A rigorous model for the electron is presented by generalizing the Coulomb’s Law or Gauss’s Law of electrostatics, using a unified theory of electricity and gravity. The permittivity of the free-space is allowed to be variable, dependent on the energy density associated with the electric field at a given location, employing generalized concepts of gravity and mass/energy density. The electric field becomes a non-linear function of the source charge, where the concept of the energy density needs to be properly defined. Stable solutions are derived for a spherically symmetric, surface-charge distribution of an elementary charge. This is implemented by assuming that the gravitational field and its equivalent permittivity function is proportional to the energy density, as a simple first-order approximation, with the constant of proportionality, referred to as the Unified Electro-Gravity (UEG) constant. The stable solution with the lowest mass/energy is assumed to represent a “static” electron without any spin. Further, assuming that the mass/energy of a static electron is half of the total mass/energy of an electron including its spin contribution, the required UEG constant is estimated. More fundamentally, the lowest stable mass of a static elementary charged particle, its associated classical radius, and the UEG constant are related to each other by a dimensionless constant, independent of any specific value of the charge or mass of the particle. This dimensionless constant is numerologically found to be closely related to the fine structure constant. This possible origin of the fine structure constant is further strengthened by applying the proposed theory to successfully model the Casimir effect, from which approximately the same above relationship between the UEG constant, electron’s mass and classical radius, and the fine structure constant, emerges.
The electron is the most fundamental charged particle of nature [
In this paper, we model an electron using a proposed new theory, referred to as a Unified Electro-Gravity (UEG) theory. The theory attempts to unify the concept of the electric field surrounding a source charge, as defined by Coulomb’s Law or Gauss’ Law of electrostatics [
With a proper definition of the energy density associated with the non-linear UEG field, and a suitable relationship between the gravitational field and the energy density, the permittivity function surrounding a spherically symmetric surface-charge distribution may be solved, either analytically or numerically. Consequently, the total energy, or its equivalent mass as per special relativity, may be derived as a function of the charge radius. It is discovered that stable solutions, where the first derivative of the total energy with respect to the charge radius is zero, and the second derivative positive, are possible for certain discrete values of the charge radius. The derivation assumes a simple proportional relationship between the energy density and the UEG field, with the constant of proportionality referred to as the UEG constant. It may be reasonable to assume that the stable solution having the smallest possible mass/energy is associated with the mass/energy of an ideal “static electron” that does not spin around itself. Further, the mass of the static electron may be ideally assumed to be half of the total mass of an electron that includes its spin contribution. Accordingly, by reverse deduction, the UEG constant can be calculated, and is recognized as a new fundamental constant of nature. This is a significant fundamental development.
The new UEG constant is defined as the gravitational acceleration per unit energy density, carrying a dimension of (m/s2)/(J/m3). More significantly, a dimension-less constant relating the UEG constant, the stable static mass, and its associated classical radius, is identified which would apply to any basic charge particle, independent of the specific charge or mass of the particle. The value of this dimensionless constant is numerologically recognized to be closely related to the fine structure constant [
The possible origin of the fine structure constant, as suggested above, is further strengthened by applying the proposed UEG theory to model the Casimir effect [
A massive body in a gravitational field E ¯ g experiences a force F ¯ in a certain direction in space. In the theory of general relativity this force is seen as a result of curvature of the surrounding “free-space” [
We assume that the mass m or the equivalent energy W = m c 2 , where c is the speed of light in an isolated free-space, is inversely proportional to the permittivity ε , or directly proportional to ε _ = 1 / ε . This is in consistency with the energy W = q 2 8 π ε r q of a spherical surface charge q of radius r q , placed in a medium with permittivity ε .
ε _ ( r ¯ ) = ε _ 0 ε _ r ( r ¯ ) , ε = ε 0 ε r , ε _ = 1 ε = 1 ε 0 ε r = ε _ 0 ε _ r , ε _ 0 = 1 ε 0 , ε _ r = 1 ε r ; m ( r ¯ ) α ε _ ( r ¯ ) , m ( r ¯ ) = m 0 ε _ r ( r ¯ ) , m 0 = m ( ε _ → ε _ 0 , ε _ r → 1 ) , ε _ r = 1 ε r = ε _ ε _ 0 = m m 0 ; E ¯ g = F ¯ m 0 = − ∇ ¯ W ( r ¯ ) m 0 = − ∇ ¯ [ m ( r ¯ ) c 2 ] m 0 = − ∇ ¯ [ m 0 ε _ r ( r ¯ ) c 2 ] m 0 = − c 2 ∇ ¯ ε _ r ( r ¯ ) . (1)
Gravitational Field and Permittivity Function in a Region with Energy/Mass DistributionConsider the gravitational field produced by a body of mass of m 0 , as per the Newton’s Law of Gravitation, exerting a force on an external mass δ m 0 . The permittivity function around the mass m 0 may be expressed using the model (1) developed above.
F ¯ = − G m 0 δ m 0 r 2 r ^ , E ¯ g = F ¯ δ m 0 = − G m 0 r 2 r ^ = − c 2 ∇ ¯ ε _ r ( r ¯ ) = − c 2 ∂ ε _ r ( r ) ∂ r r ^ , ∂ ε _ r ( r ) ∂ r = G m 0 c 2 r 2 , ε _ r = 1 − G m 0 c 2 r , ε _ r ( r → ∞ ) = 1. (2)
The above result would be applicable for all distances r > 0 for an ideal point-body, and would apply only outside the body for a body of non-zero radius.
The permittivity function for a body with distributed mass/energy, such as an electric charge, may be similarly developed (see
∇ ¯ ⋅ E ¯ g = − 4 π G m τ 0 = ∇ ¯ ⋅ ( − c 2 ∇ ¯ ε _ r ) , ∇ ¯ ⋅ ∇ ¯ ε _ r = 4 π G m τ 0 c 2 = 4 π G W τ 0 c 4 . (3)
In the unified electro-gravity (UEG) model, the permittivity distribution of the free-space is dependent upon the energy density distribution, which is dependent upon the source charge. This is unlike a linear dielectric medium where the permittivity function is independent of the field strength or the source charge. Having the permittivity distribution to be a function of the source charge, is
equivalent to having the electric field distribution to be a non-linear function of the source charge. The energy density in such a non-linear medium needs to be properly modeled, starting from the fundamentals. This would result in a general expression for the energy density for a non-linear medium, which may be verified with a standard expression of the energy density for a linear medium, as a special case when the permittivity is a constant independent of the charge.
The electric field E ¯ and the electric flux density D ¯ produced due to a charge q, at a distance r from the center of the charge, in the presence of a permittivity distribution ε ( r ) = 1 / ε _ ( r ) may be expressed using the Coulomb’s Law.
E ¯ = q 4 π r 2 ε ( r ) r ^ , D ¯ = q 4 π r 2 r ^ , E ¯ = D ¯ ε ( r ) = ε _ ( r ) D ¯ . (4)
Let us calculate an incremental energy dW required in moving an incremental charge dq from infinity to a radius r = r q , using the above electric field. This is equivalent to having d W = V ( q ) d q using a potential concept, where V ( q ) is the potential (function of q) at the radius r = r q . Integrating the dW over the total charge q would give the total energy W.
d W = d q ∫ r q ∞ E ¯ ( q ) ⋅ d r ¯ = V ( q ; r = r q ) d q = ∭ τ ; r > r q d W τ d τ , W = ∫ q = 0 q d W = ∭ τ ; r > r q ( ∫ q = 0 q d W τ ) d τ . (5)
The incremental charge dq may be expressed in terms of an incremental change in the electric flux density d D ¯ using Gauss Law. The incremental energy dW can then be expressed as an integral over the external volume τ ; r > r q using the divergence theorem.
d W = V ( q ; r = r q ) d q = ∬ S , r = r q + δ V ( q ) d D ¯ ⋅ d s ¯ = ∭ τ ; r > r q ∇ ¯ ⋅ ( − V ( q ) d D ¯ ) d τ = ∭ τ ; r > r q ( − ∇ ¯ V ( q ) ⋅ d D ¯ ) d τ + ∭ τ ; r > r q − V ( q ) ( ∇ ¯ ⋅ d D ¯ ) d τ = ∭ τ ; r > r q E ¯ ( q ) ⋅ d D ¯ d τ
= ∭ τ ; r > r q ε _ ( q ) D ¯ ( q ) ⋅ d D ¯ d τ = ∭ τ ; r > r q ε _ ( q ) 1 2 ∂ ∂ q ( D ¯ ( q ) ⋅ D ¯ ( q ) ) d q d τ = ∭ τ ; r > r q 1 2 ε _ ( q ) ∂ | D ¯ | 2 ∂ q d q d τ = ∭ τ ; r > r q d W τ d τ ; ∇ ¯ ⋅ d D ¯ = 0 in τ . (6)
We have now established an expression for an incremental energy density d W τ , which may be integrated over the total charge q to obtain the required expression of the energy density W τ . The general expression may be verified to be the conventional energy density for a linear medium, when the permittivity is a constant independent of the charge q. The total energy W can then be calculated as the volume integral of the energy density W τ .
d W τ = 1 2 ε _ ( q ) ∂ | D ¯ | 2 ∂ q d q , W = ∭ τ W τ d τ = ∭ τ ( ∫ q = 0 q d W τ ) d τ = m 0 c 2 . (7)
In equivalency to a conventional definition of the energy density for a linear medium, it may be useful to define a new variable ε _ ′ for a non-linear medium. The conventional expression of the energy density for a linear medium, with the inverse-permittivity ε _ for the linear medium simply substituted by the new equivalent variable ε _ ′ , would be valid as well for the non-linear medium.
W τ = ∫ q = 0 q d W τ = ∫ q = 0 q 1 2 ε _ ( q ) ∂ | D ¯ | 2 ∂ q d q = 1 2 ε _ ′ | D ¯ | 2 = 1 2 ε _ 0 ε _ ′ r | D ¯ | 2 , ε _ ′ = 1 | D ¯ | 2 ∫ q = 0 q ε _ ( q ) ∂ | D ¯ | 2 ∂ q d q = 1 q 2 ∫ q = 0 q ε _ ( q ) ∂ q 2 ∂ q d q = 2 q 2 ∫ q = 0 q ε _ ( q ) q d q = 2 ε _ 0 q 2 ∫ q = 0 q ε _ r ( q ) q d q = ε _ 0 ε _ ′ r . (8)
For a given total energy W, the energy density W τ we derived may not be unique. An alternate expression of the energy density W ′ τ may be defined by adding a distribution f to the original energy density W τ , such that W ′ τ would result in the same total energy W when integrated over the total volume τ as that due to the original energy density W τ . Accordingly, a fixed total energy W is redistributed into the different energy densities W τ and W ′ τ inside the volume τ . This can be accomplished by having the additional distribution f expressed as divergence of a suitable vector distribution U ¯ , which is identically zero everywhere outside the volume τ .
W = ∭ τ W τ d τ = m 0 c 2 , W τ = Δ W Δ τ = 1 2 ε _ ′ | D ¯ | 2 = 1 16 π 2 r 4 ε 0 ∫ 0 q q ε _ r ( q ) d q , W ′ τ = W τ + f , f = ∇ ¯ ⋅ U ¯ = ∇ ¯ ⋅ ( U u ^ ) ; U ¯ = 0 outside of τ , (9)
W = ∭ τ W ′ τ d τ = ∭ τ ( W τ + f ) d τ = ∭ τ ( W τ + ∇ ¯ ⋅ U ¯ ) d τ = ∭ τ W τ d τ + ∭ τ ∇ ¯ ⋅ U ¯ d τ = ∭ τ W τ d τ + ∬ S U ¯ ⋅ d s ¯ = ∭ τ W τ d τ , (10)
U ( W τ ) : U ( W τ = 0 ) = 0 , u ^ = r ^ ; W τ = 0 outside of τ , U ¯ = ζ W τ r ^ . (11)
An alternate expression of the energy density W ′ τ , as in (9), would require revision of the Poynting theorem of the electromagnetic theory [
Theoretically, there are many possible expressions for the vector function U ¯ . A simple, physically meaningful proposition is to express the function U ¯ (11), referred to as the UEG function, proportional to the original energy density W τ , and directed toward the center of mass/gravity of the particle.
Consider the external free-space region of a “neutral” material body that appears to be charge-less to an external observer, with the electromagnetic field and its associated energy density in the external region equal to zero. With the above choice of the UEG function U ¯ (11), no new, special treatment would be required to model the gravitational field in the external region, because the original as well as the revised energy densities of (9), W τ and W ′ τ respectively, would be zero in this region. Further, with the choice of the UEG function (11), the total energy W, or its equivalent mass m = W / c 2 of the neutral body, as seen by an external observer, would remain the same whether the W is calculated by integrating the original or the revised energy density in the internal region, as per the deduction in (10). Accordingly, Newtonian gravitational field in the external region of such neutral material bodies would remain unaffected by the new UEG theory, which would be consistent with observation.
The selected UEG function U ¯ (11) could be non-zero in the internal region of a neutral body discussed above, due to non-zero electromagnetic fields associated with any charged sub-structure internal to the body. This would lead to having the revised energy density W ′ τ in (9) to be different from the original energy density W τ in the internal region. Accordingly, it would require a revised treatment for modeling the gravitational field, in the internal charged region of such a neutral material body, or for that matter in any general region in the presence of a non-zero electromagnetic field.
The new alternate expression for the energy density W ′ τ of (9), using the new UEG function U ¯ of (11), may now be substituted for the original energy density W τ 0 = W τ in the UEG modeling of the gravitational field in (3).
∇ ¯ ⋅ E ¯ g = − c 2 ∇ ¯ ⋅ ∇ ¯ ε _ r = − 4 π G m ′ τ = − 4 π G W ′ τ c 2 = − 4 π G c 2 ( W τ + ∇ ¯ ⋅ U ¯ ) = − 4 π G c 2 W τ − ∇ ¯ ⋅ ( γ W τ r ^ ) , 4 π G c 2 U ¯ = 4 π G c 2 ζ W τ r ^ = γ W τ r ^ . (12)
It may be observed from the above expression of the gravitational field E ¯ g , that the new UEG function U ¯ , which was introduced for an alternate definition of the energy density W ′ τ in (11), would be equivalent to having an additional gravitational field equal to − γ U ¯ , referred to as the UEG field. The parameter γ in (12) is a new scalar constant, referred to as the UEG constant, which is related to the constant ζ used in (11).
We will solve for the inverse-relative permittivity function ε _ r ( r ) , by expanding it as power-series of r − i with unknown coefficients b i , and then solve for the coefficients in order to satisfy the above UEG relation (12). In the limit of large distance r, the ε _ r ( r ) needs to satisfy the Newtonian gravitational field (2) due to the particle mass m 0 , approaching unity at infinite distance r → ∞ . The limiting conditions would fix the first two coefficients b 0 and b 1 .
ε _ r ( r , q ) = ∑ i = 0 ∞ b i r − i , b 0 = 1 , b 1 = − G m 0 c 2 . (13)
This assumes that the surrounding medium at infinite distance from the particle is a free-space with ε = ε 0 , ε r = 1 = 1 / ε r = ε _ r , and the m = m 0 is the mass of the particle when measured in the free-space medium. If the surrounding medium is different from the free-space, with ε = ε r ε 0 , 1 / ε r = ε _ r ≠ 1 , then the above solution (13) needs to be scaled with b 0 = ε _ r and b 1 = G m 0 ε _ r c 2 . It may be shown from the following iterative solution for the ε _ r ( r ) , that each term in the series expression of (13), and therefore the entire expression of (13), would be multiplied by the ε _ r ( r → ∞ ) of the surrounding medium, in order to obtain the ε _ r ( r ) for the particle in the given surrounding medium. Further, the mass function m = m ( r = r q ) for the particle measured in the given surrounding medium, as derived in Section 4.2 using the above scaled ε _ r ( r ) , may be shown to be equal to m = m 0 ε _ r ( r → ∞ ) , as expected in Section 2. For simplicity, in the following derivations we will assume the surrounding medium to be free-space, the results from which may be properly scaled as needed for any other surrounding medium.
We may assume that the new UEG field − γ W τ r ^ is much stronger than the conventional Newtonian gravitational field of the charge particle, contributed due to the original energy density W τ . This is because the conventional Newtonian gravitational field of an elementary charge is known to be very week, having a negligible (essentially no) effect on the permittivity function. It may be shown, that this assumption would be valid given the radius r of the charge particle is much larger than the radius r 0 of a black-hole produced by an elementary charge q, with a mass equal to the classical mass q 2 / ( 8 π ε 0 r 0 c 2 ) of the charge with the radius r 0 .
∇ ¯ ⋅ E ¯ g = − c 2 ∇ ¯ ⋅ ∇ ¯ ε _ r ≃ − ∇ ¯ ⋅ ( γ W τ r ^ ) = − ∇ ¯ ⋅ ( γ r ^ 16 π 2 r 4 ε 0 ∫ 0 q q ε _ r ( q , r ) d q ) = − ∇ ¯ ⋅ ( γ q 2 ε _ ′ r ( r ) r ^ 32 π 2 r 4 ε 0 ) , r ≫ r 0 = G q 2 8 π ε 0 c 4 ,
E ¯ g ≃ − γ W τ r ^ = − γ r ^ 16 π 2 r 4 ε 0 ∫ 0 q q ε _ r ( q , r ) d q = − γ q 2 ε _ ′ r ( r ) r ^ 32 π 2 r 4 ε 0 , r ≫ r 0 = G q 2 8 π ε 0 c 4 . (14)
The expression (8) for the energy density W τ in a non-linear medium is used in the above derivation. Assuming that the charge distribution and the UEG solution are spherically symmetric, the differential operators in the above expression can be expressed in terms of derivatives with respect to the radius. Substituting the series expression of (13) in (14) we get,
∂ ∂ r ε _ r ≃ 1 c 2 ( γ W τ ) = γ 16 π 2 r 4 c 2 ε 0 ∫ 0 q q ε _ r ( r , q ) d q = 3 r μ 3 2 q 2 r 4 ∫ 0 q q ε _ r ( r , q ) d q , r μ 3 = γ q 2 24 π 2 c 2 ε 0 ∝ q 2 , r μ = ( γ q 2 24 π 2 c 2 ε 0 ) 1 / 3 = 5.14 × 10 − 16 γ 1 / 3 , ∂ 2 ε _ r ( r , q ) ∂ ( r − 3 ) ∂ ( q 2 ) ≃ − r μ 3 4 q 2 ε _ r ( r , q ) . (15)
∑ i = 0 ∞ b i ( − i ) r − ( i + 1 ) ≃ 3 r μ 3 2 q 2 ∑ i = 0 ∞ ( ∫ 0 q q b i ( q ) d q ) r − ( i + 4 ) = 3 r μ 3 2 q 2 ∑ i = 3 ∞ ( ∫ 0 q q b i − 3 ( q ) d q ) r − ( i + 1 ) . (16)
The above relation provides an iterative solution for the coefficients b i .
b i ≃ − 3 r μ 3 2 q 2 ( i ) ( ∫ 0 q q b i − 3 ( q ) d q ) , b 0 = 1 , b i = 0 ; i ≠ 3 k = 0 , 3 , 6 , 9 , ⋯ . (17)
The series may be re-sequenced with a k = b 3 k , because all coefficients b i for i other than i = 3 k = 0 , 3 , 6 , 9 , ⋯ are zero.
a k = b 3 k ≃ − r μ 3 q 2 ( 2 k ) ( ∫ 0 q q b 3 k − 3 ( q ) d q ) = − r μ 3 q 2 ( 2 k ) ( ∫ 0 q q a k − 1 ( q ) d q ) . (18)
From the above iterative relation it may be recognized that a k would be proportional to q 2 k . This condition may be used to simplify the iterative relation for a k and then solve for all the coefficients a k starting with the known coefficient a 0 = 1 .
a k ( q ) ∝ q 2 k , a 0 = 1 , a 1 = − r μ 3 2 × 2 , a 2 = r μ 6 2 × 2 × 4 × 4 ; a k = − a k − 1 r μ 3 ( 2 k ) ( 2 k ) . (19)
The series expression for the inverse-relative-permittivity function ε _ r ( r ) may be re-formatted as a power series of t 2 k , where t is a normalized variable t = ( r μ / r ) 1.5 , with corresponding normalized coefficients a ′ k .
ε _ r ( r ) = ∑ i = 0 ∞ b i r − i ≃ ∑ k = 0 ∞ a k r − 3 k = ∑ k = 0 ∞ a ′ k ( r μ r ) 3 k = ∑ k = 0 ∞ a ′ k t 2 k , a ′ k r μ 3 k = a k , t = ( r μ r ) 1.5 , a ′ k = − a ′ k − 1 1 ( 2 k ) ( 2 k ) , (20)
a ′ k = ( − 1 ) k 2 2 k ( k ! ) 2 , k ! = ( k ) ( k − 1 ) ( k − 2 ) ⋯ ( 1 ) , (21)
ε _ r ( r ) ≃ 1 − t 2 2 2 [ 1 ! ] 2 + t 4 2 4 [ 2 ! ] 2 − t 6 2 6 [ 3 ! ] 2 + ⋯ = J 0 ( t ) . (22)
The above series is recognized as the zeroth-order Bessel function J 0 ( t ) [
ε _ ′ r ( r ) = 2 q 2 ∫ 0 q q ε _ r ( q , r ) d q ≃ 1 − t 2 2 2 [ 1 ! ] 2 × 2 + t 4 2 4 [ 2 ! ] 2 × 3 − t 6 2 6 [ 3 ! ] 2 × 4 + ⋯ = ( 2 / t ) J 1 ( t ) . (23)
The inverse-relative permittivity function ε _ r = 1 / ε r of (22), as well as the corresponding effective function ε _ ′ r = 1 / ε ′ r of (23) are plotted in
The function ε _ r = 1 / ε r that would have resulted if a conventional energy density for a linear medium (see (14, 8)) were used (incorrectly) in the above derivation of Section 4.1, where the effective function ε _ ′ r = 1 / ε ′ r from (8) that defines the energy density would be equal to the function ε _ r = 1 / ε r , is expressed in (24), and is also plotted in
ε _ r ( r ) = ε _ ′ r ( r ) ≃ 1 − t 2 2 2 1 ! + t 4 2 4 2 ! − t 6 2 6 3 ! + ⋯ = e − t 2 / 2 . (24)
Notice in
energy/mass of the particle would be locally minimum.
From
Further, the relativity permittivity ε r from (22) in
Once the inverse-relative permittivity function ε _ r ( r ) is solved, the energy density can be expressed in terms of the ε _ r ( r ) using (8), which can then be integrated over the total volume outside the charge radius (there is no field inside the charge radius) to obtain the total energy or the equivalent mass m (=m0 in (13)) of the particle.
W = ∭ τ W τ d τ = m 0 c 2 = ∭ τ [ 1 16 π 2 r 4 ε 0 ∫ 0 q q ε _ r ( q , r ) d q ] d τ , m = m 0 = W c 2 = 1 4 π c 2 ε 0 ∫ r ∞ 1 r 2 ∫ 0 q q ε _ r ( q , r ) d q d r = m μ ∑ k = 0 ∞ ( − 1 ) k t ( 2 k + 2 3 ) 2 2 k ( k ! ) 2 ( k + 1 ) ( 3 k + 1 ) , t = ( r μ r ) 1.5 , m μ = q 2 8 π c 2 ε 0 r μ = 2.49 × 10 − 30 γ − 1 / 3 , r μ = ( γ q 2 24 π 2 c 2 ε 0 ) 1 / 3 = 5.14 × 10 − 16 γ 1 / 3 . (25)
The charge radius in (25) is maintained as a general variable (=r). The general mass function m ( r ) in (25) would also represent the equivalent energy ( = c 2 m ( r ) ) contained in the field external to a sphere of radius r, produced due to the charge placed at any radius less than r.
with respect to m μ is also plotted in (
m = m 0 = W c 2 = q 2 8 π c 2 ε 0 ∫ r ∞ ε _ r ( r ) r 2 d r = m μ ∑ k = 0 ∞ ( − 1 ) k t ( 2 k + 2 3 ) 2 2 k k ! ( 3 k + 1 ) . (26)
The smallest possible stable mass deduced from the oscillatory mass of (25) (
M p = q 2 m ′ e = g q 2 m e , g ≃ 2 , m ′ e = m e g ≃ m e 2 . (27)
The same conclusion may also be suggested by observing that the orbital magnetic moment of an atomic electron with an orbital angular momentum ℏ is approximately equal to the magnetic moment of a spinning electron with spin angular momentum ℏ / 2 . The approximately same magnetic moments in the two cases mean the velocity-radius product of the orbital and the spinning electrons are about the same. With about the same speed-radius product, having the spin angular moment ( = ℏ / 2 ) half of the orbital angular moment ( = ℏ ) suggests that the bare UEG static mass m ′ e of the spinning electron is about half of the total mass m e = 9.109 × 10 − 31 kg of the orbiting electron.
m ′ e × ( v r ) spin = ℏ 2 , m e × ( v r ) orbital = ℏ , ( v r ) spin = g 2 × ( v r ) orbital ≃ ( v r ) orbital , m ′ e = m e g ≃ m e 2 . (28)
With the assumption of m ′ e = m e / 2 for the minimum stable mass in
m ′ e m μ = m e 2 m μ = 1.5425 , m μ = m e 3.085 = 2.49 × 10 − 30 γ − 1 / 3 , γ 1 / 3 = 3.085 × 2.49 × 10 − 30 / m e , γ = 5.997 × 10 2 ( m / s 2 ) / ( J / m 3 ) . (29)
As per the UEG theory of the electron, the constant γ is declared to be a new natural constant, which is equal to a new gravitational acceleration in m/s2 toward the center of gravity, produced due to one J/m3 of energy density.
The above estimate of the value of the UEG constant requires the actual UEG static mass m ′ e of the electron. However, a general relationship between the smallest stable UEG static mass m ′ e of an elementary particle, the corresponding classical radius r ′ e , and the UEG constant γ required to produce the mass m ′ e , can be derived based on the expressions for the reference mass m μ (25) and reference radius r μ (15) used in the above analysis.
( m μ m ′ e ) 3 = 3 q 4 64 π c 4 ε 0 2 γ m ′ e 3 = 3 r ′ e 2 π γ m ′ e , γ m ′ e r ′ e 2 = 3 π ( m ′ e m μ ) 3 , m ′ e = q 2 8 π ε 0 r ′ e c 2 . (30)
The value of the ratio m / m μ = 1.5425 from the (
γ m ′ e r ′ e 2 = 3 π ( m ′ e m μ ) 3 = 34.590. (31)
If we simply assume the total mass m e of the elementary particle with spin to be twice the UEG mass m ′ e , and the classical radius r e associated with m e half of that ( = r ′ e ) with m ′ e , the γ , m e and r e may be related using a new dimensionless constant, which would be eight times the above constant.
γ m e r e 2 = 24 π ( m ′ e m μ ) 3 = 8 × 34.590 = 276.720. (32)
Notice that the above constant is close to twice the inverse-fine structure constant 1 / α = 137.036 , and the earlier constant in (31) is one fourth of the 1 / α , with less than one percent of difference. It may be possible that the normalized stable mass in (
Leaving aside any small computational inaccuracy, or any small difference due to lack of generality or rigor of the basic UEG model, the close relations of the above dimensionless constant (31) or (32) to the fine-structure constant is intriguing. First, the very existence of a dimensionless constant based on the UEG theory, and its intriguing close numerological relationship with the known fine-structure constant α , may strongly suggest certain fundamental basis and significance of the new UEG theory. The close numerological relationship may also strongly suggest an explicit close relationship between the UEG constant γ associated with the dimensionless constant (31 or 32) from the UEG theory, and the particle’s quantum-theoretical spin angular momentum ℏ / 2 (consequently, the Planck’s constant ℏ ) associated with the fine-structure constant α . However, any modeling of a physically spinning particle is beyond the scope of the present UEG theory, which is valid only for a static charge. A more advanced modeling, extending the static UEG theory to model an electrodynamic problem of a physically spinning charge, would be needed in order to study any direct physical relationship between the UEG theory and the quantum spin theory (and quantum theory in general), and consequently between the associated dimensionless constant (31 or 32) and the fine-structure constant α , respectively.
Consider two conducting plates placed in parallel with each other with a distance d, as shown in
By applying Gauss’s Law of electricity to the above problem, having the equal number of the positive and the negative charges, the external electric field E can be shown to be zero when integrated and averaged over a large surface, at any given time, or equivalently over a large time period at any given location. Accordingly,
positive and negative fields of a given magnitude would be equally likely, canceling with each other to result in the zero average field. However, the energy density associated with a field, which is proportional to the square of the field, would be positive both for the positive as well as the negative fields. Therefore, it would result in a non-zero value for the average of the energy density, 〈 E 2 〉 , associated with the above zero average field. The zero average field and the non-zero average energy density 〈 ω e 〉 , produced by a conducting plate at a normal distance d, maybe modeled equivalent to that produced by a time-varying point charge Q at the same radial distance, with the charge’s average value fixed to be zero but its non-zero mean-square value 〈 Q 2 〉 is equal to q 2 / 2 , where q is the elementary electronic charge.
〈 ω e 〉 s = ± 1 / 2 = ε 0 2 〈 E 2 〉 s = ± 1 / 2 = ε 0 2 〈 Q 2 〉 s = ± 1 / 2 ( 4 π ε 0 d 2 ) 2 = q 2 64 π 2 ε 0 d 4 , 〈 Q 2 〉 s = ± 1 / 2 = q 2 2 . (33)
The field model discussed above is valid for each spin state of the electron s = ± 1 / 2 , that are statistically independent of each other, resulting in the average of the total energy density to be twice that of the individual energy density of each state. On the other hand, the opposing external magnetic fields, produced due to the opposing spin states s = + 1 / 2 and s = − 1 / 2 of the electron, statistically cancel with each other, resulting in zero total external magnetic field, and zero associated energy density. Therefore, the average of the total energy density in the external region, including both the electric and magnetic fields, is equal to the average ( = 〈 ω e 〉 ) of the energy density due to only the electric field.
Now, the UEG effect due to this energy density would be responsible for an attractive gravitational field, having an acceleration E g u proportional to the average energy density 〈 ω e 〉 , with γ as the constant proportionality. The same UEG model was also used for modeling of a stable electron structure, as presented earlier in the paper. This UEG effect would be much stronger than the conventional (Newtonian) gravitational field due to the mass of the conducting plate, resulting in the total gravitational acceleration E g essentially equal to the E g u .
〈 ω e 〉 = 〈 ω e 〉 s = + 1 / 2 + 〈 ω e 〉 s = − 1 / 2 = 2 〈 ω e 〉 s = ± 1 / 2 = q 2 32 π 2 ε 0 d 4 , E g = E g u = γ 〈 ω e 〉 = γ q 2 32 π 2 ε 0 d 4 . (34)
The above UEG acceleration E g = E g u would produce an average force 〈 F 0 〉 on each unit cell of the other conducting plate (target plate), placed parallel to the first plate which is the source of the UEG field. The 〈 F 0 〉 s = ± 1 / 2 , experienced by each spin state s = ± 1 / 2 of an electron that occupies an unit cell in the target plate, can be calculated by multiplying the mass m e of an electron that occupies each unit cell to the UEG acceleration E g calculated above. The total force 〈 F 0 〉 per unit cell would be twice the force experienced by each spin state. Note that only the free electrons on the surface of the target conductor experience the UEG force. The rest of the material body of the target plate, that are contained enclosed by its outer surface, do not experience the UEG effect, because the total electromagnetic field inside this region is assumed to be ideally zero. Now, the total UEG force F u on a given area A of the conducting plate can be calculated by multiplying 〈 F 0 〉 by the factor A / A 0 , where A 0 = r ′ e 2 = 4 r e 2 is the area of the unit cell. The r e = r ′ e / 2 is the classical radius of a spinning electron, which is half of the classical radius r ′ e of a static electron without spin, because the spinning electron is assumed to carry twice the mass of a static electron.
〈 F 0 〉 s = ± 1 / 2 = E g m e = γ q 2 m e 32 π 2 ε 0 d 4 , 〈 F 0 〉 = 〈 F 0 〉 s = + 1 / 2 + 〈 F 0 〉 s = − 1 / 2 = 2 〈 F 0 〉 s = ± 1 / 2 = γ q 2 m e 16 π 2 ε 0 d 4 , F u = 〈 F 0 〉 A A 0 = γ q 2 m e A 64 π 2 ε 0 d 4 r e 2 , A 0 = r ′ e 2 = 4 r e 2 , r ′ e = 2 r e . (35)
The UEG force F u as calculated above maybe recognized to be the Casimir force F u = F c [
F u = γ q 2 m e A 64 π 2 ε 0 d 4 r e 2 = F c = ℏ c π 2 A 240 d 4 , γ m e r e 2 = ( π 3 15 ) ( 4 ℏ c π ε 0 q 2 ) = 2.067 α ≃ 2 α , α = q 2 4 ℏ c π ε 0 . (36)
It is seen that the UEG constant γ m e / r e 2 , as estimated through the Casimir effect, is very close to the factor 2 / α as estimated in (32) from the UEG model of an elementary particle (electron), with less than 3.5% difference. This close relationship strengthens the validity of the proposed UEG theory, as well as the fundamental relationship of the UEG theory to the Casimir effect, and therefore to the quantum field theory in general, on which the Casimir effect is founded upon as currently understood. This is a significant development.
A new unified electro-gravity (UEG) theory is presented to self-consistently model a stable structure of an elementary charge particle. This is based on a non-linear permittivity function of the empty space around the charge, which is dependent on the distribution of the energy density. A new fundamental physical constant γ , referred to as the UEG constant, is introduced in order to redefine the energy density around the charge, leading to a new gravitational field which is proportional to the energy density with the γ the constant of the proportionality. The value of the constant γ is estimated to be about 600 (m/s2)/(J/m3), by recognizing that the lightest possible elementary charge particle is an electron (or a positron). A fundamental dimensionless constant exists, relating the mass of an elementary charge particle, its classical radius, and the UEG constant γ required to produce the particle as the lightest possible stable particle based on the UEG theory. This dimensionless constant is shown to be closely related to the fine-structure constant α used in quantum electrodynamics [
The above possibility of the physical origin of the fine structure constant is further strengthened by applying the same UEG theory to correctly model the functional trend of the Casimir force between two parallel conducting plates. Equating the expression of the force between the two plates as derived from the UEG model, to that of the Casimir force as derived from a quantum-mechanical model based on zero-point vacuum energy, deduces approximately the same relationship between the UEG constant γ , the mass of an electron m e , electron’s classical radius r e , and the fine structure constant α , as that deduced from the UEG model of an elementary particle, within just 3.5% difference. This is a significant validation of the UEG theory, and its relations to the fine structure constant and the Casimir effect.
The energy density associated with the electric field around a charge, which is revised in this paper in terms of a new UEG function, is still not a uniquely-defined concept. The theory may be further refined and extended using higher-order UEG functions, which may explain the small differences in the different relationships between the UEG and the fine structure constants, as deduced in this paper from the particle modeling as well as the Casimir effect.
The author declares no conflicts of interest regarding the publication of this paper.
Das, N.K. (2021) A New Unified Electro-Gravity Theory for the Electron, and the Fundamental Origin of the Fine Structure Constant and the Casimir Effect. Journal of High Energy Physics, Gravitation and Cosmology, 7, 66-87. https://doi.org/10.4236/jhepgc.2021.71003