with, actual existing experimental data from physics concerning the behaviour of matter and radiation at an observable scale.

Any such hypothesis will be confirmed in physics, when the results correspond to the real behaviour of matter and to the structure/composition of radiation at an observable scale.

Furthermore, as the purpose of this study, we will show that the results yielded by our HM16B model will be in accordance with the results of physical experiments. Accordingly, our initial hypothesis concerning the HM16 ether model will be confirmed.

It should be noted, as in [

Ether is considered to be in its natural, undisturbed state, thus presenting no deformations/displacements but containing the fundamental vibrations (FVs) induced by all existing MPs, which are considered immobile/fixed in space at the starting moment of any analysis.

We acknowledge that the MPs in ether constitute physical support for the electric charges +q and −q and we refer to them as MP^{+} and MP^{−} respectively.

Firstly, in the HM16 ether model, any MP^{+} or MP^{−} contains a group of vibrating EPs or ECs exhibiting their own PV^{+} or PV^{−} vibrations, with their specific sign pattern (+/−) and with their own frequency ω, where PV signifies an internal particle vibration (

Furthermore, the different actions of PV^{+} and PV^{−} produced by MP^{+} and MP^{−} respectively, create corresponding FVs in the surrounding ether, i.e. FV^{+} and FV^{−}.

Any MP1 will produce its own FVs in ether, which travel away from the MP1 (

We should state that, similarly to the claims made in section III of [

In the present analysis, we will discuss only the plane problem of deformations or of the strains ε and γ. Although in the general analysis of the HM16 ether model we are dealing with a spatial problem, in which the plane deformations ε and γ are replaced by the three-dimensional spatial tensors of deformations ε and γ, this does not diminish the utility of studying the plane problem, which can then be generalized.

These vibrations in ether FV^{+} and FV^{−} will create the effect and mode of interaction between MPs, as the electrical forces, which are specific to MP^{+} and different to MP^{−} (

This difference in the behaviour of MP^{+} and MP^{−} may, in principle, be manifested by the sense of the ε deformation (elongation +ε or compression −ε) and by the sense of the γ rotation (clockwise +γ or anticlockwise −γ), which are deformations produced in the ether’s spatial net of ECs, under the effect of FV^{+} and FV^{−} as created by MP^{+} or MP^{−}.

This specific behaviour of MP^{+} or MP^{−} is illustrated in ^{+} and MP^{−} disposed in opposition on a principal diagonal D1, i.e. in the two opposing quadrants of a Cartesian Oxyz reference system.

There, MP^{+} manifests its own vibrations PV^{+}, with a frequency ν (or pulsation ω) consisting of strain couples +ε and +γ along +D1, and similarly MP^{−} manifests its own PV^{−} consisting of the strain couples +ε and −γ along +D1 (or couples −ε and +γ along D1) (

Then, MPs in contact with surrounding ECs will transmit and create FVs, via their own PVs.

The FVs in the ether are also of two types: FV^{+} representing strain couples with the same sign (+ε and +γ or −ε and −γ) and FV^{−} representing strain pairs with opposite sign (+ε and −γ or −ε and +γ).

Accordingly, in the HM16 ether model, the specific properties of electric charges +q and −q are intrinsically attached to MP^{+} and to MP^{−} by their specific mode of vibration PV^{+} or PV^{−} manifested mechanically.

The detailed mechanics of PVs (as oscillations, vortexes or other kinds of movements) is not yet known, but it is not strictly necessary here.

Concerning the mechanism of the transmission of vibrations of the electrical force F_{CC} between electrically charged MPs via the ether, we advance here a hypothesis regarding the manifestation and continuous action of percussion forces p_{i} between the involved physical objects considered to be in direct contact (MPs, ECs), in which force transmissions are produced from close to closer distances (and not at a distance), as will be presented in the next section of this paper.

If an MP1 is present at a point in the ether and an MP2 is found in the area (

This contact action appears because the vibrating ECs of ether, around MP2, have direct contact with the MP2 surface and as such will create normal stresses σ (two−way stresses, i.e. −σ compression and +σ stretching) and tangential stresses τ (with two senses +τ and −τ) over the entire surface of the MP2 (

In HM16, FVs caused by an MP^{+} will create vectors (tensors in 3D) of the stresses σ and τ (or of the resultant force f) on the unit surface of an MP, disposed in the opposite directions to the σ and τ stresses (or force f) caused on the same MP unit surface by an MP^{−}.

Adding the two types of stress vectors (tensors) σ and τ (or the resultant f) upon the whole surface of an MP will result in a +F force of attraction or a −F force of repulsion (

Accordingly, in HM16, in the presence of MP^{+} (^{−} surface, will have opposite senses, resulting in an attraction force +F on this MP^{−}, while the same +F force will be simultaneously applied to the MP^{+}.

Regarding the resultant force caused by vibrational waves starting from two MPs of the same sign (MP^{+} and MP^{+} or MP^{−} and MP^{−}), the vectors of the strains ε and γ and the vectors of the stresses σ and τ (or resultant f) will have the same senses (^{+}/MP^{−}), while the same repulsive force −F will appear on the first MP at the same time.

Consequently, the difference in the behaviour of interactions between MP^{−} and MP^{+} is manifested according to the above presentation.

However, it is possible that between MPs of the same sign, attraction forces arise (and between the MPs of opposite signs, repulsion forces appear) according to the completed law of F_{CC} force [_{i} between the MPs or between the material bodies (MBs).

However, these interaction forces, having the opposite sense to those usually currently considered, will not change the physical behaviour of the MPs, which possess a property equivalent to the actual sign of the electric charge.

The above presentation can be considered to be the mechanism of the appearance and manifestation of electric charges +q and −q. They are, in fact, intrinsic properties of MPs and of the ether.

MPs^{+} and MPs^{−} produce in ether some specific FV^{+} or FV^{−} which acts upon other MPs^{−} and MPs^{+}. Depending on these FVs, the interaction force F_{CC} results between MPs.

Today, in physics, the Coulomb force F_{C} is considered to be a manifestation of interaction at distance between the so-called electric charges +q and −q. However, these charges do not exist as physical entities, only as manifestations of specific vibrations of MPs and of the HM16 ether model (

Note that the sense of the F_{DC} force between two electric dipoles will always be attraction [_{DC} via the corrected F_{CC} force given in Euation (21) in [

To the best of our knowledge, in no classical analysis of electricity [_{C} could, in fact, be the result of the unitary forces σ or τ, which might act on the surface of MPs due to ε or γ deformations of the ether.

We note that in the classical approach, considering the Coulomb electric interaction between two MBs or MPs endowed with electric charges ±q, only the existence of concentrated F_{C} forces of the Coulomb type are acknowledged.

It is also classically understood that F_{C} forces appear and act at a distance instantly and mutually between MB1 and MB2, with the sense of the action provided by the electric charge signs ±q. The F_{C} force is considered to be a linear, one-directional vector, which is transmitted directly on a straight line between MB1 and MB2.

We observe that, similar to the case of the electric force, in the case of Newtonian gravitational interaction, the gravitational force F_{N} is classically considered to act between two MBs. It is acknowledged that the force F_{N} is also a focused force, the size of which is a function of the masses m of the bodies and of the distance 1/r^{2} [

However, in our analysis of the presence of HM16 ether, we consider that the cause of F_{C} forces is the appearance of the unitary stresses σ and τ acting on the entire surface of an MP2 (

In this case, in the presence of HM16 FVs in the ether, they neither occur nor are transmitted between MP1 and MP2 in the form of a single straight vector of the F_{C} type. In fact, these fundamental waves/FVs are transmitted in the form of a spatial phenomenon, which is present around any MP in the form of spatial vibrations/waves advancing from MP1 in all directions in space at a speed c_{f} (_{i} and continuing according to the Huygens principle into the whole ether present in the whole of space, which in this case is considered to be Euclidean space.

Moreover, the classical transmission of F_{C} as a linear vector from MP1 directly to the destination (MP2) cannot occur, because it is highly likely that the F_{C} straight line will encounter another MP, or even several MPs, existing in any MBs. Furthermore, such a classical type straightforward F_{C} force in the form of a straight line (linear vector) cannot bypass an obstacle, or even an MP. As a result of bypassing an MB, the F_{C} force can no longer be considered to be a linear vector or a straight line.

Due to the above situation, the spatial transmission of F_{CC} in the form of spatial FVs, in terms of ether volume, prompts an additional argument.

In fact, the ε and γ deformations of the ether acting on MP2 are caused by the corresponding MP1 itself. Furthermore, MP1 is in an area of the ether where a quantity of energy (ΔE) has accumulated, which is manifested in the production of its own PVs as vortexes/oscillations in the EC group in the volume of the MP1 (Figures 1-3).

These PV vibrations in the EC group constituting the MP1 may in fact be periodic deformations (or even rotations/whirlpools) inside these ECs from MP1, of type ε_{p} and γ_{p} and with frequency ω (Figures 1-3). They are similar to the two types of specific deformations in compact MBs, known in mechanics as ε_{m} and γ_{m}. However, ε_{p} and γ_{p} do not transmit energy like ε_{m} and γ_{m}, owing to the ether’s special (ideal) properties.

Meanwhile, MP1, by being in intimate contact with ether, precisely conveys its vibrations to it as ε_{p} and γ_{p} deformations, which will create periodic ε and γ deformations in the ECs of the adjacent ether (_{p} and γ_{p} from the MP, but they will have their own preserved frequency ω across the entire network of the surrounding ECs.

It follows that these ε and γ deformations in the whole EC network are continuously present over time, as long as there exists an MP1 at their origin and no energy consumption/transmission is involved. In addition, these ε and γ deformations in ether can only be transmitted from near to near in the whole three-dimensional ether network, with a fundamental speed c_{f} given by ether’s physical properties. These properties are currently unknown, but we only can suppose they are the properties of an ideal body having an extremely high modulus E and an extremely low density ρ, consequently resulting in a wave speed c_{f} that is extremely high, in our estimate.

At the same time, it is likely that in the fixed ether cell/particle (EC/EP) network, ε and γ deformations can only be produced in quantum terms, by altering the positions of ECs/EPs in the ether only in jumps of Δx, Δy and Δz. These jumps can only take place between fixed EC/EP positions in the primary ether network (

Such a primary network is considered to be fixed, with stable EC positions in space, including in the fixed Oxyz reference frame (

Now, we consider such an etheric network with a given point P2, situated upon an MP2 surface (

The P2 terminus point of the FVs’ vibration paths can only be located at the point of contact of FV1 with an MP2 surface. For the MP2, the effect of the ε and γ(ω) deformations in the surrounding ether will be manifested by the MP2’s own EC deformations, i.e., ε_{p} and γ_{p}. These deformations imply a modification of the stress distribution σ, τ on the surface of the MP2, resulting in the F_{P} type of interaction force described in Section 4, as a result of these stresses. Note that this F_{P} force is the effect of FV1 through σ and τ, appearing on the entire outer surface of the MP2.

However, if the point P3 is located anywhere in the ether network in an area in which there is no MP (

Meanwhile, at the P3 point, which is not a terminus point, the continuation of the waveform path of FVs and the ε and γ(ω) deformations of ether can be pursued according to the Huygens principle, which also applies to ether, as shown in Section 5.

This is because the ether constitutes a special, albeit material, structure, present in all space, so that anywhere there is a P3 free point, where an FV1 arrives, the Huygens principle of waves can be applied [

However, if at the point P3 a second vibration FV2 arrives concomitantly with FV1, the travel direction of which makes an angle α with the direction of FV1 (

The FVs produced by all other MPs in the ether of the universe, including those of MP1 (Figures 1-3), act upon MP2.

Any of these FVs must be considered to act on the point P2 on the surface S of MP2, via the strains ε(ω) and γ(ω), which create the stresses σ and τ (_{i}) upon MP2.

We can consider the plane problem further, even though the stress phenomenon occurs in space (

In fact, on the entire outer surface S of MP2, there will be variations in stresses σ and τ, due to the differences in strains ε(ω) and γ(ω), which are precisely created on the surface S of MP2 by the action of the FVs of the ether produced by MP1.

We can consider the action of any FV waves on PM2, by exerting small percussions p_{i} with the FV frequency(pulsation) ν(ω) (_{i} are the results of the variations in the stresses σ and τ produced by any vibrating ECs, due to the FVs of the ether, consisting of the deformations ε(ω) and γ(ω) with frequency/pulsation ν/ω of the FVs.

However, we consider that the small percussions p_{i} of an EC, act with the frequency ν of the FVs (_{i} will act ν times per second, and so the percussions p_{i}, which are discrete in time, will result in a continuous equivalent force f_{i} of an EC, given by the equation

p i = 1 ν f i (0)

Physically, the magnitude of the percussion force p_{i} will be given by the square of the amplitude (A_{m})^{2} of the displacement of the EC of the ether, at the time of the EC collision with MP2 (_{i} will also depend on the distance l between MP1 and MP2, with a physically justifiable variation, along with the inverse of the square of the distance l^{2}, as in Coulomb’s F_{C} force Equation (1) in [

p i = k e ( A m ) 2 l 2 (1)

In Equation (1), k_{e} is an elastic coefficient of the type of Hooke’s modulus E from the field of mechanics:

σ = E ε or E = σ / ε (2)

showing the proportionality between p_{i} and the amplitude A_{m}. It follows that the measurement unit (in SI) of k_{e} will be

[ k e ] = [ p i ] [ l 2 ] [ A m ] 2 = N ⋅ s ⋅ m 2 m 2 = N ⋅ s (2a)

It follows that the measurement unit (in SI) of E from Equation (2) will be:

[ E ] = [ σ ] [ ε ] = N / m 2 − = N / m 2 (2b)

The unitary force f_{i} given by an EC, which is considered to be a continuous force in time resulting from the percussions p_{i} from an EC upon a MP, will be given by introducing (1) into (0), resulting in:

f i = ν p i = ν k e ( A m ) 2 l 2 (2c)

We will make an approximate assessment of the force f_{i} by adopting a possible value for the elastic constant k_{e} from Equation (1). We do this by utilizing its similarity to the value of the elastic coefficient E in Hooke’s law for a solid crystalline body (closest to the behaviour of the Type A ether in [

For steel, we have the following value from mechanics.

E ≈ 2 × 10 11 N / m 2 (2d)

Now, it follows that in Equation (2c) the expression with the same measurement unit (in SI) as E in (2b) will be

[ υ k e l 2 ] = [ f i ] [ ( A m ) 2 ] = N m 2 = [ E ′ ] (3)

From Equations (2a) and (3) we find the equivalence of terms.

k e = E ′ l 2 υ (3a)

We obtain a value of the ether modulus E ′ of about three orders of magnitude greater than that for steel from Equation (2d):

E ′ = 10 3 × E = 10 3 × 2 × 10 11 N / m 2 ≈ 2 × 10 14 N / m 2 (3b)

1). The case of astronomical distances. Now, we substitute in (3a) an astronomical distance l = 10^{7} m, and a frequency for the FVs approximately the same as for γ rays, i.e. ν = 10^{22} Hz, obtaining:

k e = 2 × 10 14 ( 10 7 ) 2 10 22 = 2 × 10 6 N ⋅ s (3c)

Here, we must consider the spatial problem of MP1 and MP2, with f_{i} representing the modulus of a spatial vector f i ¯ , oriented normally at the sphere surface of MP2 at any point.

The resultant force F_{P} given by the percussions produced by all the ECs in contact with MP2, with a total number of n percussions acting permanently in time on the sphere surface S of MP2 (

Let us calculate approximately the number n of ECs, for a diameter d_{1}, acting from the direction of MP1 on MP2 with diameter d_{2} (

n = S MP 2 s CE = π d 2 2 1 / 4 π d 1 2 = 4 d 2 2 d 1 2 (4)

The ECs are located with distances between them of approximately 2d_{1}. We consider that the diameter d_{1} of an EC is d_{1} = b_{e} = 10^{−}^{27} m, according to [_{2} = 10^{−}^{15} m. Entering these values into (4) results in the following number (pcs) of ECs in contact.

n = 4 ( 10 − 15 ) 2 ( 2 × 10 − 27 ) 2 = 4 10 − 30 4 × 10 − 54 = 10 24 pcs (4a)

We will consider that the FV amplitude A_{m} is of the order of 10^{−}^{3} d_{1}, similar to the working strain ε in the mechanics of solids.

The effects of percussions p_{i} (and f_{i}) acting at 360˚ will be given by their projections on the Ox axis f_{ix}, which gives a mean projection angle of 45˚, resulting in

f i x = f i cos 45 ∘ = f i ⋅ 0.71 (4b)

However, f_{ix} acts in two senses on the Ox axis, giving a distribution of approximately +50% and −50% in the two senses. The forces +f_{ix} are given by the distance l_{0} while the forces −f_{ix} are given by the distance (l_{0} + d_{1}). We can obtain from Equations (4b) and (2c):

f i 0 = 0.71 ν g l 2 with g = k e ( A m ) 2 (4c)

g = 2 × 10 6 ( 10 − 3 × 10 − 27 ) 2 = 2 × 10 − 54 N ⋅ s ⋅ m 2 (4d)

Using an astronomical distance l_{0} = 10^{7} m we can obtain from Equations (4b), (4c) and (4d):

1 0.71 f i 0 = 2 × 10 22 × 10 − 54 ( 10 7 ) 2 = 2 × 10 − 32 ( 10 7 ) 2 N (4e)

1 0.71 f i 1 = 2 × 10 22 × 10 − 54 ( 10 7 + 10 − 15 ) 2 = 2 × 10 − 32 ( 10 7 + 10 − 15 ) 2 N (4f)

Hence the net force is given by the difference of the forces from Equations (4e) and (4f):

Δ f i = f i 1 − f i 0 = 0.71 × 2 × 10 − 32 [ 1 ( 10 7 + 10 − 15 ) 2 − 1 ( 10 7 ) 2 ] (5)

Δ f i = f i 1 − f i 0 = 0.71 × 2 × 10 − 32 ( 10 7 ) 2 − ( 10 7 + 10 − 15 ) 2 ( 10 7 ) 2 ( 10 7 + 10 − 15 ) 2 = 0.71 × 2 × 10 − 32 10 14 − 10 14 − 2 × 10 7 × 10 − 15 − 10 − 30 10 14 ( 10 14 + 2 × 10 7 × 10 − 15 + 10 − 30 ) (5a)

Δ f i = f i 1 − f i 0 ≈ 0.71 × 2 × 10 − 32 × − 2 × 10 7 × 10 − 15 10 14 × 10 14 = − 0.71 × 2 × 10 − 32 × 2 × 10 − 8 10 28 = − 2.84 × 10 − 68 N (5b)

The total force of interaction F_{P} upon an MP, given by the net percussions Δf_{i} of all the ECs around it, can be calculated from Equations (4a) and (5b).

F P = n × Δ f i = − 10 24 × 2.84 × 10 − 68 = − 2.84 × 10 − 44 N (6)

For comparison, we will calculate the classical Coulomb force F_{C}, using Equation (1) of [^{7} m, this results in:

F c = − ( 1 e ) 2 4 π × 8.85 × 10 − 12 × l 2 = − ( 1.6 × 10 − 19 ) 2 4 π × 8.85 × 10 − 12 × ( 10 7 ) 2 = − 2.30 × 10 − 42 N (6a)

It is noted that in Equations (6) and (6a), the two forces F_{P} and F_{C} were obtained with values that were not equal but close, with F_{P} < F_{C}.

This can also be seen by considering that the value of F_{P} obtained in (6) is the force resulting from only one electric interaction path l_{i} out of multiple interaction paths and multiple corresponding forces F_{Pi}, as will be seen in Section 5.

The difference is also due to the approximations of the physical parameters of ether and of the simplified forces f_{i}, made in the above numerical calculation.

2). The case of a laboratory distance. Now, we substitute in Equation (3a) a laboratory distance l = 10^{−1} m and the same frequency for the FVs, and we obtain

k e = 2 × 10 14 ( 10 − 1 ) 2 10 22 = 2 × 10 − 10 N ⋅ s (7)

From Equations (4c) and (7) we obtain:

g = 2 × 10 − 10 ( 10 − 3 × 10 − 27 ) 2 = 2 × 10 − 70 N ⋅ s ⋅ m 2 (7b)

With a laboratory distance l_{0} = 10^{−}^{1} m we can obtain from Equations (4e), (4f) and (7b):

1 0.71 f i 0 = 2 × 10 22 × 10 − 70 ( 10 − 1 ) 2 = 2 × 10 − 48 ( 10 − 1 ) 2 N (8a)

1 0.71 f i 1 = 2 × 10 22 × 10 − 70 ( 10 − 1 + 10 − 15 ) 2 = 2 × 10 − 48 ( 10 − 1 + 10 − 15 ) 2 N (8b)

Hence, the net force Δf_{i} given by the difference of the forces f_{i} above, will be:

Δ f i = f i 1 − f i 0 = 0.71 × 2 × 10 − 48 [ 1 ( 10 − 1 + 10 − 15 ) 2 − 1 ( 10 − 1 ) 2 ] (9)

Δ f i = f i 1 − f i 0 = 0.71 × 2 × 10 − 48 ( 10 − 1 ) 2 − ( 10 − 1 + 10 − 15 ) 2 ( 10 − 1 ) 2 ( 10 − 1 + 10 − 15 ) 2 = 0.71 × 2 × 10 − 48 ( 10 − 1 ) 2 − ( 10 − 1 ) 2 − 2 × 10 − 1 × 10 − 15 − 10 − 30 10 − 2 ( 10 − 2 + 2 × 10 − 1 × 10 − 15 + 10 − 30 ) (9b)

Δ f i = f i 1 − f i 0 ≈ 0.71 × 2 × 10 − 48 × − 2 × 10 − 1 × 10 − 15 10 − 2 × 10 − 2 = − 0.71 × 2 × 2 × 10 − 48 × 10 − 16 10 − 4 = − 2.84 × 10 − 60 N (9c)

The total force of interaction F_{P} upon an MP, given by the net percussions Δf_{i} of all the ECs around it, can be calculated from Equations (4a) and (9c).

F P = n × Δ f i = − 10 24 × 2.84 × 10 − 60 = − 2.84 × 10 − 36 N (10)

For comparison, we will calculate the classical Coulomb force F_{C}, using Equation (1) of [^{−}^{1} m, this results in

F c = − ( 1 e ) 2 4 π × 8.85 × 10 − 12 × l 2 = − ( 1.6 × 10 − 19 ) 2 4 π × 8.85 × 10 − 12 × ( 10 − 1 ) 2 = − 2.30 × 10 − 26 N (10a)

It is noted that, in Equations (10) and (10a), the two F_{P} and F_{C} forces obtained were not equal, but were in the same large domain, with F P ≪ F C , which is also due to the approximations of the physical parameters of ether and the simplified forces f_{i}, used in the above numerical calculation and which is more suitable for astronomical distances.

Comparing this result with the result from i), we conclude that the method utilized above and also in [

This can also be seen by considering that the value of F_{P} obtained in (10) is the force resulting only from only one electric interaction path l_{i} from among many interaction paths and multiple corresponding forces F_{Pi}, as shown in Section 5.

We will now analyse the physical mechanism for producing an electrical interaction between the MPs, which we consider as being the only carriers of the positive and negative electric charges. This hypothesis implies the existence of only charged MP^{+} and MP^{−} microparticles, but in this paper the signs + and − will not be indicated but only supposed. Even particles which are considered neutral, such as neutrons, are composed of MP^{+} and MP^{−} pairs, giving zero total charge.

As a result of the electrical interactions between MPs in the ether, there will be a force that will act on each electrically charged MP. Classically, this force is considered today to be Coulomb’s F_{C} electric force.

However, this force was recently identified and named by the present authors [_{CC}.

The F_{CC} will be created as an effect of ε and γ ether deformations developed on the surface of the MP2, produced by the FVs originating from MP1. We can assume that the FVs are transmitted through ether, by rays, roads or paths, starting from MP1 and inclined at different angles α_{i} (_{i} the lengths of the complete paths between MP1 and MP2, starting at radius r_{i}.

The effect of ε and γ ether deformations is also seen by changes in the stresses σ and τ acting on the surface of MP2 (_{CC} according to the mechanism presented in Section 2.

The FVs travel at a speed c_{f}, with the first FVs reaching MP2 being those that travel the shortest direct path l_{0}, arriving after time t_{0} (

t 0 = l 0 / c f (11)

The first FVs will leave MP1 at time t_{i}. For simplicity, we adopt t_{i} = 0, without thereby affecting the generality of the analysis. These FVs create ε and γ (both with pulsation ω) deformations of the ether cell network, on the surface of MP2 (

Similarly, the FVs travelling along path l_{1} > l_{0} reach MP2 after time t_{1}.

t 1 = l 1 / c f (11a)

Meanwhile, the FVs that travel along path l_{2} > l_{1} arrive after time t_{2}

t 2 = l 2 / c f (11b)

while the FVs that travel along path l_{n} > l_{n}_{-}_{1} arrive after the time t_{n}.

t n = l n / c f (11c)

However, at the same time t_{0}, all the FVs travelling in the directions of rays r 1 , r 2 , r 3 , ⋯ , r n and moving along paths l 1 , l 2 , l 3 , ⋯ , l n , will be able to reach MP2 (_{0} and their paths must observe the condition of the total accumulated intervals Δl_{ti}, given that we also have:

Δ t = Δ l / c f , and hence (11d)

Δ l t i = l i − l 0 = t i c f (11e)

However, each of these FV_{i} vibrations creates a percussion force F_{P} on MP2, according to Equation (6) in Section 3.

All these F_{P} forces, when summed up over all FV_{i} vibrations on the entire surface S of MP2, create the Coulomb completed force F_{CC}, according to our hypothesis in Equation (21) from [

We can depict the elementary force of the F_{P} percussion type in a simple and natural general form similar to Equation (6), as a variation proportional to the inverse of the square root of the ray r travelled by the FVs in ether free of any other EPs.

F P = k p r 2 (12)

At time t_{0}, all the F_{Pi} forces created by FVs on MP2, leaving MP1 at times t_{i} from Equation (11c), preceding t_{0} and corresponding to the lengths l_{i} of the travelled paths, simultaneously act directly on MP2. The different forces F_{Pi} given by (12) oriented according to the rays r_{i} inclined at angles α_{i}, are as follows (

F P 0 = k p l 0 2 ; F P 1 = k p l 1 2 ; F P 2 = k p l 2 2 ; ⋯ ; F P i = k p l i 2 ; ⋯ ; F P n = k p l n 2 (13)

The total force F P t o t is obtained by summing all the F_{Pi} forces from Equations (13), as they are simultaneous actions with simultaneous percussions p_{i} in time. However, the sum must be vectorial.

This real F P t o t total force will only be obtained correctly if each force F_{Pi} in the series of forces in (13) is of the F_{Pi} type, i.e., is the result of a single full vibration FV_{i}, which will produce a single set of percussions p_{i}. This result can only be obtained if, when starting from MP1, the FV_{i} waves are separated in time by a time period T_{i}. This fact will correspond, on arrival at MP2, with the distance between two successive wavelengths of FV_{i}.

Δ l i = λ = c t (14)

On MP2b, the F_{2i} forces have the same formulas as in Equation (13), but with new distances l_{i} adapted according to

Below, we analyse the situation created at the surface of an MP2, where the specific deformations ε and γ(ω) occur in the EC network of the ether. These deformations are due to the FVs created by a series of microparticles MP1a, MP1b, MP1c, … (

Obviously, according to _{i} on the surface of MP2, located at distances l_{a}, l_{b}, l_{c} from MP1a, MP1b and MP1c, decrease inversely relative to the square of these distances, when taking into account the formula for F_{C} obtained in Equation (1) from [_{P} force obtained in Equation (13). This behaviour of FVs in the ether, considered as a special mechanical matter, is also justified by its similarity to a common physical phenomenon depending on 1/r^{2} in normal matter (solid, liquid or gas).

Therefore, the unitary forces σ and τ, exerted upon MP2 by the ECs due to the strains ε and γ(ω) created by MP1a, MP1b, …, will have to be inversely proportional to the square of these distances l a 2 , ⋯ , l c 2 , ⋯ based on the result from Section 4.

In _{a}, having the slope α_{0} = 0˚ with path length l_{a}, is represented as a grid of ECs near MP2 and as percussions p_{i}.

However, it is necessary to analyse the effects upon MP2 produced by other possible indirect paths starting from MP1, on various radii r_{1i} drawn in any direction with inclination angles α_{i} (Figures 5-7).

As the rays starting from MP1 are inclined at angle α_{i}, they are able to reach MP2 on an indirect path in the form of an isosceles triangle (_{i}.

Such a path can be accomplished physically by applying the Huygens principle to the midpoint C_{i} of the radius r_{1i} (_{i} will allow the construction of the symmetrical radius r ′ 1 i of the radius r_{1i}.

In fact, at the point C_{i} (_{1i}, will arrive at the same time as those arriving from the r_{2i} radius that started from MP2 simultaneously with r_{1i}. As a result, the interaction between MP1 and MP2 must be symmetrical in space and in time (

Therefore, it can also be considered that, at point C_{i} (_{1i} and r_{2i}. At this point, these rays mutually interchange their path, moving in the forward direction beyond point C_{i}. This phenomenon is symmetrical due to the symmetry of MP1 and MP2, including the ether homogeneity and hence the symmetry of HM16.

The rays r i + r ′ i , which are inclined at the angle α_{i}, will travel the corresponding distances l_{i} (_{i}.

However, at a certain moment (t_{0}), various waves with rays r_{i}, which left MP1 at various moments preceding t_{0} (the shortest time), will arrive at MP2 with forces F_{Pi} according to Equation (13), giving a total force F P t o t .

A question arises as to whether the overlapping of rays with various angles α_{i} > 0 from the other MPs existing in the range close to MP2 (_{P} between MP1 and MP2. The situation occurs in compact MBs (solids, liquids) when the distance d_{0} between neighbouring MPs is less than 1_{0} at a certain density.

However, as we discuss and analyse for two different physical situations for MP2, isolated or not isolated, the result for the F_{P} force must be different. Consequently, it is necessary to introduce a correction reducing F_{P} based on the MP density. Such a correction is possible using various mathematical procedures, including correcting the power of 2 in the distance l^{2}.

However, in our current stage of analysis, we evaluate the interaction between any MP1 and MP2 as isolated, considering the normal contribution of all the rays with angles α ≤ 45˚ (a cone, in space).

A calculus demonstrating the capping trend of decreasing of the F_{P} force with distance l (according to the term lnr), is presented in the following analysis. Here, we analyse the variation of electric force F_{P} with distance, starting from the percussions of the ether (Sections 4 and 5). The next calculation of F_{P} is based on multiple paths l_{i} of FVs between two MPs.

We consider the situation of two MPs, MP1 and MP2, each with an elementary electric charge ±q, located at a direct distance l_{0} (

The electrical interaction between the two MPs occurs via all FVs, which can occur outside the direct path l_{0} and travel on other deviating paths, with the general form of concave curves (

As a simplified particular case, we adopt here simple paths in the form of isosceles triangles, as discussed in Section 5.

In the general case, we accept that we have discretized the area of influence between MP1 and MP2 in a number n + 1 of curvilinear paths l_{i} (

These paths are arranged on one half of the interaction surface, which is bounded at the bottom by the Ox axis and at the top by the line inclined at 45˚, in the case of the plane problem. _{0}, l_{1}, l_{2}, l_{3} l_{4}, and l_{5}, which applies to the plane problem of the interaction between MP1 and MP2.

Further, in the general case with n + 1 paths l 0 , l 1 , l 2 , l 3 , ⋯ , l n , for the total force from the percussions F P t o t , noting the differences in the paths Δ l i = l i − l i − 1 , we have from Equation (13):

F P t o t = k p l 0 2 [ 1 + 1 ( 1 + Δ l 1 l 0 ) 2 + 1 ( 1 + Δ l 1 + Δ l 2 l 0 ) 2 + ⋯ + 1 ( 1 + Δ l 1 + Δ l 2 + ⋯ + Δ l n l 0 ) 2 ] (15)

For simplicity, we consider the length differences of paths Δl to be constant and identical between any two paths l_{i} and l_{i}_{-}_{1}. This does not significantly affect the final result. These paths differences Δl must be at least equal to the wavelength λ, according to Section 5, but may be multiples of it, as in the general case.

In turn, the lengths of successive paths l_{i} can be written as:

l i = l 0 + i Δ l with i ∈ ( 0 , n ) (16)

In this case, we can also write:

Δ l = l i − l i − 1 = l n − l 0 n (16a)

We will define the relative length difference ε as follows:

ε = Δ l l 0 (16b)

We will directly calculate the magnitude of the total corrected force F P t o t , adding, term by term, the F_{Pi} forces, which arise from the various FV waves that have passed along the paths l_{i} (

F P t o t = k p l 0 2 [ 1 + 1 ( 1 + Δ l l 0 ) 2 + 1 ( 1 + 2 Δ l l 0 ) 2 + ⋯ + 1 ( 1 + i Δ l l 0 ) 2 + ⋯ + 1 ( 1 + ( n ) Δ l l 0 ) 2 ]

F P t o t = k p l 0 2 [ 1 + 1 ( 1 + ε ) 2 + 1 ( 1 + 2 ε ) 2 + ⋯ + 1 ( 1 + i ε ) 2 + ⋯ + 1 ( 1 + ( n ) ε ) 2 ] (17)

It is noted that, in Equation (17), after the first term, there appears a series with n terms with the variable ratio q, where

q = ( 1 + ( k − 1 ) ε 1 + k ε ) 2 and the first term is a 1 = 1 ( 1 + ε ) 2 ; k ∈ ( 2 , 3 , ⋯ , n ) (18)

The sum of this series is too laborious to compute analytically.

Consequently, we will apply the numerical calculation method to the series sum, whose results can then be generalized as follows.

a.1) Situation Involving the Initial Distance l_{0}, Considering the Upper Half of the Plan Domain, Comprising 6 Paths

In this section, we use an approximate numerical empirical calculation by considering some numerical cases with a small number of paths (n + 1). The result obtained via this procedure can be then generalized and will be useful at the current stage of the HM16 model.

In the first situation a.1) (in the parentheses in (17)), we consider the initial case (_{max} = 45˚ from Equation (16a), we obtain:

δ l = l 5 − l 0 = 1.41 l 0 − l 0 = 0.41 l 0 (19)

Δ l = δ l n (20)

ε = Δ l l 0 = 0.41 l 0 l 0 ⋅ n = 0.41 5 = 0.082 (21)

By introducing (21) into Equation (17), we have:

F P t o t = k p l 0 2 [ 1 + 1 ( 1 + 0.082 ) 2 + 1 ( 1 + 2 × 0.082 ) 2 + 1 ( 1 + 3 × 0.082 ) 2 + 1 ( 1 + 4 × 0.082 ) 2 + 1 ( 1 + 5 × 0.082 ) 2 ] (22)

F P t o t = k p l 0 2 [ 1 + 0.854 + 0.783 + 0.644 + 0.567 + 0.503 ] = k e l 0 2 [ 1 + 3.35 ] = k e l 0 2 × 4.35 (22a)

a.1).s. A supplemental calculus (not reproduced here) also for this distance but with 9 paths gave the result:

F P t o t = k e l 0 2 ( 1 + 5.432 ) = k e l 0 2 × 6.432 (22b)

a.2) Situation Involving the Initial Distance l_{0}, on Half of the Plan Domain, with 11 Paths

Now, we double the number of paths by thickening the 6 paths considered in a.1), according to _{max} = 45˚ from (16b), we obtain:

δ l = l 10 − l 0 = 1.41 l 0 − l 0 = 0.41 l 0 (23)

ε = Δ l l 0 = 0.41 l 0 l 0 ⋅ 10 = 0.41 10 = 0.041 (23a)

By introducing (23a) into Equation (17), we obtain:

F P t o t = k p l 0 2 [ 1 + 1 ( 1 + 0.041 ) 2 + 1 ( 1 + 2 × 0.041 ) 2 + 1 ( 1 + 3 × 0.041 ) 2 + 1 ( 1 + 4 × 0.041 ) 2 + 1 ( 1 + 5 × 0.041 ) 2 + 1 ( 1 + 6 × 0.041 ) 2 + 1 ( 1 + 7 × 0.041 ) 2 + 1 ( 1 + 8 × 0.041 ) 2 + 1 ( 1 + 9 × 0.041 ) 2 + 1 ( 1 + 10 × 0.041 ) 2 ] (24)

F P t o t = k p l 0 2 [ 1 + 0.9227 + 0.8541 + 0.793 + 0.738 + 0.6886 + 0.644 + 0.6037 + 0.567 + 0.5335 + 0.503 ] = k p l 0 2 [ 1 + 6.847 ] = k p l 0 2 × 7.847 (25)

b.1) Situation with the Initial Distance Doubled (2l_{0}) on Half of the Plan Domain, with 6 Paths

In the second case in _{0} and n = 5 with 6 paths, so we replace l_{0} with 2l_{0} in Equations (16), (17) and (21), resulting in:

l 5 − l 0 = 1.41 × 2 l 0 − 2 l 0 = 0.41 × 2 l 0 = 0.82 l 0 (26)

Δ l = 0.82 l 0 5 = 0.164 l 0 (26a)

ε = Δ l 2 l 0 = 0.164 l 0 2 l 0 = 0.082 (26b)

By introducing (26b) into Equation (17), we obtain:

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 1 ( 1.082 ) 2 + 1 ( 1.164 ) 2 + 1 ( 1.246 ) 2 + 1 ( 1.328 ) 2 + 1 ( 1.41 ) 2 ] (27)

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 0.854 + 0.738 + 0.644 + 0.567 + 0.503 ]

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 3.306 ] = k p ( 2 l 0 ) 2 × 4.306 = k p ( 2 l 0 ) 2 1 4 × 4.306 = k p l 0 2 × 1.0765 (27a)

b.2) Situation with the Initial Distance Doubled (2l_{0}) on Half of the Plan Domain, with 11 Paths

Now, we double the number of paths by thickening the 6 paths considered in b.1) according to _{max} = 45˚, we obtain from (26a):

l 10 − l 0 = 1.41 × 2 l 0 − 2 l 0 = 0.41 × 2 l 0 = 0.82 l 0 (28)

Δ l = 0.82 l 0 10 = 0.082 l 0 (28a)

ε = Δ l 2 l 0 = 0.082 l 0 2 l 0 = 0.041 (28b)

Introducing (28b) into Equation (17), we have:

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 1 ( 1 + 0.041 ) 2 + 1 ( 1 + 2 × 0.041 ) 2 + 1 ( 1 + 3 × 0.041 ) 2 + 1 ( 1 + 4 × 0.041 ) 2 + 1 ( 1 + 5 × 0.041 ) 2 + 1 ( 1 + 6 × 0.041 ) 2 + 1 ( 1 + 7 × 0.041 ) 2 + 1 ( 1 + 8 × 0.041 ) 2 + 1 ( 1 + 9 × 0.041 ) 2 + 1 ( 1 + 10 × 0.041 ) 2 ] (29)

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 0.9227 + 0.8541 + 0.793 + 0.738 + 0.6886 + 0.644 + 0.6037 + 0.567 + 0.5335 + 0.503 ] = k p ( 2 l 0 ) 2 [ 1 + 6.847 ] = k p ( 2 l 0 ) 2 × 7.847 = k p ( l 0 ) 2 1 4 × 7.847 = k p ( l 0 ) 2 × 1.962 (29a)

b.2).s. A supplemental calculus (not reproduced here) also for this distance but with 17 paths gave the result:

F P t o t = k e l 0 2 ( 1 + 2.045 ) = k e l 0 2 × 3.045 (29b)

b.3) Situation with the Initial Distance Doubled (2l_{0}) on Half of the Plan Domain, with 21 Paths

Now, we double the number of paths by thickening the 6 paths considered in b.2) according to _{max} = 45˚, from (28a) we obtain:

l 20 − l 0 = 1.41 × 2 l 0 − 2 l 0 = 0.41 × 2 l 0 = 0.82 l 0 (30)

Δ l = 0.82 l 0 20 = 0.041 l 0 (30a)

ε = Δ l 2 l 0 = 0.041 l 0 2 l 0 = 0.0205 (30b)

By introducing (30b) into Equation (17), we have:

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 1 ( 1 + 0.0205 ) 2 + 1 ( 1 + 2 × 0.0205 ) 2 + 1 ( 1 + 3 × 0.0205 ) 2 + 1 ( 1 + 4 × 0.0205 ) 2 + 1 ( 1 + 5 × 0.0205 ) 2 + ⋯ + 1 ( 1 + 16 × 0.0205 ) 2 + 1 ( 1 + 17 × 0.0205 ) 2 + 1 ( 1 + 18 × 0.0205 ) 2 + 1 ( 1 + 19 × 0.0205 ) 2 + 1 ( 1 + 20 × 0.0205 ) 2 ] (31)

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 0.960 + 0.9227 + 0.887 + 0.8541 + 0.8227 + 0.793 + 0.7647 + 0.738 + 0.7126 + 0.6886 + 0.6658 + 0.644 + 0.6234 + 0.6037 + 0.5849 + 0.567 + 0.5499 + 0.5335 + 0.5179 + 0.503 ] = k p ( 2 l 0 ) 2 [ 1 + 13.271 ] = k p ( 2 l 0 ) 2 × 14.271 = k p ( l 0 ) 2 1 4 × 14.271 = k p ( l 0 ) 2 × 3.318 (31a)

c.1) Situation with the Initial Distance l_{0} and the Path Number Symmetrically Doubled across the Whole Plan Area

Let us now consider the complete plane situation shown in

Case a.1):

F P t o t = k p l 0 2 [ 1 + 3.35 + 3.35 ] = k p l 0 2 [ 1 + 6.70 ] = k p l 0 2 × 7.70 (32)

Case a.2):

F P t o t = k p l 0 2 [ 1 + 6.847 + 6.847 ] = k p l 0 2 [ 1 + 13.694 ] = k p l 0 2 × 14.694 (33)

Case b.1):

F P t o t = k p 4 l 0 2 [ 1 + 3.306 + 3.306 ] = k p 4 l 0 2 [ 1 + 6.612 ] = k p l 0 2 × 1.9034 (34)

Case b.2):

F P t o t = k p 4 l 0 2 [ 1 + 6.847 + 6.847 ] = k p 4 l 0 2 [ 1 + 13.694 ] = k p l 0 2 × 3.673 (35)

Case b.3):

F P t o t = k p 4 l 0 2 [ 1 + 13.271 + 13.271 ] = k p 4 l 0 2 [ 1 + 26.542 ] = k p l 0 2 × 6.885 (36)

Now, in the relations (32), (33), (34), (35) and (36), it can be observed that the coefficients multiplying the same fraction k p / l 0 2 are almost doubled, though not exactly but with a slightly diminished value, compared to similar cases in the relations (22a), (25), (27a), (29a) and (31a), as set out in Section 6.2.1 above. Accordingly, the favourable effect of the duplication of paths is acknowledged in this subsection.

d.1) Case of the Plane Domain Half Restricted: Path l_{0}, from Case a.1)

We now consider the case in which α = 60˚. We add four additional paths giving 6 + 4 = 10 paths from 6.2.1. The number of intervals will be n = 10 − 1 = 9.

δ l = l 10 − l 0 = 2 l 0 − l 0 = l 0 (37)

Δ l = δ l / n = l 0 / 9 = 0.111 l 0 ; ε = Δ l / l 0 = 0.111 (37a)

We introduce (37a) into Equation (17), resulting in:

F P t o t = k p l 0 2 [ 1 + 1 ( 1 + 0.111 ) 2 + 1 ( 1 + 2 × 0.111 ) 2 + 1 ( 1 + 3 × 0.111 ) 2 + 1 ( 1 + 4 × 0.111 ) 2 + 1 ( 1 + 5 × 0.111 ) 2 + ⋯ + 1 ( 1 + 9 × 0.111 ) 2 ] (38)

F P t o t = k p l 0 2 [ 1 + 0.810 + 0.6696 + 0.5628 + 0.4795 + 0.4135 + 0.3603 + 0.3166 + 0.2805 + 0.246 ] = k e l 0 2 [ 1 + 4.1388 ] = k e l 0 2 × 5.1388 (38a)

The increase in the coefficient will be 5.1388/4.35 = 1.18 = 118%. Accordingly, the favourable effect of increasing the angle α to 60˚ is confirmed.

d.2) Case of the Half Restricted Domain: Path 2l_{0}, from Case b.2)

We now consider the case in which α = 60˚. We add nine additional paths giving 10 + 9 = 19 paths from 6.2.1. The interval number is n = 19 − 1 = 18.

Δ l = l 19 − l 0 = 4 l 0 − 2 l 0 = 2 l 0 (39)

Δ l = δ l / n = 2 l 0 / 18 = 0.111 l 0 ; ε = Δ l / 2 l 0 = 0.111 l 0 / 2 l 0 = 0.0555 (39a)

We introduce (39a) into Equation (17) resulting in:

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 1 ( 1 + 0.0555 ) 2 + 1 ( 1 + 2 × 0.0555 ) 2 + 1 ( 1 + 3 × 0.0555 ) 2 + 1 ( 1 + 4 × 0.0555 ) 2 + 1 ( 1 + 5 × 0.0555 ) 2 + ⋯ + 1 ( 1 + 19 × 0.111 ) 2 ] (40)

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 0.8976 + 0.810 + 0.7349 + 0.6696 + 0.6127 + 0.5628 + 0.5186 + 0.4795 + 0.4447 + 0.4135 + 0.3855 + 0.3603 + 0.3374 + 0.3166 + 0.2978 + 0.2805 + 0.2647 + 0.246 + 0.2369 ] = k p ( 2 l 0 ) 2 [ 1 + 8.8696 ] = k p ( 2 l 0 ) 2 × 9.8696 = k p l 0 2 1 4 × 9.8696 = k p l 0 2 × 2.4674 (40a)

The increase in the coefficient will be 2.4674/1.962 = 1.25 = 125%. Consequently, the favourable effect of increasing the angle α from 45˚ to 60˚ is confirmed above (+25%). But the paths extension beyond 45˚ is not justified physically because it do not match with ether symmetry and homogeneity, and will be abandoned.

a) General Situation

In order to be able to generalize to the spatial problem from any of the plane problems in Section 6.2, the number of paths which it is possible to consider in the spatial case will be determined.

For this, we note that the central path l_{0} considers the ether as a cylinder of maximum radius r_{0} in the middle part of the path (_{0}, is arranged in a circular manner with the cylinders centred on the paths in the form of a circle with radius r_{1} = 2r_{0}. The length of this circle is

L 1 = 2 π r 1 = 2 π ( 2 r 0 ) = 4 π r 0 (41)

The circles in row 2, which are evenly distributed, will have centres located on the L_{1} circle to which a length reduction of approximately 5% is applied, to take account of the curvature of the route. Under these conditions, the reduced cylinder diameter will be d r = 0.95 × 2 r 0 = 1.9 r 0 . Meanwhile, the number of adjacent circles (and cylinders) N_{1} will be (

N 1 = L 1 d r = 4 π r 0 1.9 r 0 = 4 π 1.9 = 6.61 pcs (42)

Now, the paths in the third row with radius r_{0} are placed with the centres of the cylinders on the circle with radius r_{2} = 4r_{0}. The length of this circle is (

L 2 = 2 π r 2 = 2 π ( 4 r 0 ) = 8 π r 0 (43)

The number of uniformly distributed circles will be:

N 2 = L 2 d r = 8 π r 0 1.9 r 0 = 8 π 1.9 = 13.2 pcs (44)

Similarly, the paths in the fourth row with radius r_{0} can be distributed with the centres of the cylinders on the circle having a radius r_{3} = 6r_{0}. The length of this circle is:

L 3 = 2 π r 3 = 2 π ( 6 r 0 ) = 12 π r 0 (45)

The number of adjacent circles, evenly distributed, will be:

N 3 = L 3 d r = 12 π r 0 1.9 r 0 = 12 π 1.9 = 19.8 pcs (46)

From Equations (42), (44) and (46), we can observe the rule for forming the rows of cylinders, the number of which is an arithmetic progression, with a ratio of approximately 6 pcs (covered for 7 pcs) and having the first term equal to 1.

b) Particular Situations

e.1) Situation Involving the Initial Distance l_{0} in Space, with 6 Initial Paths (from Case a.1)

We now recalculate the magnitude of the force of interaction F_{P} between MP1 and MP2, considering all spatial paths for the initial distance l_{0}, starting from the six paths in Section 6.2. The number of these paths (pieces) will be in accordance with the rule above:

N t o t = 1 + 6 + 13 + 19 + 25 + 31 = 95 pcs (47)

The magnitude of the F_{P} interaction force is obtained from (22a) using (47):

F P t o t = k p l 0 2 [ 1 × 1 + 0.854 × 6 + 0.783 × 13 + 0.644 × 19 + 0.567 × 25 + 0.503 × 31 ] = k p l 0 2 [ 1 + 5.12 + 10.18 + 12.23 + 14.17 + 15.59 ] = k e l 0 2 × 58.29 (48)

e.2) Situation Involving the Initial Distance l_{0} in Space, with 11 Initial Paths (from Case a.2)

We now recalculate the magnitude of the force of interaction F_{P} between MP1 and MP2, by considering all spatial paths for the initial distance l_{0}, starting from the six paths in Section 6.2. The number of these paths will be in accordance with the rule above:

N t o t = 1 + 6 + 13 + 19 + 25 + 31 + 37 + 43 + 49 + 55 + 61 = 340 pcs (49)

The magnitude of the F_{P} interaction force is obtained from (24a) using (49):

F P t o t = k p ( l 0 ) 2 [ 1 × 1 + 0.9227 × 6 + 0.8541 × 13 + 0.793 × 19 + 0.738 × 25 + 0.6886 × 31 + 0.644 × 37 + 0.6037 × 43 + 0.567 × 49 + 0.5335 × 55 + 0.503 × 61 ] = k p ( l 0 ) 2 [ 1 + 5.536 + 11.10 + 15.06 + 18.45 + 21.34 + 23.83 + 25.96 + 27.78 + 29.34 + 30.68 ] = k p l 0 2 × 210.10 (50)

f.1) Situation Involving the Doubled Distance (2l_{0}) in Space, with 6 Initial Paths (from Case b.1)

We now recalculate the magnitude of the force of interaction F_{P} between MP1 and MP2, by considering all spatial paths for the doubled initial distance 2l_{0}, starting from the 6 paths in Section 6.2. The number of these paths will be in accordance with the rule above:

N t o t = 1 + 6 + 13 + 19 + 25 + 31 = 95 pcs (51)

The magnitude of the interaction force F_{P} is obtained from (27a) using (51):

F P t o t = k p ( 2 l 0 ) 2 [ 1 × 1 + 0.854 × 6 + 0.738 × 13 + 0.644 × 19 + 0.567 × 25 + 0.503 × 31 ] = k p ( 2 l 0 ) 2 [ 1 + 5.12 + 9.594 + 12.23 + 14.17 + 15.59 ] = k p ( 2 l 0 ) 2 × 57.704 = k p l 0 2 1 4 × 57.704 = k p l 0 2 × 14.42 (52)

f.2) Situation Involving the Doubled Distance (2l_{0}) in Space, with 11 Initial Paths (from Case b.2)

We now recalculate the magnitude of the force of interaction F_{P} between MP1 and MP2, by considering all spatial paths for the doubled initial distance 21_{0}, starting from the 11 paths in Section 6.2. The number of these paths will be in accordance with the rule above:

N t o t = 1 + 6 + 13 + 19 + 25 + 31 + 37 + 43 + 49 + 55 + 61 = 340 pcs (53)

The magnitude of the interaction force F_{P} is obtained from (29a) using (53):

F P t o t = k p ( 2 l 0 ) 2 [ 1 × 1 + 0.9227 × 6 + 0.8541 × 13 + 0.793 × 19 + 0.738 × 25 + 0.6886 × 31 + 0.644 × 37 + 0.6037 × 43 + 0.567 × 49 + 0.5335 × 55 + 0.503 × 61 ] = k p ( 2 l 0 ) 2 [ 1 + 5.536 + 11.10 + 15.06 + 18.45 + 21.34 + 23.83 + 25.96 + 27.78 + 29.34 + 30.68 ] = k p l 0 2 1 4 × 210.10 = k p l 0 2 × 52.52 (54)

f.3) Situation Involving the Doubled Distance (2l_{0}) in Space, with 21 Initial Paths (from Case b.3)

We now recalculate the magnitude of the force of interaction F_{P} between MP1 and MP2, by considering all spatial paths for the doubled initial distance 21_{0}, starting from the 21 paths in Section 6.2. The number of these paths will be in accordance with the rule above:

N t o t = 1 + 6 + 13 + 19 + 25 + 31 + 37 + 43 + 49 + 55 + 61 + 67 + 73 + 79 + 85 + 91 + 97 + 103 + 109 + 115 + 121 = 340 + 940 = 1290 pcs (55)

The magnitude of the F_{P} interaction force is obtained from (31a) using (55):

F P t o t = k p ( 2 l 0 ) 2 [ 1 + 0.960 × 6 + 0.9227 × 13 + 0.887 × 19 + 0.8541 × 25 + 0.8227 × 31 + 0.793 × 37 + 0.7647 × 43 + 0.738 × 49 + 0.7126 × 55 + 0.6886 × 61 + 0.6658 × 67 + 0.644 × 73 + 0.6234 × 79 + 0.6037 × 85 + 0.5849 × 91 + 0.567 × 97 + 0.5499 × 103 + 0.5335 × 109 + 0.5179 × 115 + 0.503 × 121 ]

= k p ( 2 l 0 ) 2 [ 1 + 5.76 + 11.995 + 16.853 + 21.35 + 25.50 + 29.34 + 32.88 + 36.16 + 39.19 + 42.0 + 44.61 + 47.0 + 49.25 + 51.31 + 53.22 + 54.99 + 56.64 + 58.15 + 59.56 + 60.86 ] = k p ( 2 l 0 ) 2 ( 1 + 796.62 ) = k p ( l 0 ) 2 1 4 × 797.62 = k p ( l 0 ) 2 × 199.40 (56)

In Sections 6.2.1 and 6.3, based on the analysis of the variation with distance l of the force of electrical interaction F_{P} between the two MPs (See Section 6.1.), a series of numerical calculations was performed for some particular cases involving the distance l_{0} between MP1 and MP2, the limit of angle α, the spatial distribution of paths and the path deformation ε. The initial conditions and results of calculations for the forces F_{P} are presented in

The purpose of this calculation was to establish a new correlation between the magnitude of the force F_{P} and the change in the distance l between MP1 and MP2. For the distance between MP1 and MP2, multiple integer values of an initial distance l_{0}, i.e. l 0 , 2 l 0 , 3 l 0 , ⋯ were considered.

However, it was sufficient for generalization purposes to use only the first two multiples of the distance l_{0}, i.e., l_{0} and 2l_{0}. For n paths l_{i} between MP1 and MP2, 6, 11 and 21 paths were considered, which proved to be sufficiently precise for generalization.

Cases/Paragr. | Angα (˚) | Plan/ zone | Dist. | No. n + 1 | Deformation ε | Force F_{P } | Final F_{P } |
---|---|---|---|---|---|---|---|

a.1) | 45 | up | l_{0 } | 6 | ε = Δ l / l 0 = 0.082 | ( 1 + 3 . 35 ) ⋅ k p / l 0 2 ^{ } | 4.35 ⋅ k p / l 0 2 |

a.1).s | 45 | up | l_{0 } | 9 | ε = Δ l / l 0 = 0.05125 | ( 1 + 5.432 ) ⋅ k p / l 0 2 ^{ } | 6.432 ⋅ k p / l 0 2 |

a.2) | 45 | up | l_{0} | 11 | ε = Δ l / l 0 = 0.041 | ( 1 + 6.847 ) ⋅ k p / l 0 2 | 7.847 ⋅ k p / l 0 2 |

b.1) | 45 | up | 2l_{0} | 6 | ε = Δ l / 2 l 0 = 0.082 | ( 1 + 3.306 ) ⋅ k p / ( 2 l 0 2 ) | 1.0765 ⋅ k p / l 0 2 |

b.2) | 45 | up | 2l_{0} | 11 | ε = Δ l / 2 l 0 = 0.041 | ( 1 + 6.847 ) ⋅ k p / ( 2 l 0 2 ) | 1.962 ⋅ k p / l 0 2 |

b.2).s | 45 | up | 2l_{0} | 17 | ε = Δ l / 2 l 0 = 0.02562 | ( 1 + 11.10 ) ⋅ k p / ( 2 l 0 2 ) | 3.045 ⋅ k p / l 0 2 |

b.3) | 45 | up | 2l_{0} | 21 | ε = Δ l / 2 l 0 = 0.0205 | ( 1 + 13.271 ) ⋅ k p / ( 2 l 0 2 ) | 3.318 ⋅ k p / l 0 2 |

c.1)/a.1) | 45 | u/d | l_{0 } | 6 | ε = Δ l / l 0 = 0.082 | ( 1 + 6.70 ) ⋅ k p / l 0 2 ^{ } | 7.70 ⋅ k p / l 0 2 |

/a.2) | 45 | u/d | l_{0} | 11 | ε = Δ l / l 0 = 0.041 | ( 1 + 13.694 ) ⋅ k p / l 0 2 | 14.694 ⋅ k p / l 0 2 |

/b.1) | 45 | u/d | 2l_{0} | 6 | ε = Δ l / 2 l 0 = 0.082 | ( 1 + 6.612 ) ⋅ k p / ( 2 l 0 2 ) | 1.934 ⋅ k p / l 0 2 |

/b.2) | 45 | u/d | 2l_{0} | 11 | ε = Δ l / 2 l 0 = 0.041 | ( 1 + 13.694 ) ⋅ k p / ( 2 l 0 2 ) | 3.673 ⋅ k p / l 0 2 |

/b.3) | 45 | u/d | 2l_{0} | 21 | ε = Δ l / 2 l 0 = 0.0205 | ( 1 + 26.542 ) ⋅ k p / ( 2 l 0 2 ) | 6.885 ⋅ k p / l 0 2 |

d.1) | 60 | up | l_{0} | 10 | ε = Δ l / l 0 = 0.111 | ( 1 + 4.138 ) ⋅ k p / l 0 2 | 5.138 ⋅ k p / l 0 2 |

d.2) | 60 | up | 2l_{0} | 19 | ε = Δ l / 2 l 0 = 0.055 | ( 1 + 8.8696 ) ⋅ k p / ( 2 l 0 2 ) | 2.467 ⋅ k p / l 0 2 |

e.1) | 45 | cone | l_{0} | 6 | ε = Δ l / l 0 = 0.082 | ( 1 + 57.29 ) ⋅ k p / l 0 2 | 58.29 ⋅ k p / l 0 2 |

e.2) | 45 | cone | l_{0} | 11 | ε = Δ l / l 0 = 0.041 | ( 1 + 209.10 ) ⋅ k p / l 0 2 | 210.10 ⋅ k p / l 0 2 |

f.1) | 45 | cone | 2l_{0} | 6 | ε = Δ l / 2 l 0 = 0.082 | ( 1 + 56.704 ) ⋅ k p / ( 2 l 0 2 ) | 14.42 ⋅ k p / l 0 2 |

f.2) | 45 | cone | 2l_{0} | 11 | ε = Δ l / 2 l 0 = 0.041 | ( 1 + 209.10 ) ⋅ k p / ( 2 l 0 2 ) | 52.52 ⋅ k p / l 0 2 |

f.3) | 45 | cone | 2l_{0} | 21 | ε = Δ l / 2 l 0 = 0.0205 | ( 1 + 796.60 ) ⋅ k p / ( 2 l 0 2 ) | 199.1 ⋅ k p / l 0 2 |

It was intended to obtain information on the F_{P} force variation when changing both the above parameters: the distance l and the number of paths n + 1, where n represents the side paths, but not the central path.

However, in order to have comparable values for the two values of the F_{P} force, when both of the above parameters (number n of paths and distance l_{0}) change, we firstly compare the situation for the distance 2l_{0} with that for the distance l_{0} (

A). For the plane situation, to highlight the effect of doubling the distance l_{0}→21_{0} on F_{P}, the following 4 combinations of cases a.) to f.) from _{F} = F_{P}_{2}/F_{P}_{1} for 2l_{0} and for l_{0} at corresponding paths number n + 1, of 6, 11 and 21.

i). The plane situation with upward paths (u) with 11/6 paths, Case b.2) with F_{P}_{2}, versus Case a.1) with F_{P}_{1}, give the next values for the forces F_{P} ratio r_{F}:.

r F = F P 2 / F P 1 = 1.962 / 4.35 = 0.45 (57)

i).s. The plane situation with upward paths (u) with 17/9 paths, Case b.2).s. with F_{P}_{2}, versus Case a.1).s. with F_{P}_{1}, give the next values for the forces F_{P}.

r F = F P 2 / F P 1 = 3.045 / 6.432 = 0.473 (57b)

One remark here that increasing the paths number n + 1, from 6 to 9, gives only a little influence on r_{F}, so the number of 6 paths utilised above is correct and sufficient.

ii). The plane situation with upward paths (u) with 21/11 paths, Case b.3) with F_{P}_{2}, versus Case a.2) with F_{P}_{1}, give the next values for the forces F_{P}.

r F = F P 2 / F P 1 = 3.318 / 7.847 = 0.42 (58)

iii). The plane situation as in c.1) with upward and downward paths (u/d) with 11/6 paths, Case c.1)/b.2) with F_{P}_{2}, versus Case c.1)/a.1) with F_{P}_{1}, give the next values for the forces F_{P}.

r F = F P 2 / F P 1 = 3.67 / 7.70 = 0.47 (59)

iv). The plane situation as in Case c.1) with upward and downward paths (u/d) with 21/11 paths Case c.1)/b.3) with F_{P}_{2}, versus Case c.1)/a.2) with F_{P}_{1}, give the next values for the forces F_{P}.

r F = F P 2 / F P 1 = 6.8857 / 14.694 = 0.47 (60)

The plane situation for the paths results in a decrease in F_{P}_{2} of approximately 54.4% (mean ratio r_{F} = 0.456) of F_{P}_{1}, by doubling the distance l between MPs.

However, the decrease in F_{C} force ratio r_{F} = according to Coulomb’s law for doubling the distance l, is:

r F = F C 2 / F C 1 = [ 1 / ( 2 l 0 ) 2 ] / [ 1 / ( l 0 ) 2 ] = 1 / 4 = 0.25 ≪ 0.456 (61)

This indicates a decrease in F_{P} force with only 54.7% compared with 75.0% decrease for F_{C} force. Even in this case, with only incomplete plane paths, result of Coulomb’s law differs markedly from Equations (57)-(60).

B). For the spatial situation with a conic at 2 × 45˚ distribution of paths, to highlight the effect of doubling the distance l_{0}→21_{0} on F_{P}, the following two Cases from

i). The spatial situation, with 11/6 paths, Case f.2) with F_{P}_{2}, versus Case e.1) with F_{P}_{1}, give the next values for the forces F_{P} ratio r_{F}.

r F = F P 2 / F P 1 = 52.52 / 58.29 = 0.90 (62)

ii). The spatial situation, with 21/11 paths, Case f.3) with F_{P}_{2}, versus Case e.2) with F_{P}_{1}, give the next values for the forces F_{P}.

r F = F P 2 / F P 1 = 199.0 / 210.1 = 0.947 (63)

One remark here that the spatial situation from B), compared with the plane situation from A) gives an important favourable influence on r_{F} ratio, which has increased strongly, so only the spatial situation must be considered in future, which is also physically justified.

The spatial situation of paths from ii). gives an r_{F} ratio of F_{P} forces from relation (63) which indicate a diminution of F_{P} forces with about 5.3% (ratio 0.947), by doubling the distance between MPs.

This also must be compared with the r_{F} ratio of F_{C} forces according to Coulomb’s law, where doubling the distance l_{0} from (61), results in:

r F = F C 2 / F C 1 = 0.25 ≪ 0.947 (64)

Also, in this spatial case, Coulomb’s law in Equation (61) is more clearly not confirmed by result from (63).

This indicates a decrease in F_{P} force with only 5.3% compared with the decrease of 75.0% (ratio 0.25) for F_{C} force by doubling distance l_{0}.

It appears probable, that by increasing the number n of paths beyond n = 21, one could obtain a ratio r_{F} = F_{P}_{2}/F_{P}_{1} greater than 0.947 or equal to 1.0, or even greater than 1.0.

However, the result from (63) provides strong support for justifying the introduction of the term lnr in the F_{CC} formula from [

This justification appears because, in this case of F_{CC}, the effect of doubling the distance from l_{0} to 2l_{0} is the next:

r F = F C C 2 / F C C 1 = ln ( 2 l 0 ) 2 / ln l 0 2 = 2 ⋅ ln ( 2 l 0 ) / 2 ⋅ ln l 0 = ln 2 l 0 / ln l 0 = ln 2 / ln l 0 + 1 (65)

We observe in (65) that for long distances l_{0}, the first term becomes zero and the ratio r_{F} of F_{CC} forces tends to 1.0.

Consequently, the result from (63) is almost the same as that from (65) for long distances, and hence this result justifies the presence of the term lnr in the formula for the F_{CC} force from [

We remark that in any of the pairs of comparable cases above from A) and B), the condition of the equality of maximum intervals Δd_{2} = Δd_{1} was considered, between two successive paths, at the midpoint of the distance between the two MPs (

We observe that the result obtained in (63) for the electrical interaction force F_{P} between MP2 and MP1, indicates a spatial effect of the ether which leads at a limit of r_{F} to 1.0 in the decrease of the F_{P} forces ratio when doubling the distance l, in contrast to Coulomb’s F_{C} forces whose ratio r_{F} decreases to 0.25 with doubling l.

But this result for F_{P} is in concordance with the presence of term lnr in formula of F_{CC} force from [

We must remark that results for all the Cases above analysed, when we doubled the distances from l_{0} to 2l_{0}, can be generalised for new doubled distances: 2 l 0 , 4 l 0 , 8 l 0 , 16 l 0 , 32 l 0 , ⋯ , when the first forces F ratio r_{F}, must be put at the correspondent power:

r F , ( r F ) 2 , ( r F ) 3 , ( r F ) 4 , ( r F ) 5 , ⋯ (66)

In case of F_{C} force, the first ratio r_{F} = 0.25 put at rising powers from (66) will tend quickly to zero.

But in case of F_{P} force, the first ratio r F = 0.95 , ⋯ , 1.0 , put at rising powers from (66) will tend to approx. 1.0, as tends also the r_{F} ratio for term lnr, (in 65), so being justified its presence.

The physical explanation for this result from (63) lies in the presence around MP1 and MP2 of ether cells (ECs), which transmit the percussion forces F_{P}, not by a single direct path but by multiple paths between MP1 and MP2, spatially distributed, but some of them simultaneously arriving at MP2, so that their effect is superposed.

These multiple forces F_{P} continue to arrive at MP2 at any moment in time, and hence they accumulate. The number n of paths l_{i} increases as the distance is doubled, compensating for the diminution of the percussion forces F_{P} by 1/l^{2} term.

In this paper, we analysed the role of the ether and the effect of its presence in nature, in the form of our HM16 model, with reference to the interaction between two MPs situated at the distance l. The interaction consists of forces F_{P}, produced by mechanical percussions between MPs through the ether vibrations FVs, and depending on 1/l^{2}. But the forces F_{P}, constitute in fact the so called electric Coulomb’s forces F_{C}, between so called electric charges, which charges in fact do not exist as a physical quantity.

We have shown that the force F_{P}, regarded as the basic elementary electric force, can be considered as the resultant force of multiple percussions p_{i} on an MP. These percussions are produced by the vibrating ECs of the ether and are transmitted by the fundamental vibrations (FVs) created in ether by other MPs. Was calculated that individual F_{P} force given by the ether percussions at astronomical distances is practically equal with F_{C}, but at laboratory distance discrepancies appear, indicating the theory applicability at long distances.

An initial assessment of the all F_{P} forces upon an MP was made in the paper, using a simplified numerical calculation, aimed to determine the effect of all FVs travelling along various rays/paths l_{i} through the ether, between two MPs considered today as having electric charges.

However, a series of such paths departing in a given time interval from MP1, at different angles from the direct path to MP2, but inside an angle of 45˚, will arrive at the same moment t_{0} at MP2, with the result that their individual forces F_{Pi} cumulates their effects, and so compensating the decrease of F_{P} due to the term in 1/l^{2}.

As a result of these multiple paths and of associated forces F_{Pi}, a limited to 1.0 decrease in the final F_{P} force was obtained in the calculations, along with an increase in the distance l, in contrast to Coulomb’s law, where F_{C} decreases to zero with increasing l, due to the term in 1/l^{2}.

The effects of these multiple paths, of associated forces F_{Pi}, and of the spatial presence of the ether, were evaluated by numerical calculus which furnished a limit to 1.0 in the decrease of the F_{P} forces ratio, when doubling the distance l. This result is in contrast to Coulomb’s F_{C} forces, whose ratio decreases to 0.25 with doubling l, and to zero after multiples doublings.

Accordingly, the possibility of including the term lnr in the F_{CC} forces was demonstrated, because the ratio of decreasing of lnr is capped also to 1.0 for doubling l at long distances.

These results justify the possibility and necessity of introducing the term lnr into the F_{CC} force in Equations (21) in [

As a consequence of the above results validating the F_{CC} force formula, the electrical nature of gravity based on the electrical dipole constitution of matter, is confirmed, since numerical results given by F_{DC} force as gravity force, are very close to those gave by Newton’s law force F_{N} [

Our “new gravity” theory, starting from the F_{CC} electric force in [_{DC} force between the electrical dipoles of all matter. The formula of F_{DC} force is constituted by a series of powers of r^{x}, which is different from Newton’s simple gravitational force F_{N}.

However, the new form of the gravitational force F_{DC} will explain special phenomena observed elsewhere.

The above results through F_{DC} as gravitation force, undermine the usefulness of gravity wave searches, of black hole hunting and of searches for dark matter and dark energy, which can all (among other things) be explained by the new gravity force F_{DC}.

Obviously, our overall analysis of gravity started earlier in 2000, with the admission of the existing error in Michelson’s calculation [_{N}, which can be replaced by the F_{DC} force, appearing between any two electrical dipoles constituents of all the matter, at any distance. But the F_{DC} force complex general equation, needs to be developed and applied to different practical situations, by physics community.

The first author acknowledges the initial advice on the subject and the encouragement of his late professor N. Barbulescu. He is sincerely grateful to the late Prof. P. Mazilu from TUCB Bucharest for his rigorous lessons on rationality. He is also indebted to Gen. Prof. G. Barsan, Col. Prof. Al. Babos from LFA Sibiu, Prof. D. Stoicescu from ULBS Sibiu, Prof. D. Siposan from MTA Bucharest and Miss Veronica Has from Bucharest, for their continued or past support. For the first developments of this theme, the authors appreciate the support of the MEC (grant under contract no. 05-D11-54/2005).

The authors declare no conflicts of interest regarding the publication of this paper.

Has, I., Miclaus, S. and Has, A. (2019) An Analysis of the Origin of the Interaction Force between Electric Charges, including Justification of the lnr Term in the Completed Coulomb’s Law, in HM16 Ether. Journal of Modern Physics, 10, 1090-1124. https://doi.org/10.4236/jmp.2019.109071