^{*}

This paper presents a modeling and an analysis of one-dimensional periodic structure composed of a cascade connection of N cells considered as infinite. The ABCD matrix representations with the Floquet analysis have been used to derive the dispersion relation and input impedance of infinite periodic structure. The transmission matrix for the N identical cascaded cells has been successfully used to obtain an efficient and easy-to-use formula giving the necessary number of cells such that they can be considered infinite. As an illustrative example, the formula is applied and verified to finite size TL periodically loaded with obstacles. Scattering parameters and the input impedance of the structure are expressed and plotted.

A periodic structure consists fundamentally of a number of identical structural components “periodic elements” which are joined together end to end or side by side to form the whole structure [1,2]. In fact, periodic structures are investigated in several applications in the electromagnetic engineering. For instance, these structures can be used to design frequency-selective surfaces [

In this paper, we investigate the various characteristics of finite and infinite (1-D) periodic structure by microwave techniques. The study of the infinite periodic structure is reduced to a single unit cell, Floquet theorem is invoked and both dispersion diagram and input impedance are obtained. For the case of finite periodic structure we suppose that a finite structure with a very large number of unit cell, can be considered as an infinite structure, using the transmission matrix for the N identical cascaded cells, a condition of convergence of the finite structure to an infinite structure is concluded. This convergence condition helps to find the minimal number of unit cell necessary such that they can be considered infinite. The accuracy and the efficiency of the proposed formula was verified to a finite size TL periodically loaded with obstacles, a scattering matrix analysis have applied input impedance and S parameters are calculated and plotted. Dispersion diagram, the stop and pass band property, the effect of changing geometrical parameters on the pass (stop) bandwidth, attenuation and phase constant are shown.

The periodic structure discussed in this paper is made of an infinite or finite repetition of a unit cell in one dimension. Each unit cell of this structure is characterized by its matrix chain; the study of the infinite periodic structure is reduced to a single unit cell as shown in

The foundations of periodic structure theory are developed in [_{cell}, B_{cell}, C_{cell}, and D_{cell}), we can write the matrix of the unit cell

The input impedance of the infinite structure Z_{in} can be found by modeling the structure as shown in

The parameters V_{N} and I_{N} are voltage and current corresponding to the propagating wave threw the n^{th} unit cell.

The parameter is the complex propagation constant of the periodic structure (where α_{p} is the attenuation constant and β_{P} is the phase constant) and L is the period of the structure shown in

Equations (2) and (4) give:

The resolution of (5) gives the dispersion relation. The input impedance of the structure is given by the resolution of (6)

By using Floquet analysis of an infinite periodic structure the feature of the overall system can be extracted by considering one single unit cell [

We consider a simple finite structure that is periodic in one dimension. The structure can be modeled by cascading its transmission matrix with two boundaries at the beginning and the end of the structure, as illustrated in

The unit cell of the periodic structure is considered reciprocal; its transmission matrix is given by (1), its determinant is equal to 1 (det(T_{cell}) = 1).

The transmission matrix of the N identical cascaded cells is given by:

D is the diagonal matrix formed by the eigenvalues of the matrix T_{cell}, P is a matrix consisting of the eigenvectors corresponding to the eigenvalues in D. The eigenvalues of T_{cell} are λ and µ which are given by:

By cascading N unit cell the matrix chains of the total structure can be written according to λ or µ.

The overall transmission matrix can also be written as [

The S parameters S_{11} and S_{21} associated with the entire structure shown in

Z_{ref} is reference impedance which is usually chosen 50 Ω and U_{N}_{–1} is a parameter defined by (12).

The input impedance of such a structure can be found in different ways. One way is to start from the last segment finding its input impedance which is the load impedance for the former segment and repeat the same procedure until the end. In addition, in ABCD matrix representation [

In the context of infinite periodic structure (infinite number of unit cells), both floquet theorem and continuous dispersion curve are usually used. For finite periodic structure (finite number of unit cells) and by raising the number of unit cells at the convergence we must have the same results as the case of infinite periodic structure. In this section we propose to find this finite number of unit cells which allow to show the same result as the infinite case.

We have if │λ│> 1 then 0 <│µ│ < 1 and vice versa. If N is very large and tends towards the infinite then by using (10) we have:

When N is very large the structure is considered infinite, we propose to find the value of N from which finished structure is equivalent to an infinite structure. By using (17) we can write if N very large then:

(21)

By developing this equality we obtain:

with E(x) is the integer part of x.

N is the number of cells necessary to consider the finite structure as an infinite one. It’s depending on the physical characteristic of the unit cell A_{cell} and D_{cell}. For any finite periodic structure modeled by scattering matrix we can determinate the sufficient number of unit cell to approach the infinite case, then by using this finite number we can approach easily the infinite case.

Dispersion diagram contains information regarding the wave properties of the structure and input impedance reflects properties of the structure from circuit point of view which depend on the cell parameters. For this reason another way to find the number of cells necessary such that structure can be considered infinite, is to start from finite structure in _{in} of the finite and infinite structure and continues to the convergence criteria. The algorithm displayed in

Convergence is considered to be reached if the difference between the input impedance of finite and infinite structure is less than 0.01%.

In order to verify the accuracy and efficiency of the proposed formula, we consider a finite-size TL periodically loaded with obstacles and constituted by the repetition of N unit cell. A unit cell is considered as a three part network one half (L/2) of the transmission line, the loading element JX and another half (L/2) of the transmission line as shown in

Therefore, the matrix of the unit cell can be obtained by cascading three matrix:

• First, the matrix of the half (L/2) of the transmission line.

• Second, the matrix of the element JX.

• Third, the matrix of the half (L/2) of the transmission line.

The transmission matrix of the half (L/2) of the transmission line is given by:

where γ the transmission line propagation constant, L is the length of the transmission line and Z_{c} is the transmission line characteristic impedance.

The transmission matrix of the element JX lumped shunt admittance is given by:

The matrix of the unit cell is given by:

In the lossless case we have

In this case, we use (5), (26) and (27) to define the dispersion relation of this structure as follows:

To simplify theses equations we pose:

and

Using (28) and (29), the attenuation and phase constant can be written as:

If a cell is reciprocal and symmetrical, the input impedance of the infinite structure is:

In (28) the attenuation constant is varying and the phase constant is fixed. For this equation if

the periodic structure supports a propagation waves, else

no wave can propagate along the periodic structure.

In (29) the attenuation constant and the phase constant is varying. For this equation if

is varying between –1 and +1, the periodic structure supports a non attenuated propagation waves. Else no wave can propagate along the periodic structure. The dispersion diagram is depicted in

To simulate the structure we can vary two parameters: the parameter (a = XZ/2) or the length of the unit cell (L). We present the results for several cases by varying (a) and L. The dispersion curve with attenuation is obtained by plotting G(f), the frequency ranges corresponding to G(f) larger than 1 indicate the pass band while the frequency regions with G(f) < 1 correspond to the stop band. For the dispersion curve without attenuation to have propagation G(f) should be between –1 and +1. The attenuation and phase constants were calculated and plotted. Simulations results show the presence of stop band and pass band. The attenuation and phase constants were calculated by using the two equations of dispersion. This agrees well with the stop and pass bands. The frequency ranges corresponding to the stop and pass

band depend on the physical configuration of the periodic structure (L) and the obstacle (JX).

The range of the frequency in

Using (22), we obtain N = 12 as a sufficient value to approach the infinite case. In order to verify this value we

a = 5.

have plotted the input impedance of the structure for several value of N (10, 12 and infinite).The examination of the curves on the various frequency bands show that the input impedance of the 12 unit cell has an excellent agreement with the input impedance of the infinite structure. The variation of input impedance (absolute value) over frequency for finite (N = 10, 12) structure is illustrated in

It is clearly observed that the input impedance of finite structure reaches the limit of corresponding infinite case,

if the number of unit cells is in order of 12.

The input impedance of a finite periodic structure is depicted in _{L}= 50 Ω.

By increasing the number of unit cells, the number of fluctuations will also increase which is illustrated in

In order to compare those results to those from scattering parameter calculation, the scattering parameters are displayed in

Infinite and finite periodic structures have been investigated. In the case of infinite structure, the Floquet theorem has been invoked, and both dispersion diagram and

input impedance have been obtained. By using scattering matrix and applying boundary conditions for the case of finite structure, both input impedance and S-parameters have been obtained and an efficient and easy-to-use formula to find the necessary number of unit cell for periodic finite structure to be equivalent of an infinite periodic structure has been presented. The formula is verified on a transmission line periodically loaded with obstacles. Simulation results have validated the proposed numerical modeling formula.