We attempt here to understand successfully some crucial aspects of J/Ψ-production in some high energy nuclear collisions in the light of a non-standard framework outlined in the text. It is found that the results arrived at with this main working approach here is fairly in good agreement with both the measured data and the results obtained on the basis of some other models of the ‘standard’ variety. Impact and implications of this comparative study have also been precisely highlighted in the end.
The study of the J/Ψ-mesons in ultra-relativistic heavy ion collisions has consistently been considered to be a potentially powerful tool for studying the properties of the hypothetical ‘hot and dense matter’ created in these collisions. Predictions about the suppression of J/Ψ-meson production in the nuclear collision, at certain stages [
In the past, [3-5] we had constantly refrained from giving such undue importance to any controversy about either suppression/enhanced suppression or an enhancement of J/Ψ mesons in reality. Rather our primary intent would centre around understanding and interpreting the nature of data of inclusive cross-sections and some other important observables of J/Ψ mesons in BNL-RHIC and CERN-LHC experiments. In fact, we have an altogether different and heretic view (which will be outlined very briefly in the next section) about the mechanism of J/Ψ production in high energy particle and nuclear collisions.
We define our objectives here as: 1) to explain the main and major features of the latest data on J/Ψ-production in BNL-RHIC and CERN-LHC experiments from the proposed alternative approach built up by us in a set of previous works done in the both the remote and recent past [6,7] and 2) to compare our model-based calculations with some other competing models.
Our plan of work presented here is as follows. In Section 2, we provide brief outlines of the models chosen for this study. The Section 3 provides very brief outlines of the models which are founded on the gantlets of assumptions of the “Standard”-model and which have been reckoned with for the sake of comparison. In Section 4 we give the results and general discussion. And in the last section (Section 5) we offer the final remarks and the conclusions arrived at.
In the present work, we will make use of a theoretical model to interpret some of the latest and topical observables of the J/Ψ production which were measured and reported by the different groups in the Relativistic Heavy Ion Collider (RHIC) and Large Hadron Collider (LHC) experiments in the recent past. The model has a modest degree of dynamical basis and some prior check-ups with data [3-5]. It is called here as the sequential chain model (SCM).
The outline and features of the model we use here are obtained, in the main, from our previous works [3-5].
According to this model, high energy hadronic interactions boil down, essentially, to the pion-pion interactions; as the protons are conceived in this model as p = (π+π0ϑ), where ϑ is a spectator particle needed for the dynamical generation of quantum numbers of the nucleons. The multiple production of J/Ψ-mesons in a high energy proton-proton collisions is described in the following way. The secondary π-meson or the exchanged ϱ-meson emit a free ω-meson and pi-meson; the pions so produced at high energies could liberate another pair of free ϱ and trapped ω-mesons (in the multiple production chain). These so-called free ϱ and ω-mesons decay quite a fast into photons and these photons decay into Ψ or Ψ′ particles, which, according to this alternative approach is a bound state of or particles.
The inclusive cross-section of the Ψ-meson produced in the pp collisions given by
where the expression for average multiplicity for Ψ-particles in pp scattering would be given by
In the above expression, the term is a normalisation parameter and is assumed here to have a value 0.09 for Intersecting Storage Ring (ISR) energy, and it is different for different energy and for various collisions. The terms, x and represent the transverse momentum, Feynman scaling variable and the rest mass of the J/Ψ particle respectively. Moreover, by definition, where is the longitudinal momentum of the particle. The s in Equation (2) is the square of the cm energy.
The second term in the right hand side of the Equation (1), the constituent rearrangement term arises out of the partonic rearrangements inside the proton. It is established that hadrons (baryons and mesons) are composed of few partons. These rearrangements mean undesirable loss of energy, in so far as the production mechanism is concerned. The choice of would depend on the following factors: 1) the specificities of the interacting projectile and target; 2) the particularities of the seconddaries emitted from a specific hadronic or nuclear interaction and 3) the magnitudes of the momentum transfers and of a phase factor (with a maximum value of unity) in the rearrangement process in any collision. The parametrisation is to be done for two physical points, viz., the amount of momentum transfer and the contributions from a phase factor arising out of the rearrangement of the constituent partons. Collecting and combining all these, we propose the relation to be given by [
where denotes the average number of participating nucleons and values are to be obtained phenomenologically from the fits to the data-points [
In order to study a nuclear interaction of the type A + B → Q + x, where A and B are projectile and target nucleus respectively, and Q is the detected particle which, in the present case, would be J/Ψ-mesons, the SCM has been adapted, on the basis of the suggested Wong [
where, and c are the factors to be calculated under certain physical constraints. The set of relations to be used for evaluating the parameters is given below.
Here, in the above set of equations, the third factor gives a measure of the number of wounded nucleons i.e. of the probable number of participants, wherein gives the probability cross-section of collision with ‘B’ nucleus (target), had all the nucleons of A suffered collisions with B-target. And has just the same physical meaning, with A and B replaced.
Besides, in expression (5), the fourth term is a physical factor related with energy degradation of the secondaries due to multiple collision effects. The parameter occurring in Equation (5) above is a measure of the fraction of the nucleons that suffer energy loss. The maximum value of is unity, while all the nucleons suffer energy loss. This parameter is usually to be chosen [
In this approach [
The Quark Coalescence Model (QCM) [
A mechanism called double color filtering for dipoles [
Now let us proceed to apply the chosen model to interpret some recent experimental results of J/Ψ-production reported by various groups for different collisions like p + p, d + Au, Cu + Cu, Au + Au at RHIC and p + p, Pb + Pb at LHC. Here, the main observables are the invariant yields, rapidity distributions and the nuclear modification factors which would come under purview of the present work.
As the psi-productions are generically treated rightly as the resonance particles, the standard practice is to express the measured J/Ψ (total) cross-sections times branching ratio to muon or electrons, i.e. for lepton pairs, that is by.
By using Expression (4) we arrive at the expressions for the differential cross-sections for the production of J/Ψ-mesons in the mid and forward-rapidities (i.e. and respectively) in p + p collisions at = 200 GeV at RHIC.
for (6)
and
for (7)
For deriving the Expressions (6) and (7) we have used the relation [
are the transverse mass of the produced particles and the rapidity distributions. MeV [
In a similar fashion, the total inclusive cross-sections for the production of J/Ψ-mesons in different rapidities (i.e., and respectively) in p + p collisions at = 7 TeV at LHC would be,
for (8)
and
for (9)
For the calculation of the rapidity distribution from the Equation (4) we can make use of a standard relation as given below:
For p + p collisions, the calculated rapidity distribution equation at RHIC-energy = 200 GeV is
In a similar fashion, the SCM-based rapidity distribution equation at LHC-energy = 7 TeV in p + p collisions has been given hereunder
From the expression (4), we arrive at the invariant yields for the J/Ψ production in reactions for mid and forward-rapidities.
for (13)
and
for (14)
For the case of Cu + Cu most central collisions (0% - 20%) at RHIC, the SCM-based calculated theoretical invariant yields for the rapidities and are given by the following equations respectively;
for, (15)
and
for. (16)
Similarly, for Au + Au collisions at = 200 GeV at RHIC, the equations of transverse momenta spectra for 0% - 20% centrality regions are given by the undernoted relations.
for,(17)
and
for. (18)
For calculating the values of NR, in general, we have used the values of from Refs. [
There is yet another very important observable called nuclear modification factor (NMF), denoted here by which for the production of J/Ψ is defined by [
The SCM-based results on NMFs for Cu + Cu and Au + Au collisions for forward rapidities are deduced on the basis of Equation (6), Equation (15), Equation (17) and Equation (19) and they are given by the undernoted relations
and
herein the value of to be used is [
In Figures 1(a) and (b), we have drawn the total inclusive cross-sections for the production of J/Ψ-mesons in p + p collisions in different rapidities at RHIC and LHC energies = 200 GeV and 7 TeV respectively. The solid lines in the figures are depicting the SCM modelbased results with the help of the Equations (6)-(9) while the experimental measurements are taken from Ref. [19, 20] respectively.
In
Similarly, in
In
The experimental results for the invariant yields of J/Ψ production as a function of transverse momenta for Cu + Cu collisions at = 200 GeV are taken from Ref. [
In the
In
And in
200 GeV and for Pb + Pb collisions at = 2.76 TeV. The solid lines in the figure show the SCM-based calculations for different part>’s. The Values of part>’s are taken from Ref. [
Let us first concentrate on what we have achieved here: 1) The features related to pT—spectra for J/Ψ production in some particle-particle and nuclear collisions at various high energies have been reproduced quite successfully; 2) The characteristics of rapidity spectra in p + p collisions at TeV energies have been brought out somewhat modestly satisfactorily; 3) The features of nuclear modification factors in Cu + Cu, Au + Au and Pb + Pb reactions at RHIC and LHC energies have also been brought out with the help of the applied model. Besides, some of our model-based results have also been compared with the performances on the same observables by some competing models of “standard” variety. And these comparisons with data and the results obtained by some other models reveal that SCM-based results describe the features of the data, at least, not inferior to the performance by the other approaches grounded on the “Standard” model ilk. In the past such were the recurrent observations made by us valid for many other obsevables measured in the various high statistics high energy particle and nuclear experiments.
Thus, summing up our past experiences and consider-
ing the weightage of the results reported here, we are forced to comment finally that this work essentially represents a case of paradigm shift in the domain of particle theory, as we have eschewed the conventional views of approach to J/Ψ production in the “standard” framework. And this is just the reflection of our radical views about the particle structure and the nature of particle collisions. Obviously we obtain the fair agreement with data on some observables without inductions of 1) any QGP concept; 2) any prognosis of suppression or enhancement of J/Ψ-production. The production of J/Ψ- particles resembles all other hadrons.
The authors would like to express their thankful gratitude to the learned Referee for his/her valuable remarks and constructive suggestions in improving the earlier draft of the manuscript.