^{*}

At this article studies of nonlinear viscoelastic fluid with one internal tensor parameter flow between parallel planes under a constant pressure gradient, taking into account the slipping phenomenon on the boundary. Numerically depending found on the components of the stress tensor and the flow velocity of the pressure gradient and the distance to the wall, enabled us to explain the emergence of non-parabolic profile of the flow velocity of the polymeric melt.

Many fluid systems, including polymeric materials, reveal the anomaly of slipping often near the solid surface. The presence of such a wall effect leads to a violation of the hypothesis on attachment and the need to specify appropriate boundary conditions.

This anomalous behavior of materials in a plastic state (slurry, grease, fluids and polymer melts) at solid surfaces requires a comprehensive study of both rheological properties and calculating the flow parameters and characteristics of the processing equipment. In the first place, there are rather complex problems of determining the rheological characteristics of the material results according to the viscometric studies. The next stage is associated with specific problems on the motion of fluids which exhibit abnormalities in solid surfaces and the direct use the sliding velocities as boundary conditions.

It should be noted that the study of this issue is reviewed in a large number of papers in [

The first approach is a detailed study and consideration of molecular properties of contacting media, the formulation of a mechanism of slippage and checking the adequacy of the proposed approach. Moreover, the results for different physical systems have much in common, which indicates the possibility of a unified approach to the study of this effect.

The second approach is to specify explicitly the slip velocity at the wall –, which is generally a function of stress at the wall –, the geometric dimensions and temperature. And this dependence of slip velocity at the wall of these factors can be found from viscometric measurements [

From the mathematical point of view, the result of each approach leads to dependence –, and this dependence is taken from the processed experimental data. At the same time as an argument, you can choose not only –, but the pressure gradient and the specific consumption and the choice of a particular function in the study depending on how easily one can apply the law in the calculations.

In modeling the flow of solutions and melts of linear polymers formulating rheological constitutive relations plays an important role. It establishes the relationship between the kinematic characteristics of the flow and internal thermodynamic parameters. Previously a simple rheological model based on microstructural representations [2,3] was proposed

where—the stress tensor; p—hydrostatic pressure, and—the initial values of the shear viscosity and relaxation time,—the tensor of velocity gradients;—symmetric second rank anisotropy tensor; —the first invariant of the anisotropy tensor, —the symmetrized velocity gradient tensor,—phenomenological model parameters that take into account in the equations of the dynamics of the macromolecule size and shape of the molecular coil. This model was tested for compliance by viscosimetric flow of real polymeric liquids [2-7] and by calculating the overlap of small oscillatory fluctuations in simple shear flow in the parallel and orthogonal shear directions [

Also on the basis of the rheological model (1) seconddary flows in rectangular channels were calculated. Paper [

In this paper we will solve the problem of determining the velocity profile of a nonlinear viscoelastic fluid moving between parallel planes under a constant pressure gradient:, based on model (1). We arrange the origin of one of these planes, axis directed along the flow, axis—perpendicular to the plane and axis—perpendicular to axes and.

Then the system of equations of dynamics in Cartesian coordinates will be:

(2)

where:, ,—velocity along the axes, and respectively,—the density.

Since along axis velocity profile will not change, the final expression does not depend on the variable z and the system of Equations (1) and (2) becomes:

The system of Equations (3) describes the flat twodimensional unsteady flow of polymer media. Further, we find independent of variable x solutions of the system and we obtain:

The first Equation (4) implies that—linear function y, but due to boundary conditions: , which shows that: and the continuity equation is automatically satisfied. Given this, Equation (4) can be rewritten as:

In the stationary case we have:

In [

where

Second Equation of (5) shows that non-zero pressure gradient in the direction perpendicular to the flow velocity is found. However, that does not lead to the emergence of secondary flows. This pressure gradient may be due to the effect of swelling of the jet at the exit of the channel. The expressions obtained due to approximation can not be used for large pressure gradients that are of interest in practice, therefore we will be selins depending on the expressions for the components of the stress tensor and the components of the velocity without the smalllness of the model parameters. Then out of the first equation of system (5) we have:

This shows that the shear stresses for two dimensional steady flow is a linear function of the variable, and the constant of integration is chosen from the condition of symmetry: For clarity, we introduce the following notation:

Then the system of Equations (5) becomes:

(8)

Subtracting the first Equation (9) the last equation, after transformations we obtain:

The second Equation of (8) can be rewritten as:

Then dividing (9) to (10) we obtain:

or (11)

Substituting (11) in the last Equation (8) we obtain an equation containing only variable that, once converted in the form:

Equation (12) can be solved by one of the iterative methods, such as the method of successive approximations, and taking into account the expression (6), we can find the dependence: that is, by virtue of (11) and (10) leads to dependence and. Next numerically integrating, using (7) and using the boundary condition the dependence can be found.

It turns out that as an additive constant of integration, the total flow rate will have the form

where—the additional flow rate calculated under the condition at the wall sticking. If we assume that is a function of—the stress at the wall, when calculating the velocity profile becomes necessary in an iterative procedure for approval and.

If we assume that is a function of the, then this procedure isn’t necessary to carry out The dependence can be easily obtained by processing experimental data, as done in

Values themselves were determined by the formula:.

Note that the data for low density polyethylene have been described based on the approach (1) in [

Let us now consider how to influence the parameters of the model, and the type of derived dependencies. To this end, fix scale parameters, and (in this case), and will take into account that in many cases, as shown in [

In order to allow comparison with experimental data [

Thus, in considering the case of plane Poiseuille flow with allowance for slippage of the polymer material at the boundary, the system of equations of the modified model Vinogradov and Pokrovskii describes non parabolic velocity profile in the gap between parallel plates, which is confirmed by experimental data. Dependence obtained in this can be used to develop numerical methods for 2-dimensional and 3-dimensional flows as an initial approximation of input and output profiles in the simulation of flows of polymer fluids in the gap between parallel planes, for example, when forming thin films.

The authors greatly appreciate Prof. Vladimir Pokrovskii for his interest to this work and useful discussions.