^{1}

^{1}

Multipe NSSS (Nuclear Steam Supply System) modules use the common feeding-water system to drive the common turbine power generation set. The SSFFN (secondary side fluid flow network) of MHTGR plant has features i.e. strong-coupling and nonlinearity. A wide range of power switching operation will cause unsteady flow, which may destroy the working elements and will be a threat for normal operation. To overcome those problems, a differential-algebraic model and PI controllers are designed for the SSFFN. In MATLAB\SIMULINK environment, a simulation platform is established and used to make a simulation of SSFFN of a MHTGR plant with two NSSS modules, which uses feedwater valves to control the mass flow rate in each module instead of feedwater pump. Results reflect good robustness of controllers.

As the fourth generation of nuclear power system, the modular high-temperature gas-cooled reactor (MHTGR) plant receives extensive attention from the world’s nuclear power industry due to its inherent safety and economic efficiency. As characterized by modularization and miniaturization, MHTGR uses helium as coolant and uses graphite as moderator and structural materials. Its fuel elements contain thousands of ceramic mould package particles. Its core outlet helium temperature can reach 700˚C - 950˚C [_{th}, a helium fan, a once-through steam generator and corresponding pipes. Steam generated by each NSSS flows into the same steam header and then flows into the steam turbine generator set after uniform mixed in the steam header. Because the two modules use the same feed-water system to feed the same steam turbine generator set, the secondary side fluid flow network (SSFFN) between the two modules has features e.g. strong-coupling, nonlinearity, etc. A wide range of power switching operation may cause unsteady fluid flow, which may destroy working components. In order to control modules coordinately and ensure MHTGR plant’s safety, it is meaningful to make a research on the dynamic characteristics of the SSFFN.

Fluid Flow networks (FFNs) widely exist in industrial engineering, e.g. mine ventilation, water supply and drainage system and oil gas industry, etc. [

In this paper, a differential-algebraic model of MHGTR plant’s SSFFN, based on Kirchhoff’s law and branch dynamics, and PI controller sensuring globally asymptotic stability are given. What’s more, a simulation platform was established, which can be used for simulation experiments on SSFFN, which has more NSSS modules.

From

Assuming that all flow dynamic parameters in pipes are evenly distributed on the radial cross section. Under the assumption, the flow in pipes can be seen as a one-dimensional flow. We can use the average values of dynamic parameters of the radial cross section and branch dynamic equation is deduced as Equation (1).

where Q_{j}, R_{j}, H_{j} and K_{j} is the mass flow rate, the resistance, the pressure drop, the inertia coefficient of the branch j, j = 1, ∙∙∙, N and N is the branch number of network.

Making a topology analysis on the structure of the SSFFN of MHTGR plant shown in right in

There are n + 3 nodes and 2 × n + 2 branches (including 1 pump branch) in this network shown in _{1}-Q_{n} representing 1#-n# NSSS module are links and the rest are trees. Branch Q_{n}_{+1} represents steam turbine generator set. Branch Q_{f} represents feedwater pump branch which is connected to the node 1. BranchesQ_{v}_{1}-Q_{v}_{n} represents feeding valve branches. Like an electrical network, the SSFFN must satisfy Kirchhoff’s current law (KCL) and voltage law (KVL) [

where

Based on Kirchhoff’s voltage law, we have

where

H_{f} is the pressure drop of the feedwater pump branch. H_{f} can be expressed as

where

From Equation (4), we can obtain the mass flow rates and pressure drops of the branch in the SSFFN, it is the differential-algebraic model of the SSFFN. If modules’ number n is given, it is clear that the topology of the SSFFN can be determined. So modules’ number n is important to determine the SSFFN dynamics.

In actual engineering, the mass flow rates and pressure drops should reach the expectation values. From Equation (4), a differential-algebraic model of the SSFFN has been established. R, K and H_{d} is the input of the model. We can adjust the opening of feedwater valves to change mass flow rates in the NSSS modules and control the main steam pressure drop of the steam turbine generator set by adjusting the pressuer head of feedwater pump. A PI control scheme based on above has been established and its structure can be seen in _{d} to control main pressure drop H_{n}_{+1} of the steam turbine generator set and controllers R_{vi} (i = 1,∙∙∙, n) to control mass flow rates Q_{i} (i = 1,∙∙∙, n) in NSSS modules.

To overcome the pipe sensor noise, a section of inertia link is added in controllers, which plays an role of low pass filter. Controllers shown in

In MATLAB\SIMULINK environment, the model has been implemented by using the programming language M code based on the principles of Level-2 S-Function. The model provides parameters interface in order to let users to define the number of NSSS modules and structure of the SSFFN. The users must input the parameters, such as the nodes’ number, the feeding-pump branches’ number, the rest branches’ number and the matrices of KCL, which depends on the number of NSSS modules, to initialize the model. The users can add other simulation modules to make real-time simulation.

In MATLAB\SIMULINK environment, the model has been implemented by using the programming language M code based on the principles of Level-2 S-Function (

This paper has made simulation of SSFFN of MHTGR plant, which has two NSSS modules and uses the common feedwater pump to feed for the two. In this network, the mass flow rate is controlled by the feeding valve, making topology analysis on the structure of the SSFFN and setting inertia coefficients of the branch excluding feeding-pump branch K as diag (0.1; 0.1; 0.1; 0.1; 0.1). To simulate the real operation ,conditions can be set as follow, the time of simulation t is 3000s,the initial value of pressure head of feedwater pump H_{d} is 25 Mpa, the resistance of branch R_{1}, R_{2}, R_{3}, R_{f} is 0.00118, 0.00118, 0.0038, 0.00044, the initial value of R_{v}_{1}, R_{v}_{2} is

0.00118, 0.00118. The main steam pressure drop of the steam turbine generator set remains 13.9 Mpa. A case study is given to show the performance of the model. In this case, the mass flow rate of 1#NSSS remains 96 kg/s in 1000 s, it will drop to 90 kg/s at 1000 s. Controller H_{d}: k_{p} = 1, k_{i} = 1; Controller R_{v}_{1}: k_{p} = 0.0001, k_{i} = 0.0001; The mass flow rates, pressure drops and control inputs are respectively shown in

The mass flow rate of 1#NSSS module, Q_{1}, is controlled by the feeding valves. The drop of mass flow rate is caused by the decrease of the valve opening, thus resulting in increase in the branches’ resistance and pressure

head of feedwater pump. Because of the controller, the main steam pressure drop, H_{3} remians the initial value. The results show good robustness of controllers.

The SSFFN of MHTGR plant has features, i.e. strong-coupling and nonlinear, because multiple NSSS modules use the common feedwater system to drive the same steam turbine generator set. A wide range of power switching operation may cause unsteady fluid flow in the network, which may destroy working components. This problem must be avoided in order to ensure the system’s safety. It is meaningful to make analysis on dynamics of the SSFFN. Branch dynamics and network’s structure features plays an important role in modeling SSFFN.

Base on KCL and KVL, this paper designed a differential-algebraic model for SSFFN. Based on the model, this paper designed PI controllers to promise the closed system globally asymptotically stable. In MATLAB\ SIMULINK environment, the paper made implementation of the model and designed a good human-machine interface for users to define the structure of the SSFFN at ease. To proof the model and the controller, this paper made simulation of SSFFN of a MHTGR plant which has two modules and uses one common feedwater pump feeding for the two. The results efficiently reflect the controllers’ good performance. The simulation platform established in this paper may help engineers to make integral coefficient test and choose the best one, which is actually based on engineers’ experiences. Also, the simulation platform can be used to control SSFFN of MHTGR plant which has more modules.

This work was supported in part by National S&T Major Project under Grant ZX06901, and in part by Natural Science Foundation of China (NSFC) under Grant 61374045.

Maoxuan Song,Zhe Dong, (2016) Dynamic Characteristics Analysis on MHTGR Plant’s Secondary Side Fluid Flow Network. Journal of Power and Energy Engineering,04,15-22. doi: 10.4236/jpee.2016.47003