_{1}

^{*}

In a recent article [1] the author of this Part II proposed the parameter
Γ
_{H} for the acceleration expansion of the Universe, instead of dark energy, defining such parameter as
Γ_{H}=H^{2}⋅r(M/S^{2}) = a constant. A question about the expansive and constant acceleration of the internal levels of the Universe could be solved by equation ((3.10) ref. [1]) of the same article: Any assumed internal distance, lower than
r of (ref. [2]) implies a proportional change in the squared Hubble parameter, so maintaining the constancy of the
Γ
_{H} value for every stratum of the Universe. In the present work it is proved the constancy of the Hubble force by means of its generalized coordinates. As well, an equation to relate the Lagrange and the Hamilton functions is obtained for the Hubble field. Two concepts for both Hubble’s energy and tensor are also proposed. Finally, prior misprints of Part I, ref. [1], are corrected in the Appendix.

a) The Hubble field intensity, Γ H = H 2 r ( m / s 2 ) , (equation (2.1), ref. [^{−9} (m/s^{2}) which, at the present Hubble time of 4 × 10^{17} (s), gives the actual Universe expansion speed v = c.

b) The Hubble field potential is expressed as:

V H = H 2 2 r 2 ( m 2 / s 2 ) (1.1)

c) In the gravitational case, the Poisson equation is a concept that may be related to the Gauss flux Φ defined [

Φ = ∇ 2 V H 4 π G ρ M , (1.2)

r_{M} = the mass density. In the Hubble field case, it was shown in equation (4.3), ref. [

∇ 2 V H = H 2 ( s − 2 ) . (1.3)

They would be to clarify some of previous concepts and to add several Hubble new ones: the generalized force, the Lagrange-Hamilton equation, concepts on energy and a tensor.

In the gravitational field, the intensity and the potential are functions of mass. In the Hubble field it was necessary to apply the Hubble intensity and potential to the proper mass to get an idea of their magnitude since, anyway, it is by means of mass that the Hubble phenomena are perceived; i e, the movements of mass in the Universe would serve as well as a detector to determine the magnitude of the Hubble functions.

Since the intensity of the Hubble field is Γ H = H 2 r ( m / s 2 ) and if it may be applied as the acceleration of the total Universe mass M_{U}, this could be assumed as a factor of proportionality for the present value of Hubble force:

F H = M U Γ H (2.1)

A necessary condition to mix gravitational and Hubble parameters would be that F_{H} should be a constant of movement. To prove that, it will be applied the Poisson brackets criteria: The generalized expression of force is [

Q = Σ i F i ⋅ ∂ r i / ∂ q i (2.2)

The conservation equation, by means of the Poisson brackets, is:

or

d Q d t = ∂ Q ∂ t + 〚 ( ∂ Q / ∂ q i ) ( ∂ H / ∂ p ) − ( ∂ Q / ∂ p ) ( ∂ H / ∂ q ) 〛 , (2.4)

if Hamilton equations: p ˙ = − ∂ H / ∂ q and

Then, since the Poisson bracket = 0 in Equation (2.4), the function Q may be assumed to be a constant of movement:

∴ d Q / d t = ∂ Q / ∂ t . (2.5)

Being Q_{H} and therefore F_{H} a constant of movement it could be taken, as an example, that F H = M U ⋅ Γ H with a result F_{H} = 1.65 × 10^{46} (Newton). Since F_{H} has not been proved to be originated from any known physical entity, this example shows only the possible magnitude of the Hubble force F_{H}.

With regard to the first form of the Lagrange equation, the generalized force Q may be substituted by F, from Equation (2.2), and this one may also be substituted by the negative gradient of the potential energy, F = − ∇ U , as:

However, in the Hubble case, the force has been defined as the positive gradient of the Hubble potential energy,

F = ∇ U H . (2.7)

Otherwise, the Lagrangian scalar is defined as:

L = T − U (2.8)

being T and U the kinetic and potential energies. The Hamiltonian is defined as:

H = T + U (2.9)

Therefore, since U is not a function of the velocity 8_{i}, it is possible to write:

(this would be the Lagrange-Hamilton equation in the Hubble field).

Gravitational potential is an intrinsic property of mass, i e, mass constitutes the reference frame of the gravitational energy whose potential refers to the unitary mass. The Hubble potential becomes apparent in the presence of astronomical matter, though it does not seem to be generated by any known physical factor. It seems rather to be a quality of the empty space (i.e. the vacuum) defined as the absence of known matter in a determined system. Reference [

p v = α ρ v (3.1)

In the right side of this equation it is usually omitted the factor c^{2}. The value of α has been analyzed to confirm the possibility for dark energy, if α = −1 [

As well, reference [_{v} is proportional to the vacuum volume if the vacuum energy density r_{v} keeps constant:

d E v = ρ v d V (3.2)

The same equation could be applied to the Hubble energy E_{H}, as:

d E H = ρ H d V (3.3)

or E H = ρ H V (3.3 bis),

where r_{H} would refer to matter non detectable up to date.

The first theoretical approach to a Universe without matter was that of De Sitter, whose equation of general relativity for an empty Universe [_{v} is not necessarily 0.

The above mentioned characteristic of the Hubble energy (to exist without a mass frame) implies the possibility to have existed before the Big Bang.

Previous words would mean that the original Hubble energy is a potential one, able to be converted to kinetic energy in the presence of matter. That means that the detection and measurement of the Hubble energy require the presence of mass movements. The value of the present Hubble potential energy U_{H} could be estimated by the product of the Hubble field potential (Equation (2.1)) and the assumed mass M_{U} of the Universe:

U H = ( H 2 r 2 2 ) M U ( Joule ) , (3.4)

it gives a total value for U_{H} = 3.6 × 10^{72} (J). Though not formally deduced, this figure shows the potential energy that the Hubble field would imply to date.

Since the Hubble field intensity Γ_{H} (m/s^{2}) has the units of an acceleration, it has been directly associated to the Hubble force (equation (2.1)). As well, when Γ_{H} is integrated between 0 and r, it gives a squared velocity divided by 2, which represents the Hubble potential V_{H}. If this one is multiplied by the Universe mass, it gives an equation similar to a Hubble kinetic energy:

K H ( r ) = Γ H ⋅ r ⋅ M U 2 = ( H 2 r 2 2 ) M U ( Joule ) . (3.5)

Therefore, the total Hubble energy would be:

E H ( r ) = U H + K H = M U H 2 r 2 . (3.6)

The density of E_{H}is: ρ H ( r ) = 3 M U H 2 / 4 π r ~ 3.5 ( erg / m 3 ) (3.6 bis).

Equations ((3.4) and (3.5)) show that the Hubble potential energy and kinetic energy have the same value at a given position r. From those equations and (3.6) it seems to correspond to each one, at position r, 50% of the total Hubble energy. Obviously, all of that cannot really be similar to the gravitational case whose respective potentials have opposite signs. For example, in the gravitational case, the 0 value of the potential energy of a mass M corresponds to R(t) = ∞; the value at an initial position r_{1} it could be −U_{1}; at a lower position r_{2} it could be −U_{2}; at the observer’s position (r = 0) it is usually assumed that U_{o} = −∞; so, in the case of a falling mass from positions 1 to 2, the change in potential energy is:

Δ U = U ( final ) − U ( inicial ) = ( − U 2 ) − ( − U 1 ) = ( [ U 1 ] − [ U 2 ] ) < 0. (3.7)

Simultaneously, the increase in the kinetic energy, DK is equal to the difference in the modules of potential energy: Δ K = ( [ U 2 ] − [ U 1 ] ) > 0 .

Therefore, in the gravitational case, the increase in the kinetic energy of a falling mass comes from the decrease in its potential energy; otherwise, since kinetic energy may be generated by nuclear, chemical or electromagnetic potentials, it may also be, sometimes, converted to potential energy.

In the Hubble case, it will not be possible a falling situation since it exists, exclusively, the expansive one. So, the total Hubble energy given by Equation (3.6) should not be divided in potential and kinetic ones: it is a new form of energy that simultaneously appears as potential and kinetic. However, in Hubble and Newtonian fields, matter remains as the only field monitor.

The acceleration in a coordinate k, a^{k}, is the intrinsic derivative of v^{k}^{:}

a k = ∂ v k / ∂ t , it is a contravariant tensor, rank 1 (a vector). (4.1)

The Newton second law may be expressed for the invariant M as:

F = M ⋅ ∂ v k / ∂ t . (4.2)

In case that the Hubble force would be covariant, its module would be:

( F k ) H = ∂ U H / ∂ x k , (4.3)

since both U_{H} and (F_{k})^{H} are positive.

In a previous work [_{μν})^{Ʌ} from an equation given by reference [

R μ ν − g μ ν R / 2 − g μ ν Λ = 8 π G T μ ν . (4.4)

The two first terms are known as the Einstein tensor G_{μν}.

As mentioned above, the De Sitter model assumed that, in an empty Universe, the energy-momentum tensor would be 0; this means that:

R μ ν − g μ ν R / 2 = Λ g μ ν = ( T μ ν ) Λ (4.5)

The right side of this equation gives a definition of a possible Λ tensor. It would be then necessary to convert the Λ tensor term into a Hubble function, as it will be intended as follows: contraction of the last equation gives the scalar of curvature in the empty space:

R = 2 Λ ( s − 2 ) (4.6)

From ref. [

Λ = 3 H 2 (4.7)

The substitution in Equation (4.6) gives, for the scalar of curvature of the free space:

R = 6 H 2 ( s − 2 ) . (4.8)

A definition for the Hubble tensor, similar to that proposed for the Λ tensor, from Equations (4.5) and (4.7) would be:

( T μ ν ) H = g μ ν 3 H 2 ( s − 2 ) (4.9)

The scalar of the Hubble tensor is:

T H = 3 H 2 = Λ ( s − 2 ) (4.10)

Equation (4.9) may be substituted in Equation (4.5) to yet include an additional tensor (as proposed and later cancelled by Einstein) in the gravitational equation, now based on the better known, and measured, Hubble parameter:

R μ ν − g μ ν R / 2 = g μ ν 3 H 2 (4.11)

The main raison to include now a Hubble expansive term in the gravitational Einstein equation is that he tried to maintain static his equation by means of his cosmological term Ʌ, which was ignored by Friedmann and abandoned by Einstein when the Universe expansion was confirmed by Hubble. Today, since the original energy-momentum tensor was cancelled in the De Sitter model, the added expansive tensor (T_{μν})^{H} must now be (given the astronomical observations), in the same order than the Einstein tensor; it should be, therefore:

g μ ν 3 H 2 ( t ) − G μ ν > 0 (4.12)

starting from the critical time.

As it is known, the second term originated under the condition: div G_{μν}→ 0 at the Newtonian limit. From equation (4.9), divergence of the first term tends to 0 as r → ∞ since its divergence results reciprocal of r.

Otherwise, such as in the Λ case [

∇ 2 V H = H 2 = 8 3 π G ρ H ( s − 2 ) (4.13)

1) Previous results: are presented in this Part II, related to the Hubble acceleration constant Γ_{H}: a correction in the Appendix to equation (3.8, ref. [^{2} in the Hubble field, equation (4.4, ref. [

2) The Hubble force: it was analyzed by its generalized equation and it was concluded that Q_{H}, as well as F_{H}, are both constants of movement. As well, it was derived a new form of the Lagrange equation including the Hamiltonian in the Hubble field, equation (2.11). Otherwise, it would result that the Lagrangian = 0.

3) Energy: Initially, It was tried to define the Hubble energy in two parts: potential energy U_{H} and kinetic energy K_{H}. Since the last one gave the same equation than the potential energy, it will not be useful to consider the Hubble energy as behaving in identical form to that of gravitational energy: Equation (3.4) would give the value of the Hubble potential energy, which is always growing with distance r. Simultaneously the Hubble kinetic energy (equation (3.5) also grows in the same proportion, so implying that the Hubble energy has a very different nature than the gravitational energy. It is a new form of energy: it is continuously shown evident, and it would exist since the Big Bang epoch or before.

4) The Hubble energy density: it has been obtained an equation (3.6 bis) for the Hubble energy density. Its present value is about 3.5 (erg/m^{3}).

5) The Hubble tensor scalar: (T_{μν})^{H} has been defined as a covariant tensor, rank 2, proportional to H^{2}, Equation (4.9). Its scalar (T)^{H} is equal to the Λ magnitude.

6) The Hubble tensor in G.R.: it has been included in the gravitational equation (4.11), as a time function of the Hubble field tension, equation (4.12). As it is known, the divergence of the gravitational term tends to 0 in the Newtonian limit; however, the divergence of the Hubble term tends to 0 as r → ∞.

7) Other ways: obviously, the search for Dark Energy continues by new physical theories and experiments [

Juan, L.G. (2017) The Hubble Field vs Dark Energy, Part II: The Lagrange-Hamilton Equation and Some Concepts on Force, Energy and Tensors in the Hubble Field. Journal of Modern Physics, 8, 2159-2166. https://doi.org/10.4236/jmp.2017.813131

Under the exclusive responsibility of the author, in some discharges of the previous article, ref. [

a) It lacks the double point on the ä of equations (1.8 and 1.8 bis, [

b) In the right side of Equation (3.8) it lacks the denominator 2, i.e.:

V H = Γ H ⋅ r / 2 = H 2 r 2 / 2 ( m 2 ⋅ s − 2 ) (3.8, ref. [

c) The headings of figure 1 and table 1 appear sometimes blocked with a black bar due to the blue color applied in the original paper.