Makran zone is one of the largest accretionary wedges in the world. This research had used methods such as studies of Office and library, field observation and surveying that several field visits, sampling, registered structural evidence, Laboratory studies, Data analysis, interpretation and conclusions. The most important objective of this study is assessment of Tectonics and hazard Potential in Coasts the Oman Sea based on tectonics and sedimentology. The northward movement and subduction of Oman oceanic lithosphere beneath Iranian micro-plate at a very shallow angle and at high rate is responsible for active orogenesis and uplift. Detailed seismological and geological information in planning is extremely essential to avoid any disaster. It is to be remembered that seismicity does not remain fixed in an area but migrates slowly with time. Thus, the planners are expected to be more concerned with the building code and prevention strategies. It is also important to mention that the Coastal zones are always vulnerable to natural hazards and liquefaction. The geomorphology of an area is the first indicator of on-going tectonic activity. In order to measure the amount of deformation due to tectonic processes, the initial geometry of the geomorphic markers is reconstructed accurately. Study of sediments shows that abundant shell fragments organized in laminae also favor a storm origin. Storm deposits contain no internal mud layers and rarely contain pieces of mud. Maximum deposit thickness is near the shore, and landward thinning of the deposit is commonly abrupt. Storm deposits fill in topographic lows, and the upper surface is relatively uniform in elevation alongshore. Finally, landforms of tectonically active regions and sediments are controlling factors interactions between tectonic, sedimentary, climatic, and surficial processes.
The Makran Trench is the physiographic expression of a subduction zone along the northeastern margin of the Gulf of Oman adjacent to the southwestern coast of Balochestan of Pakistan and the southeastern coast of Iran. In this region the oceanic crust of the Arabian Plate is being subducted beneath the continental crust of the Eurasian Plate. Makran is one of the largest accretionary wedges on the globe, formed by the convergence between the Eurasian and the Arabian Plates. The Makran subduction zone has not been studied extensively, but the 1945 Mw 8.1 earthquake and subsequent tsunami, as well as more recent mid magnitude, intermediate depth (50 - 100 km) seismicity, demonstrate the active seismic nature of the region [
In a plate tectonic setting like that of the Makran Accretionary Complex of Oman Sea, a fairly high earthquake activity would be expected, as in many of the other major Accretionary complexes (subduction zones) around the world. But this region which is located between the Zendan-Minab Fault System and Oranch-Nal Fault Zone shows relatively low seismicity in comparison with the surrounding region. Better documented tsunami events in the Makran subduction zones are three, including two events of seismic origin, and one of unknown origin. The latest event is the major earthquake-generated tsunami of 1945 in eastern Makran that ruptured approximately one-fifth the length of the subduction zone [
The crossing points between Makran Subduction Zone and these oblique fault zones can be a location for occurrence of major earthquake activities. However, more studies are required for further clarification. In contrast to the east, the plate boundary in western Makran has no clear record of historical as well as instrumental great events. The large changes in seismicity between eastern and western Makran suggest segmentation of the subduction zone. In the Makran region, the Arabian Plate subducts beneath the Eurasian Plate at ~4 cm/yr. This subduction is associated with an accretionary wedge of sediments which has developed since the Cenozoic [
Tsunami deposits are difficult to identify in arid siliciclastic sand at coastal settings due to numerous erosive post-depositional processes acting on the sediment. The action of daily tides, wind driven waves, storm waves, and even localized processes such as bioturbation can potentially erase traces of these events from the sediment record in short periods i.e. 10 years or less [
The most important objective of this study is assessment of Tectonics and hazard Potential in Coasts the Oman Sea based on tectonic and sedimentology. Sea level is the common and unifying element of coastal tectonics. Present sea level, the universal datum for measuring elevation, is the most convenient reference for detecting ongoing vertical crustal movement and assessing short-term tectonic stability in coastal areas [
The study area between latitudes 25 degrees to 25 degrees and 45 minutes north and longitude 56 degrees 45 minutes’ lengths up to 61 degrees and 52 minutes north of the Sea of Oman and the north-eastern Sistan and Baluchestan province is located. From the perspective of geology of this area is located in this region, this region is structurally the two outer parts (coastal) and an internal split. The study area is located in the external part, the structure of the Makran coast all and area larger than the selected range (
Basic features of this section of Ophiolite, flyschfacies sedimentary deposits and non-exposed older rocks of the Cretaceous. Ophiolite complexes of the region,
more and more or less continuous strips are often outcrops along the main longitudinal fault. The fact that normal faulting occurs along the coast only suggests a trench-parallel structural discontinuity, which is not well understood [
The Makran accretionary complex is characterized by a number of features associated with escaping water and methane. Mud volcanoes are found onshore in both Iran and Pakistan, and cold seeps exist offshore for example Tang Mud volcano. The formation of an island (Zalzala Jazeera) after the 2013 Balochestan earthquakes is thought to be the result of a mud volcano. Many studies have documented the complex relationships between rock uplift and climatically-modulated erosion efficiency and discussed the respective influence of these driving factors on channel incision [
In this research had been used the following methods:
Office and library studies: At this stage, books, theses, articles, reports and geological maps related to the subject studied. Working as quantitative-qualitative methods (heuristic) and research-oriented and library studies such as research and scientific resources related to the topic of the previous studies and then collected and examined. Field Studies: At this stage contain field observation and surveying that several field visits, sample collection, registered structural evidence (photographed and documented in structural geology features) is done. That means three locations include Gowader, Chabahar, Konarak and Pozm were studied along the outcrop belt (Makran zone) in southeastern Iran. This study is based on 85 hand samples and 62 sediments samples that were collected from the study areas. Laboratory studies: In the other hand First, using aerial photographs and satellite images, using Google Earth and GIS, geological maps, topography, tectonic and seismic data was conducted. Data analysis, interpretation and conclusions: The initial processing by computer skills such as Excel and final processing using software was computed.
The geomorphology of an area is the first indicator of on-going tectonic activity. In order to measure the amount of deformation due to tectonic processes, the initial geometry of the geomorphic markers reconstructed accurately. Landforms of tectonically active regions reflect interactions between tectonic, climatic, and surficial processes [
Sediments were collected in coasts of Makran were selected based on the presence of the allochthonous bivalve tsunami bed (TB) found close to the surface or exposed in tidal creek sections. The shell unit could be traced along the tidal creeks (b80 cm) and in addition many test pits were dug checking the continuity of the unit. Of these test pits (60 - 650 cm deep), eight were selected to collect large samples of bivalves and eight short percussion cores were collected to document the detailed stratigraphy and continuity of the shell bed. Surface-elevation data were collected within the lagoon using a differential GPS (D-GPS) and interpolated to create a digital elevation model (DEM) of the surface topography.
The sedimentary characteristics of shell beds within an interpreted tsunami deposit from Lipar Lagoon, Oman were examined using shell taphonomy and high-resolution particle-size analysis.
Multivariate analysis of the particle-size data was conducted using Ward’s algorithm (which emphasizes minimal within-group variance [
Geology is the key to a meaningful inventory of past seismic activity, and from that, a long-term seismic hazards assessment. The data come from geomorphology, structural geology, sedimentology and from various geophysical records. Both primary (faults, fractures) and secondary (liquefaction, slides, tsunamis, etc.) evidence have to be considered. Ideally, a pale seismic event is recorded by multiple types of field evidence. Dating plays a central role in the establishment of a reliable chronology allowing meaningful seismic hazard assessment.
The region lies near the Arabian, Indian and Eurasian Plate boundaries (
eastern boundary of Eurasian Plate as it collided with Indian plate and other micro plates. The northward movement and subduction of Oman oceanic lithosphere beneath Iranian micro-plate at a very shallow angle and at high rate is responsible for active orogenesis and uplift [
The Makran Accretionary Wedge (MAW) is a consequence of the subduction of the oceanic part of the Arabian plate beneath Eurasia (Lut and Afghan blocks). The MAW extends about 1000 km from southern Iran to the Baluchistan of Pakistan. It is separated from the Zagros Mountain Belt, to the west, by the dextral Minab-Zendan Transform Fault and to the east it is restricted by the sinistral Chaman Transform Fault System (
Seismic profiles document large normal fault systems near the coast (
The Makran Accretionary Wedge exposed in Iran was a progressively filled turbidite basin between the Middle Eocene and Middle Miocene times [
shortening. Deformation shifted the active, submarine wedge southward after emplacement of the olistrostrome, and coastal Makran evolved into a wedge-top basin with shallower water and continental sedimentation [
Systematic mapping and direct dating on these surfaces were needed and excellent exposure conditions detectable from satellite images were encouraging. Semi-arid climatic conditions with disseminated, poor vegetation and minimal soil cover make the inland Makran an excellent application where remotely sensed data may be used effectively to decipher rocks, structures and landforms (
Detailed image of a mud volcano, its channel and chamber which is full of shale. Note the presence of a thrust fault associated with the mud extrusion [
evidence such as Steep Mountains 1500 m (Height), uplifted terraces, mud-volcanoes and bare desert coastline the reason is active tectonic in Makran regions (
Mud Volcanoes are well-known phenomena whereby fluid-rich, fine-grained sediments ascend within a lithologic succession because of their buoyancy. These processes have long been recognized as being related to the occurrence of petroleum, regional volcanic and earthquake activity, and orogenic belts. Most importantly, mud volcanoes occur along convergent plate margins where fluid-rich sediment is accumulated in deep-sea trenches at high rates. Such deposits then enter the subduction factory, where liquids and volatiles are released due to increasing compaction stress and temperature (
In summary, mud volcanism is most abundant in compressional and, to a lesser extent, in deltas of great rivers. As for the first, tectonic activity is an additional trigger to the buoyant driving mechanism. Fluid for mud volcanism is supplied from various sources, including meteoric and volcanic waters, pore water expulsion, hot springs, mineral dehydration reactions, and gas hydrate destabilization. In various areas the reasons for mud volcano formation are different. As a consequence, it is pointless to define a universal limited set of reasons. The expedient approach is to determine the key causative factors that can be used to forecast the areas of mud volcanic activity (
Excavated pit from the surface which was studied sediments. Paleotsunami deposits provide ability to extend the record of past tsunamis beyond recorded history and possibility of not only determining how often tsunamis occur in a given area, but also how large those tsunamis might have been. Tsunami sediments can be different from place to place, depends on the sediment source. Tsunami sediment forms a “blanket” of sand on land, often becoming thinner
landward, but more likely filling low spots and becoming thinner on high spots. Base of sediment shows erosion near the ocean but becomes purely depositional landward (
In study area many broken shells of the throgh shell bivalvia were observed along the coastline of the Oman Sea tidal flats in 2007 (Gono storm). Hence, a number of infaunal organisms that were left exposed on the tidal flat surface are likely to be swept away by the tsunamis (
In deposits shell of Bivalves fossils are impact chipping, stress fractures and angular fragments due to Shell to shell impacts and turbulent flow (
The presence of any articulated offshore bivalve species out of life position indicates a rapid catastrophic event (tsunami) rather than a more prolonged storm, which would not cause transport of shells over several kilometers [
Large storms have wide-ranging effects in a spectrum of environments from outer shelves to coastal plains. The most common deposits of storms in the rock record are sandstone beds deposited under powerful near-bottom water motions produced by waves and currents (
Tsunami deposits are generally less than 25 cm thick, extend hundreds of meters inland from the beach, and have an overall tendency to drape the preexisting landscape. They commonly consist of a single, homogeneous bed that grades from coarser grained at the bottom to finer grained at the top, or a bed with only a few thin layers. Mud clasts or thin layers of mud within the deposit are strong
evidence of tsunami origin. Twig orientation or other indicators of return (Seaward) flow during deposition of the sediment are also diagnostic of tsunami deposits. Tsunami deposits thicken and then thin landward, with a maximum deposit thickness typically more than 50 m inland from the beach because a zone of erosion commonly is present near the beach.
Storm deposits, in contrast, generally are more than 30 cm thick and will not advance beyond the low places they are able to fill in the preexisting topography. They typically consist of multiple lamina sets of extremely thin (less than 1cm thick) layers called laminae. Features that favor storm deposits are the types of stratification associated with the transport of sediment by rolling and bouncing along the bottom (foresets, climbing ripples, backsets), and numerous thin (millimeters to a few centimeters) lamina-sets of alternating coarse and fine grain size indicative of high-frequency waves [
The Makran subduction zone extends cross-strike 400 ± 600 km from the deformation front in the Oman Sea to the Baluchestan volcanic arc. Crustal phases are present on all lines, and are most pronounced on the southern stations. To the north a complex overburden increasingly attenuates the crustal phases. Field relations in the emergent part of the Makran accretionary prism show that a mid-Miocene to early Pliocene slope and shelf sedimentary sequence was deposited directly on abyssal-plain turbidites without any detectable stratigraphic or structural discordance. Sedimentological evidence for rapid shoaling, however, indicates that the underlying sediment column was tectonically thickened by a factor of between two and three during this period. This can be explained by large-scale under thrusting and under plating of sedimenta mode of accretion that is also favored by mass-balance considerations. The visible deformation in the coastal Makran occurred when the region was 70 - 100 km north of the contemporary prism front. The Makran Coastal Range is primarily made up of limestone and sandstone. It was formed when the northwestern Indian plate collided with the Asian plate (Figures 16-18).
Detailed seismological and geological information in planning are extremely essential to avoid any disaster. It is to be remembered that seismicity does not remain fixed in an area but migrates slowly with time. Thus, the planners are expected to be more concerned with the building code and prevention strategies. It is also important to mention that the Coastal zones are always vulnerable to natural hazards and liquefaction.
This region which is located between the Zendan-Minab Fault System and Oranch-Nal Fault Zone shows relatively low seismicity in comparison with the surrounding region. The faults which are hidden or invisible may trigger anytime, hence are a warning to the authorities, planners, developers, and the corporate sector and cannot be overlooked.
The Makran subduction zone extends cross-strike 400 ± 600 km from the deformation front in the Oman Sea to the Baluchestan volcanic arc. The Makran subduction zone can be the site of large earthquakes, as evidenced by the 1945 event. Recent developments in Plate Tectonics would suggest that there is no reason why the Makran would not feature events larger than the 1945 shock.
Semi-arid climatic conditions with disseminated, poor vegetation and minimal soil cover make the inland Makran an excellent application where remotely sensed data may be used effectively to decipher rocks, structures and landforms.
Excavated pit from the surface was studied sediments. Paleotsunami deposits provide ability to extend the record of past tsunamis beyond recorded history and possibility of not only determining how often tsunamis occur in a given area, but also how large those tsunamis might have been. Tsunami sediments can be different from place to place, depend on the sediment source. Tsunami sediment forms a “blanket” of sand on land, often becoming thinner landward, but more likely filling low spots and becoming thinner on high spots. Base of sediment shows erosion near the ocean but becomes purely depositional landward
Both tsunamis and large storms cause death and damage along low-lying coastal areas, and both occur with regularity, although tsunamis are much less frequent than coastal storms. Because of their infrequency, tsunamis are poorly documented in historical records for many of the areas where they pose a threat. In these areas, interpreting the geologic record may be the only way to discover the history of past tsunamis and the likely hazard from future tsunamis.
Ahrari-Roudi, M. (2017) A Study on Tectonic and Sedimentology in Order to Fault Rupture Potential in Coasts the Makran Sea. Open Journal of Geology, 7, 1269-1286. https://doi.org/10.4236/ojg.2017.79084