_{1}

^{*}

In this paper, a balanced assignment methodology is proposed in case of entity with more than 2 attributes. The Mahalanobis distance is a basic idea of MTS method as a distance indicator considering the correlation of entities in quality control techniques. This can be applied to ensure the balanced assignment, and utilized the Signal to Noise Ratio as a measure of classifying large groups with entities into many subgroups. In order to analyze the balanced assignment, the simulation is performed for a given example. Validations against simulation data establish the effectiveness of this approach.

Decision making process with multi-attributes is different from the well-known solution methodology, but the efforts are being made to improve it due to the difficulty of the optimization process. A mathematical model or an application methodology with a constraint such as a series of processes for finding an appropriate compromise among attributes that are in conflict with each other is modeled as a multi-criteria function, and its necessity is increasing. Among the methods of solving the multi-criteria function, the most commonly used approaches are the weighting method and the goal programming method. In the optimization process, weights or specific numerical goals should be set appropriately for each function using the mathematical programming approaches. However, if the parameter is wrongly selected, the burden of not obtaining the Pareto optimal solution certainly exists.

In the meantime, as a mathematical approach to multi-criteria problems, the constrained problem by using the distance and fuzzy measure is solved by Barron and Schmidt [

Clustering or assignment is one of the ways to classify large groups with many entities into many subgroups according to the given criteria. Clustering means a grouping method based on attributes of each entities and certain criteria, and the similarity among entities plays an important role. For example, if a group of students is divided into two groups based on height 180 centimeter, tall group and non-tall group, based on so called height attribute, a group is classified into a tall subgroup and a non-tall subgroup. And the classified two small groups are made a new characteristic, such as beanpole group and ordinary group.

In this study, the properties inherent in an entity are defined as attributes, and the properties representing a group are defined as characteristics. On the other hand, the assignment is a grouping method considering each attribute according to the purpose of subdividing them into many subgroups. The balanced assignment is a grouping method by matching the mean or variance of the attributes to make each subgroup similar. Therefore, the characteristics of the subgroup are disappearing. It is not difficult to solve the problem of the balanced assignment in case of an entity with less than or equal 2 attributes. However, to solve the balanced assignment problem where an entity has more than or equal to 3 attributes, is somewhat complicated, but various solution approaches can be proposed. In order to reduce the interaction due to the attribute in the entity which conflicts with each other, the first step is to simplify to the similar attributes taking into account the correlation between attributes, and it is a simple and surprisingly good way to expect good results. Secondly, to apply the suitable weights for each attribute is recommended as a good approach. Since the determination of weight is key issue, the opinions of experts in the field are required to estimate the weight.

In this study, the Mahalanobis distance instead of the Euclidean distance is applied to ensure the balanced assignment, and the SNR (Signal to Noise Ratio) is utilized as a measure of classifying large groups with many entities into subgroups. The Mahalanobis distance is a basic idea of the MTS method as a distance indicator considering the correlation of entities in quality control techniques. In addition, the SNR indicates the influence of each entities corresponding to the Mahalanobis space.

The paper is organized as follows. We review related work in Section 2. And the concept of balanced assignment is introduced in Section 3. In Section 4, an example to allocate multiple entities into many subgroups is presented and the result of the MTS method is checked by comparing it against the simulation result. Finally, Section 5 gives concluding remarks.

The solving approach to the balanced assignment is applying a special case of the well known clustering methodology. In this section, the MTS-related studies are introduced for the purpose of classifying large groups with multiple attributes into many subgroups.

Clustering algorithm is an algorithm that aggregates similar entity without prior knowledge of the entity. That is, after measuring the degree of similarity among entity, the classification is performed so as to form a cluster among the entity having the highest degree of similarity. Completing the classification by clustering, the similarity of the entity in the group is maximized, and the similarity between the groups is minimized. On the other hand, the classification by the balanced assignment results in that the similarity of the entity in the group is minimized and the similarity between the groups is maximized. The nearness between the entities is usually measured by the specific distance measure such as the Mahalanobis distance and Euclidean distance [

The clustering methodologies can be divided into hierarchical, density based, grid based, and model based methods. The hierarchical method is a method of hierarchically classifying and clustering a given set of entities using the tree structure, and there are a bottom-up method and a top-down method. A density based method is about forming clusters based on density, which provides an efficient clustering method for objects with multidimensional and spatial attributes. The grid based method divides a set of entities into a finite number of cells to form a structure, and all clustering operations are performed on this grid structure. Since the performance of this method depends on the number of divided cells in each dimension, the time efficiency decreases as the dimensionality increases and the number of cells increases. Finally, the model-based method is a method that finds the optimal combination between the model and the given entity using a special mathematical model.

The Euclidean distance as shown in

of the attributes that an object is inherent are consistent. The Euclidean distance is defined as the shortest distance connecting two points. For example, the distance of two points A (x_{1}, y_{1}) and B (x_{2}, y_{2}) in two dimensions is expressed as E D A B = ( x 1 − x 2 ) 2 + ( y 1 − y 2 ) 2 . Simply, this is a basic distance measurement in which the correlation between attributes is not considered.

On the other hand, the Mahalanobis distance is already known as an effective way to simply compare between groups with well-known characteristics and those who are not familiar with the characteristics [

As seen in

M D r s = [ ( x r − x s ) S − 1 ( x r − x s ) t ] 1 / 2 (1)

In (1), M D r s denotes the Mahalanobis distance between entity r and entity s. And also S − 1 denotes the inverse matrix of the covariance, and ( x r − x s ) t is expressed as the transpose matrix of ( x r − x s ) .

The difference between the Euclidean distance and the Mahalanobis distance is that the Euclidean distance is used when all attributes are measured in the same unit and are independent. On the other hand the Mahalanobis distance is applied the covariance matrix as a multivariate measure based on the correlation between attributes. The Mahalanobis distance is effective when the units of attributes are different and there exist the correlation between attributes.

The orthogonal array table is designed to be able to model experimental designs that can reduce the number of experiments. In experimental design, many factors need to be considered in order to reduce product defects or to minimize the dispersion of quality, so that the orthogonal array table can be usefully accessed in this environment. The orthogonal array table detects the main effects and the two-factor interactions, which seem to be technically feasible in case of large number of factors, and reduce the number of experiments at the expense of high-order interactions, which seem technically absent. The orthogonal array table has some advantages of ease deployment such as fractional factorial design, split-plot design, compounding method etc., while reducing the number of experiments. And it helps easy to calculate the factorial variation and can includes many factors without scaling-up the experimental design itself.

In general, 2-level orthogonal array table and 3-level orthogonal array table are used the most, even though the orthogonal array table has 2, 3, 4, 5 level system and mixed level system. The orthogonal array table of the two-level system is represented by L 2 n ( 2 2 n − 1 ) , and the three-level system is represented by L 3 n ( 3 ( 3 n − 1 ) / 2 ) . Here, the orthogonal array table is expressed using the Latin square, where n is an integer with greater than or equal to 2. And 2 n , 3 n mean

the volume of the experiments, and finally 2 n − 1 , ( 3 n − 1 ) 2 represent the number of columns.

The SNR is the measurement used to describe how much desired sound is present in an audio recording, as opposed to unwanted sound (noise). This nonessential input could be anything like electronic static from your recording equipment, or external sounds from the noisy world around us, such as the rumble of traffic, or the murmur of voices in the background. In quality engineering, the SNR is used with the loss function of the Taguchi method. This loss function formulation is influenced by the type of quality characteristic under consideration, that is, the smaller-the better, the larger the better, or the nominal the better. Furthermore, based on the selected type of quality characteristic, a performance measure is defined. Such performance measures like the SNR are used to determine optimal settings of the controllable factors.

In the Taguchi method [

F ( y ) = k 1 y 2 ,

since the larger the value of attribute like quality, the better the product is. Finally, the loss function of the smaller the better is opposite to that of the higher the better. This means that the smaller the characteristic value such as the defective rate and vibration, the better. Generally, the loss function is given by F ( y ) = k y 2 . The SNR for the smaller the better is sometimes used by attaching a negative number to convert into good value such as that of the nominal the better or the higher the better in case of having very small value.

In this section, the differences between the clustering methodology and the balanced assignment are explained with respects of mathematical objective. The Orthogonal array tables and SNR are needed in the process of applying the MTS method to the balanced assignment problem.

To classify a large group with single attribute into several subgroups in terms of holding the similarity, it is possible to apply simple idea by distributing them sequentially after sorting the value in ascending or descending order. Even though many characteristic indicators to prove the equivalence of subgroups, the assigning criterion is to consider the average of subgroup and the variance representing quality index. A better result can be obtained by removing outlier before assigning.

In the case of having entity with two attributes, the method of solving the problem of balanced assignment is somewhat similar as the previous concept, but it is a bit more complex to approach in 2 dimensions. It is also effective to eliminate outlier in order to achieve the better balanced assignment. The quartile is used to remove the outlier in the same way in entity with a single attribute. The only difference is that since an entity with two attributes is expressed as a point that meets in the X axis and Y axis on the coordinate, the point deviated from the quartile in each axes is regarded as outlier or anomalies. It is difficult to devise a method of balanced assignment that effectively distributes the outlier because the oddity cannot be assimilated with any group.

After removing outlier, data conversion is performed to each group of attribute. Data conversion is a statistical process to provide a kind of reference point for comparing two or more different groups. Various data conversion approaches are applicable depending on the subject of comparison. For example, it is possible to analyze the inherent attributes through data conversion when there is way to compare, even if the attributes of different groups are considered the same. The simplest data conversion is the mean conversion which harmonizes each other’s mean. The mean conversion is to equalize the attributes simply by making the mean of the group same. The more progressive data conversion is to use the mean and the variance together. The standard normal conversion is also applicable if and only if the attributes of groups’ data follows standard normal distribution. For a random variable of a data group, suppose that X ( μ , σ 2 ) has normal random variate with mean, μ and variance, σ 2 respectively. The data in X can be transformed into a new set of data using the simple statistical approach such as the data conversion. The data conversion is applied to the data comparison among attributes, since the parameters and units that represent data group are different, so that they can be compared with each other. That is, x i j is converted to y i j indicating the degree of distance from the average in (2).

y i j = ( x i j − x i . ¯ ) σ i . (2)

As seen in (2), x ¯ i . denote the average of the entity group i. The data of two groups seem to be different before converting data, but it can be proven that those are visually not exact but similar shape after the conversion. And also the minimum value of each attribute is subtracted from all attributes, so that it becomes a starting point on the X axis and the Y axis respectively after data conversion. As seen in

In order to classify a lot of points in the scatter plot into many small bundles, the line is drawn with regular intervals as seen in

One of the methods on solving a complicate balanced assignment such as an entity having more than 2 attributes is to apply the concepts of the MTS method.

The MTS method is not a new concept but rather a way of combining Dr. Taguchi’s concept of quality engineering with the concept of the Mahalanobis distance, a pattern recognition method created by Dr. Mahalanobis. The MTS method should define the Mahalanobis space first. The process of defining the Mahalanobis space begins with the selection of reference entities and other entities to calculate the Mahalanobis distance. This selection is generally effective in clustering by selecting entities with more or less extreme attribute values rather than selecting entities that are close to the average. This is because, when the data of the attribute has a general and normal distribution, if the entity closer to the average is defined as a Mahalanobis space, the neighboring entities to the average are increased and the clustering effect is halved. Therefore, in this study, the Mahalanobis space is set up as the reference entity with the data having the extreme value among the attributes of the whole entity.

Secondly, in order to obtain the Mahalanobis distance, it requires some mathematical processes such as attribute standardization, correlation matrix, and inverse correlation matrix applying (1) and (2). The Mahalanobis distance must be preceded by getting an inverse matrix of covariance using correlation analysis prior to data conversion. However, the correlation matrix can be easily obtained, since the data conversion has already been completed in order to obtain the Mahalanobis distance. The correlation coefficient between attribute i and attribute j is already known as

r i j = σ i j σ i × σ j ,

and it becomes σ i = 1 , σ j = 1 in the standard normal data conversion. As a result, r i j = σ i j and the correlation matrix and the covariance matrix become the same. Using this inverse correlation matrix, the Mahalanobis distance between the Mahalanobis space i and entity j is calculated using (1).

The Mahalanobis space is defined as a reference space to measure the Mahalanobis distance for the purpose of clustering and classification. In general, the Mahalanobis space is a multidimensional space made up of entities of the Mahalanobis distance smaller than a certain number. Simply the Mahalanobis distance is interpreted as a distance calculation which converts multivariate data into a single numerical value. Since the correlation between attributes is considered, the Mahalanobis distance can be more accurately assessed for the quality of the multi-variate measures compared to the Euclidean distance. If the attributes to be compared are not correlated with each other that means independent each other, the Mahalanobis distance and the Euclidean distance are almost identical. However, in the analysis of multivariate data with correlation, the accurate distance estimation cannot be done with ignoring this correlation.

For designing purpose of the balanced assignment problem, the definite criterion to determine the Mahalanobis space is not specified, and it is determined by the subjective judgment of the designer himself. However, a systematic procedure for determining the Mahalanobis space is needed considering the importance of the design depth determined by the designer’s intention, since the optimal designing conditions determined through the MTS are greatly affected by the Mahalanobis space. Therefore, in this study, we have selected the Mahalanobis space as the entities with extreme values of each attribute, and applied it to the balanced assignment. In the MTS method, the SNR is used to determine the degree of affecting each attribute by the Mahalanobis space. This is a basic procedure to apply as an evaluation criterion by reducing the low impact characteristics and by selecting the high impact characteristics among the various characteristics affecting the Mahalanobis distance.

In this study, the assignment should be made to ensure that the characteristics of the subgroups are similar, and that the attributes included in the characteristics are also similar after assignment, assuming that the balanced assignments should be made taking into account all attributes specified in the entity. And all entities in the big group must be distributed and formed the specified number of subgroups. The SNR is obtained to determine the influence between each experimental entity and the Mahalanobis space. The Mahalanobis distance between the Mahalanobis space and the remaining entities is applied as a scale in this study. And the quadratic loss function for the smaller the better is used as seen in (3), since the smaller distance between the Mahalanobis space and the entity means the closer it is.

SNR = − 10 log ( 1 n ∑ i = 1 n y i 2 ) (3)

The orthogonal array tables are also used to determine which objects are closer to the designated Mahalanobis space, before computing the SNR. The size of the orthogonal array table is related with the number of entity given. On the orthogonal array table, 1 means that data is clustered and 0 means that the entity is not used. The fact that the lowest SNR value is selected to the cluster means that the closest entity is clustered. The smaller the SNR, the better it is. And by multiplying negative number, −1 to (3), it can be used as a feature of the higher the better.

In this section, an example to allocate multiple entities into several subgroups is presented for the validation purpose of the balanced assignment. The example is given by 30 entities and 3 attributes for each entity as shown in

The result of the MTS method is checked by comparing it against the simulation result, and followed by the appropriate analysis.

In order to apply the MTS method, it is necessary to define the Mahalanobis space that can be used as a reference entity. In this study, the entities having the most extreme value of each attribute are set as the reference entities, and those are the Mahalanobis space.

entity | attrib 1 | attrib 2 | attrib 3 | entity | attrib 1 | attrib 2 | attrib 3 |
---|---|---|---|---|---|---|---|

1 | 160 | 45 | 89 | 16 | 174 | 67 | 81 |

2 | 162 | 52 | 91 | 17 | 174 | 71 | 76 |

3 | 163 | 49 | 55 | 18 | 175 | 61 | 64 |

4 | 163 | 43 | 92 | 19 | 175 | 65 | 87 |

5 | 164 | 55 | 90 | 20 | 175 | 69 | 65 |

6 | 166 | 50 | 87 | 21 | 175 | 68 | 75 |

7 | 167 | 52 | 85 | 22 | 176 | 76 | 81 |

8 | 167 | 54 | 89 | 23 | 177 | 70 | 87 |

9 | 168 | 60 | 89 | 24 | 177 | 68 | 89 |

10 | 170 | 60 | 91 | 25 | 178 | 72 | 94 |

11 | 170 | 55 | 76 | 26 | 179 | 77 | 83 |

12 | 171 | 57 | 76 | 27 | 180 | 89 | 75 |

13 | 172 | 59 | 87 | 28 | 182 | 79 | 72 |

14 | 173 | 61 | 79 | 29 | 183 | 75 | 81 |

15 | 174 | 60 | 83 | 30 | 187 | 80 | 90 |

entity | attrib 1 | attrib 2 | attrib 3 | entity | attrib 1 | attrib 2 | attrib 3 |
---|---|---|---|---|---|---|---|

A | 160 | 45 | 89 | 10 | 172 | 59 | 87 |

B | 163 | 49 | 55 | 11 | 173 | 61 | 79 |

C | 163 | 43 | 92 | 12 | 174 | 60 | 83 |

D | 178 | 72 | 94 | 13 | 174 | 67 | 81 |

E | 180 | 89 | 75 | 14 | 174 | 71 | 76 |

F | 187 | 80 | 90 | 15 | 175 | 61 | 64 |

1 | 162 | 52 | 91 | 16 | 175 | 65 | 87 |

2 | 164 | 55 | 90 | 17 | 175 | 69 | 65 |

3 | 166 | 50 | 87 | 18 | 175 | 68 | 75 |

4 | 167 | 52 | 85 | 19 | 176 | 76 | 81 |

5 | 167 | 54 | 89 | 20 | 177 | 70 | 87 |

6 | 168 | 60 | 89 | 21 | 177 | 68 | 89 |

7 | 170 | 60 | 91 | 22 | 179 | 77 | 83 |

8 | 170 | 55 | 76 | 23 | 182 | 79 | 72 |

9 | 171 | 57 | 76 | 24 | 183 | 75 | 81 |

A | B | C | D | E | F | |
---|---|---|---|---|---|---|

1 | 0.923 | 16.714 | 5.357 | 7.175 | 13.000 | 19.582 |

2 | 1.124 | 16.120 | 5.273 | 5.865 | 11.364 | 17.337 |

3 | 1.710 | 13.008 | 0.677 | 4.936 | 19.578 | 10.751 |

4 | 1.926 | 11.718 | 1.159 | 4.710 | 17.950 | 10.244 |

5 | 1.277 | 14.575 | 1.512 | 3.388 | 15.655 | 10.369 |

6 | 1.825 | 15.863 | 4.712 | 3.304 | 9.833 | 12.452 |

7 | 2.437 | 17.571 | 2.967 | 1.682 | 12.929 | 8.419 |

8 | 5.357 | 7.754 | 3.696 | 7.249 | 18.937 | 9.992 |

9 | 5.537 | 8.016 | 4.016 | 6.601 | 17.684 | 9.214 |

10 | 4.239 | 15.538 | 2.161 | 2.356 | 17.216 | 5.659 |

11 | 5.409 | 10.435 | 3.978 | 4.241 | 15.308 | 6.815 |

12 | 6.749 | 14.542 | 3.321 | 3.837 | 19.740 | 4.855 |

13 | 4.792 | 12.147 | 5.886 | 2.607 | 8.731 | 7.497 |

14 | 6.526 | 10.567 | 10.448 | 5.499 | 4.500 | 12.315 |

15 | 13.935 | 6.552 | 11.220 | 13.807 | 22.822 | 12.700 |

16 | 5.567 | 17.112 | 3.909 | 1.203 | 14.245 | 4.112 |

17 | 10.444 | 5.171 | 12.690 | 10.514 | 9.661 | 14.078 |

18 | 6.611 | 9.117 | 7.596 | 4.705 | 9.118 | 8.441 |

19 | 7.926 | 16.267 | 12.439 | 4.330 | 2.826 | 11.831 |

20 | 6.622 | 18.496 | 5.873 | 0.653 | 11.189 | 3.875 |

21 | 7.122 | 20.256 | 4.990 | 0.670 | 14.579 | 2.892 |

22 | 8.575 | 17.936 | 10.242 | 1.868 | 5.762 | 6.252 |

23 | 12.966 | 13.172 | 13.237 | 5.702 | 8.530 | 6.573 |

24 | 13.664 | 20.115 | 9.738 | 3.547 | 17.053 | 1.511 |

In this study, the SNR is used to compare the influence between each entity and the Mahalanobis space, under the basic condition that all entities corresponding to each attribute should be considered and allocated. And finally, the SNR is applied as an indicator to ensure the similarity among subgroups. The quadratic loss function, the smaller the better, is applied as a comparative measure, since the smaller value in the Mahalanobis distance means that the distance between the Mahalanobis space and other entities is close. The orthogonal array table is developed before the SNR is obtained, and L 32 orthogonal table is used for the given example.

In the orthogonal array table, each column representing the entities to be assigned, is used to determine which cluster is closest to the Mahalanobis space. The L 32 orthogonal array table is not introduced in this study, since it is given as a basis of the experimental design. By applying (3), the SNR for the designated Mahalanobis space, is presented in

The shaded areas in

In this section, the result of simulation is shown by changing the assignment criterion, and comparing it against the result of the MTS method. And the results of other simulations with corresponding to the assigning criteria are shown in

As can be seen in

EN | SNR (A) | SNR (B) | SNR (C) | SNR (D) | SNR (E) | SNR (F) |
---|---|---|---|---|---|---|

1 | −16.993 | −23.123 | −17.152 | −14.784 | −23.049 | −20.049 |

2 | −14.589 | −22.400 | −14.499 | −15.397 | −23.946 | −21.010 |

3 | −14.123 | −23.404 | −16.325 | −14.135 | −22.273 | −21.457 |

4 | −16.564 | −24.252 | −16.501 | −12.740 | −22.853 | −20.824 |

5 | −15.437 | −22.858 | −15.939 | −14.867 | −23.202 | −20.656 |

6 | −17.168 | −23.332 | −17.118 | −14.272 | −23.352 | −20.598 |

7 | −18.497 | −22.638 | −18.460 | −16.466 | −23.066 | −21.036 |

8 | −16.920 | −23.669 | −17.760 | −15.335 | −22.740 | −21.028 |

9 | −17.294 | −23.752 | −17.064 | −12.892 | −23.040 | −19.047 |

10 | −15.034 | −21.329 | −15.597 | −15.714 | −23.575 | −20.984 |

11 | −16.313 | −23.082 | −16.923 | −15.443 | −23.313 | −20.638 |

12 | −18.508 | −22.932 | −18.434 | −15.947 | −23.000 | −20.160 |

13 | −14.672 | −23.706 | −14.476 | −12.748 | −23.051 | −19.719 |

14 | −17.624 | −23.040 | −17.962 | −14.656 | −22.370 | −20.141 |

15 | −18.324 | −23.455 | −17.786 | −15.517 | −23.162 | −20.262 |

16 | −17.172 | −23.321 | −18.170 | −15.539 | −22.001 | −20.539 |

17 | −16.727 | −23.084 | −17.788 | −14.449 | −22.637 | −20.261 |

18 | −16.496 | −23.433 | −16.415 | −12.792 | −22.901 | −19.565 |

19 | −17.950 | −22.868 | −18.099 | −15.960 | −22.864 | −20.367 |

20 | −17.307 | −22.643 | −16.879 | −15.407 | −22.982 | −19.786 |

21 | −17.622 | −23.601 | −16.598 | −15.540 | −23.551 | −19.498 |

22 | −17.516 | −22.840 | −18.100 | −15.397 | −22.576 | −20.085 |

23 | −16.861 | −23.071 | −17.546 | −14.032 | −22.274 | −19.614 |

24 | −16.583 | −23.460 | −16.773 | −12.791 | −22.793 | −19.618 |

25 | −17.447 | −22.755 | −17.025 | −15.235 | −23.914 | −18.761 |

26 | −18.180 | −22.877 | −17.162 | −16.141 | −24.238 | −19.017 |

27 | −16.406 | −23.268 | −17.009 | −12.086 | −22.625 | −18.681 |

28 | −16.563 | −22.875 | −17.151 | −14.050 | −22.771 | −19.036 |

29 | −17.414 | −23.340 | −15.426 | −14.768 | −24.182 | −18.363 |

30 | −18.154 | −22.241 | −18.547 | −16.470 | −23.452 | −20.116 |

31 | −16.041 | −23.030 | −16.821 | −12.063 | −22.104 | −18.694 |

32 | −16.840 | −23.212 | −17.545 | −13.984 | −22.672 | −19.805 |

subgroup criterion | attribute | subgroup 1 | subgroup 2 | subgroup 3 | difference | ||||
---|---|---|---|---|---|---|---|---|---|

mean | variance | mean | variance | mean | variance | mean | variance | ||

MTS | Att1 | 172.5 | 49.9 | 172.7 | 27.8 | 172.5 | 39.1 | 0.2 | 22.1 |

Att2 | 64.3 | 34.8 | 62.2 | 57.9 | 63.4 | 60.4 | 1.9 | 25.6 | |

Att3 | 81.3 | 44.2 | 83.4 | 40.3 | 81.2 | 61.9 | 2.1 | 21.6 | |

simulation | Att1 | 172.8 | 40.3 | 171.9 | 50 | 172.9 | 47.1 | 1.0 | 9.7 |

Att2 | 64.5 | 151.5 | 61.6 | 123.4 | 63.8 | 112.3 | 2.9 | 39.2 | |

Att3 | 81.6 | 68.5 | 83 | 99.5 | 81.3 | 92.2 | 1.7 | 31.0 |

Attribute 1 | Att1 | 172.8 | 56 | 172.4 | 44.5 | 172.5 | 41.8 | 0.4 | 47.4 |
---|---|---|---|---|---|---|---|---|---|

Att2 | 60.9 | 113.9 | 63.9 | 90.5 | 65.1 | 191.2 | 4.2 | 100.7 | |

Att3 | 84.8 | 74.6 | 81.7 | 65.6 | 79.4 | 121.4 | 5.4 | 55.8 | |

Attribute 2 | Att1 | 172.5 | 42.5 | 172.1 | 65.7 | 173.1 | 33.7 | 1.0 | 32 |

Att2 | 64 | 172.4 | 63.1 | 120.5 | 62.8 | 112.2 | 1.2 | 60.2 | |

Att3 | 85.2 | 47.7 | 86.3 | 23.3 | 74.4 | 110.7 | 11.9 | 87.4 | |

Attribute 3 | Att1 | 173.8 | 43.1 | 173 | 44.4 | 170.9 | 49.9 | 2.9 | 6.8 |

Att2 | 66.3 | 147.8 | 61.6 | 109.6 | 62 | 133.6 | 4.7 | 38.2 | |

Att3 | 81.5 | 124.5 | 82.4 | 74.7 | 82 | 78.2 | 0.9 | 49.8 |

In this paper, a balanced assignment methodology is proposed in case of entity with more than 2 attributes. The balanced assignment is a grouping method by matching the mean or variance of the attributes to make each subgroup similar. The Mahalanobis distance is applied to ensure the balanced assignment, and the SNR (Signal to Noise Ratio) is utilized as a measure of classifying large groups with many entities into subgroups. The Mahalanobis distance is a basic idea of the MTS method as a distance indicator considering the correlation of entities in quality control techniques.

Through the simulation, the statistical analyzing process is performed on the balanced assignment by the case study. The results of the MTS method are comparatively satisfied by comparing the result of the MTS method with the simulation results. Validations against simulation data establish the tightness of this approach. By considering that the characteristics of the group before allocating are different from those of subgroup after assignment, the basic approach is to try to equalize the mean of each subgroup, and also to try to evaluate the variance representing the quality index of the subgroup.

Finally, for designing purpose of the balanced assignment problem, the standard criterion to determine the Mahalanobis space is not specified, and it is determined by the subjective judgment of the designer himself. Therefore, a systematic procedure for determining the Mahalanobis space is needed considering the importance of the design depth, since the designation of this space is crucial for finding a better solution.

Rhee, Y. (2018) A Study on the Balanced Assignment of Allocating Large Group with Multiple Attributes into Subgroups. American Journal of Industrial and Business Management, 8, 1418-1432. https://doi.org/10.4236/ajibm.2018.86095