_{1}

^{*}

The agricultural sector is the basis of livelihood for a large proportion of society in Ethiopia. In the three political regimes in modern Ethiopia, the Imperial, the military and the Ethiopian people revolutionary democratic front (EPRDF), agriculture has been regarded as a critical sector. The Agricultural Development Led Industrialization (ADLI) is the national policy of the country. Regardless of the government policy attention and investment, there is a long way to go for smallholders to ensure food self-sufficiency. Agriculture is the base of our food, transformation to industrialization, climatic change control system. Agriculture is the soul of our sovereignty for development as well as poverty reduction for individuals and country level. In Ethiopia, population density is high and has been increasing and agricultural land has been decreasing because of fragmenting or converting it into residential plots. To meet the domestic food requirements, use of improved production technologies developed by research is come out to be important. Therefore, the goal of this study was to analyze factors that affect the performance of agricultural products in Amahara region national state and to determine the highly significant input factors for producing high and qualified agricultural outputs. Data regarding total agricultural outputs and its input factors in study area of Amahara region from 2010 to 2018 was obtained from Amhara national state branch of the Ethiopian institute of agricultural sector. Correlation analyses were used to examine the strength of the relationship between each of the determinant factors with total agricultural output, while multiple regression analysis was employed to examine the simultaneous effects of several independent variables on the dependent variable, total agricultural outputs. These analyses were employed through the packages R and Stata to achieve the main objectives of the study. All of the independent variables were highly correlated with the total agricultural output. The overall regression model was highly significant (p-value < 0.01) with F = 45.532. The R-squared value implies that 93.8% percent of the changes in average total agricultural outputs are successfully explained by the variables used in the model of this study. If we take model size into account, 91.8% percent of the variation in average total agricultural output was explained by the values of the independent variables. Specifically, among the independent variables irrigated land, fertilizer, improved seed and pesticides are the most significant factors for total products (p-value < 0.05).

Nodaway, Agriculture is the base of our food, transformation to industrialization, climatic change control system. Agriculture is also the base the society for development as well as poverty reduction for individuals and in country level. The current government of Ethiopia is highly involved in the agricultural sector and, through its developmental state theory, has put the highest level of investment into the sector [

Investment is one of the means of achieving agricultural development for the given appropriate strategy and favorable policy environment and the most volatile micro economic variable in which trying to achieve economic growth and development. We do not have strong observed growing faster than economic with strong state intervention [

Rapid population growth aggravates the problem of agricultural performance in the society where agricultural inputs like labor force, fertilizer, improved seed and pesticides are limited. Here is a considerable body of literature that favors the idea that agricultural growth serves as an engine of growth and that irrigation-led technological changes are the eye drivers behind the growth of productivity in the agriculture sector in Asia [

But, in Ethiopia, the ultimate goal of Agricultural Development Led Industrialization (ADLI) strategy is for the industry to take the lead.

Due to these limitation land productivity is stagnating, technological development is at rudimentary stage, and resource distributions are quite uneven.

Economists traditionally have analyzed the agricultural development in terms of its relationship to the growth of overall economy. While the physiatrists, Viewed agriculture as the engine of growth angling surpluses large enough to stimulate growth order sector of economy. On the other hand the classical economists believed that the diminishing of marginal returns to agricultural land would eventually lead to overall economic stag-nation or the stable condition [

The goal of this study was to analyze factors that affect the performance of agricultural products in Ethiopia particularly in Amhara regional state. The state of Amhara is located in the north western and north central part of Ethiopia. The State shares common borders with the state of Tigray in the north, Afar in the east, Oromiya in the south, Benishangul/Gumuz in the south west, and the Republic of Sudan in the west. Amhara is topographically divided into two main parts, namely the highlands and lowlands. The highlands are above 1500 meters above sea level and comprise the largest part of the northern and eastern parts of the region while the lowland part covers mainly the western and eastern parts with an altitude between 500 - 1500 meters above sea level. The annual mean temperature for most parts of the region lies between 15˚C - 21˚C. The State receives the highest percentage (80%) of the total rainfall in the country. The highest rainfall occurs during the summer season, which starts in mid-June and ends in early September.

This study was basically conducted in order to determine the highly significant input factors for producing agricultural outputs and also to determine the type of relationship exist between the dependent and the predictor variables in the case of Amahara National state. In the process data regarding total agricultural outputs and its input factors with study, from 2010 to 2018 was obtained from Amahara state of the Ethiopian Institute of Agricultural Sector. Correlation analyses were used to examine the strength of the relationship between each of the determinant factors with total agricultural output, while multiple regression analysis was employed to examine the simultaneous effects of several independent variables on the dependent variable total agricultural outputs. These analyses were employed through the packages R and Stata to achieve the main objectives of the study.

The study design that were employed was specific time data based on the number of out relines from (2010-2018). The area where the study would cover was Amahara state and data used for this study were obtained from Amahara National state Agricultural office, Northern part of Ethiopia. In this study, the dependent variable was the variable that measures the performance of agricultural products in the case of Amahara National State and Agricultural output which is expressed in terms of quintal per hectare was used as the response variable.

Also, five potential explanatory variables were considered in this study. The descriptions of these covariant are presented in

S/N | Variable | Description |
---|---|---|

1 | GDP | Agricultural output expressed in terms of quantal per hectare |

2 | Fertilizer | The amount of fertilizer used per hectare |

3 | Labor force | The number of individual person used for work |

4 | Improved seed | The type of seed used |

5 | Irrigated land | The size of land which was irrigated |

6 | pesticides | The amount of pesticides in litter per hectare to protect disease |

Pearson correlation coefficient measures the linear relationship between the dependent variable and the independent variables. The correlation between any two variables always lies between −1, 1 and 0. If r is −1, this figure indicates that the dependent and the in-dependent variables have absolutely negative relationship while r is 1 showing the existence of absolute positive relationship. But correlation coefficient of 0 implies that there is no any linear relationship between dependent and independent variables.

Regression analysis consists of techniques for modeling the relationship between a response variable and one or more explanatory variables or predictors and it answers questions about the dependence of a response variable on one or more predictors, including prediction of future values of a response, discovering which predictors are important, and estimating the impact of changing a predictor or a treatment on the value of the response. Consequently, this leads to use the multiple linear regression model in order to achieve the main and specific objectives of the study. Many methods have been developed to determine various parametric relationships between response variable and independent variables. These methods typically depend on the form of parametric regression function and the distribution of the error term in a regression model. Generally, most regression models are written as a function of predictor variables and random error.

Y i = f ( x 1 , x 2 , ⋯ , x k ) + ε i (1)

where k is the number of repressor’s that are involved in the regression model, Y_{i} is the additive random error term and X i = ( x 1 , x 2 , ⋯ , x n ) is a function that describes the relationship between y and x 1 , x 2 , ⋯ , x k .

The parameters need to be estimated so that the model gives the best t to the data. These parameters are estimated based on least squares method principle. In this study the least squares principle was utilized to derive estimates of the regression parameters. Suppose that n ≥ k observations are available, and let Y_{i} denote the i^{th} observed response and X_{i} denote the i^{th} observation or levels of repressors X_{i}. Then the simple linear regression model of our study becomes:

y i = β 0 + ∑ i = 1 n ∑ j = 1 k β j x i j , k = 1 , 2 , 3 , 4 , 5 (2)

where,

Y = [ y 1 y 2 ⋮ y n ] , X = [ 1 x 11 x 12 ⋯ x 15 1 x 21 x 22 ⋯ x 25 ⋮ ⋮ ⋮ ⋮ 1 x 51 x 52 ⋯ x 55 ] , β = [ β 0 β 1 ⋮ β k ] , ε = [ ε 1 ε 2 ⋮ ε n ]

The least squares principle for the multiple linear regression model is to find the estimates of the regression parameters such that the least squares function is small as possible. This least square regression function is determined by:

S ( β ) = ∑ ε i 2 ^{ }

S ( β ) = ε ′ ε ^{ }

S ( β ) = ( y − x β ) t ( y − x β ) (3)

Using the concepts of calculus (matrix differentiation), the value of that minimizes the function S(β) is ( x t x ) − 1 x t y . Thus, the least square estimator of β is given by:

β ^ = ( x t x ) − 1 x t y (4)

with the variance-covariance matrix of var ( β ) = δ 2 ( x t x ) − 1 .

All statistical procedures and results extracted from such analysis are valid and have meaning only if the standard regression assumptions (linearity, non-stochastic repressors, no multi-linearity, zero mean error, no autocorrelation and normality) are satisfied. When these assumptions are violated, the standard results quoted do not hold and an application of them also lead to serious error. In addition, gross violations of the assumptions lead to an unstable model in the sense that a different sample could lead to a totally different models with opposite conclusions. The regression assumptions should be checked before drawing statistical conclusions from the analysis because the validity of these statistical procedures hinges on the validity of the assumptions. These assumptions are diagnosing using plot of standardized residuals against each of the predictor variables should be a random scatter points in the test of linearity, Plots of the standardized residuals against the predictors or against the fitted values are not only helpful to study whether a linear regression function is appropriate but also to examine whether the variance of the error terms is constant and using the a formal test of the Breusch-Pagan test for detecting the assumption of homoscedasticity. The most common measure of collinearity is the variance inflation factor for the j^{th} regression coefficient VIF_{j}. The link between VIF_{j} and collinearity (of the standardized and centered variables) is through the relationship

V I F j = 1 1 − R j 2 (5)

If R j 2 equals zero (i.e., no correlation between x_{j} and the remaining independent variables), then VIF_{j} equals 1. This is the minimum value of variance inflation factor. A VIF value greater than 10 is an indication of potential colinearity problems [

The total agricultural products consist of 9 subsequent year’s data from 2010 up to 2018. From this the statistical analysis results are presented in the graph below. From

2010 to 2018. In half of 2011 the total products starts to decline and reaches minimum point in 2013, this is basically due to different reasons like change in policy in government, instability of country in poetics, draught and hence the agricultural sector cannot increase the output productions.

But after 2013 Starting from 2014 the total product starts to increase continuously throughout the year with a small decrement within the given years. From this we can understand that the total product is varying in different year. This variation is due to the use of different amount of basic input factors in different years (like improved seed, fertilizer, and irrigated land size). Examination of the results do not reveals any series violations of the assumptions. Thus, the usual interpretations of regression analyses are valid since all assumptions concerning the data were met.

Based on the shapiro-wilk normality test (W = 0.9479) with a large p-value (p = 0.3106), shows the residuals satisfy the normality assumption. Furthermore, we can see that the graph of normal Q-Q plot (the theoretical quintile’s against the sample quintiles’) from

Since VIF is a measure of how much the variance of the estimated regression coefficient β is inflated by the existence of correlation among the predictor variables in the model. A VIF of value less than 10 means that there is no correlation among the k^{th} predictor and the remaining predictor variables, and hence

the variance of β is not inflated at all. From the result of

In regression, this partial correlation could be found by correlating the residuals from two different regressions: one is we predict y from x_{1}, x_{2}, x_{3}, x_{4} and x_{5}, and secondly, we can also predict x_{3} from x_{1} and x_{2}. Basically, we correlate the parts of y and x_{3} that are not predicted by x_{1} and x_{2}. According to

After the overall test of model assumptions, the multiple linear regression model of the total output production over the significant explanatory variables was modeled based on the estimated values of the parameter, based on the individual t-test for the significance of the individual predictor variables, based on the statistical results of

The fitting linear regression model that relating output product with the explanatory variables is given as:

Y = − 219625.734 + 46.882 x 1 + 94.03 x 2 + 21.63 x 3 − 151.119 x 4 + 0.427 x 5

where x_{1}, x_{2}, x_{3}, x_{4}, and x_{5} are the effect of pesticides, improved seed, labor force, fertilizer and irrigated land respectively. The model parameters were interpreted

Variables | Pesticides | Irrigated land | Improved seed | Labor force | Fertilizer |
---|---|---|---|---|---|

VIF | 4.747158 | 6.395043 | 2.100014 | 1.170496 | 1.393434 |

Effect | Estimate | Std. error | t-value | p-value |
---|---|---|---|---|

Intercept | −219,625.734 | 1,996,540 | −0.11 | 0.289 |

Pesticides | 46.882 | 21.221 | 2.209 | 0.043 |

Improved seeds | 94.030 | 34.762 | 2.705 | 0.016 |

Labor force | 21.630 | 47.777 | 0.452 | 0.657 |

Fertilizer | −151.119 | 43.682 | −3.460 | 0.00 |

Irrigated land | 0.427 | 0.100 | 4.27 | 0.001 |

R-square: 0.938.

as follows. The figure β_{1} = 46.882 indicate that when the use of pesticides increased by one litter per hectare the total product is also increased by 46.882 quintal where other effects are held constant. The figure β_{2} = 94.03 also shows keeping other input factors constant, the total output production is increased by 94.03 quintals for every one quintal addition of improved seed. Similarly, for a unit increase in one hectare of irrigated land, the total agricultural product will increased by 0.427 quintal in similar way, β_{4} = 151.119 reflects when the use of fertilizer increased by one quintal the total product decreased by 151.119 quintal. In fact this is not surprising because the used fertilizer might not be comfortable with the soil and it may reduce the total production output. Furthermore, the amount of used fertilizer might be excess (dose) and hence it may reduce the total production due to the acidic behavior of the fertilizer. The coefficient of determination is 0.938 from

The explanatory study assessed the determinant factors for the performance of agricultural output production in Amahara regional state of the country, to make relevant recommendations about how other nonagricultural sectors transformed to agricultural sector. The discussion is centered on the most important findings in the importance of labor, the size of the irrigated land, fertilizer, improved seed and pesticides on the total output production. The econometric result analysis reveals that the relation-ship between fertilizer and output, labor force and output, irrigated land and output, pesticides and output as well as improves seed and output. Among this relations, irrigated land, pesticides, fertilizer and improved seed had a significant relation to output products with positive effect while has fertilizer had negative effect because of the soil in Amahara region has organic fertilizer, this is why fertilizer has negative effect on output production. Finally this study reveals the most important factors for agricultural output are: Irrigated land, fertilizer, improved seeds and pesticide were significant factors for agricultural out ensuring food security is a challenging endeavor, because of crop production of the region was affected by shallow soil which was very low in inorganic matter and extremely de deficient in nitrogen and phosphors. The average crop productivity (quintals/hectare) of the region is lower than the national average. In addition, the annual food grain consumption of the region is below the minimum daily requirement of 2400 calories per person. There are also many households in the list of the Productive Safety Net Program (PSNP) who are unable to fill the annual food requirements of their families.

The author is grateful to the Editor of Agricultural Sciences (AS) in Scientific Research Academic Publisher and anonymous referees for their helpful comments and suggestions on the earlier version of this article.

The authors declare no conflicts of interest regarding the publication of this paper.

Zeru, M.A. (2018) Assessment of Factors That Affect the Performance of Agricultural Production, in the Case of Amhara Region, Ethiopia. Agricultural Sciences, 9, 1058-1069. https://doi.org/10.4236/as.2018.98073