^{1}

^{*}

^{1}

^{*}

A technology called solar energy is a very promising technique, and is considered as the cleanest and the most abundant renewable resource that is naturally available every day. In this paper, a MATLAB environment has been developed to calculate real-time power incidence on a PV system. It takes into account the time, location, PV tilt, and azimuth angles, and weather conditions to estimate incident power. In this paper, one case study is considered at New York State location. It has been applied to a newly installed 8 kW residential system located in Inwood. The solar panels are made up of silicon HIT (Heterojunction with Intrinsic Thin Layer) cells by Panasonic and solar cell rated at 19%. The result shows that the system is performing at its rated efficiency. The calculations involve the determination of direct, diffused and reflected radiation on the panels taking into account the time of the day, location, PV area, and orientations and weather conditions. The cloudiness index may be estimated based on the weather data and included in the calculations. After performing the irradiance calculations, the output power is estimated based on the rated efficiency at its temperature and compared with the generated output power. The real-time assessment of a PV system performance, during the operational time monitors the health of the PV system. The data obtained by this calculator may accompany production data provided to the consumer by the utility company.

These days’ traditional resources, such as fossil fuels and natural gas, are known to be restricted resources in the main time and may produce air pollution emissions which is of great concern to the environment and problems such as global warming. Conversely, utilizing clean energy sources, such as solar energy has become a major player in the solution for the energy crisis in the near future.

Consequently, this clean energy technology has widely spread in the field of power systems and production. It has been significantly modified and improved throughout diverse stages of progress [

Therefore, solar energy systems are gaining popularity among these clean energy sources which are highly recommended for the environment. To raise its popularity, it is critical to improving the efficiency of solar energy capabilities to convert light-to-electricity energy. Based on that, the efficiency of the solar system has significantly been improved utilizing new technologies [

Accordingly, the main function of all these PV systems is to convert solar radiation into electricity [

Moreover, observing the performance of photovoltaic systems have become a fundamental mission to have a robust and reliable system. The observation of the performance can offer beneficial information about the photovoltaic’s operation and can designate what is required to be done to ameliorate the performance of the system if the dataset is conveyed correctly, in the opposite, the endeavors are wasted. This observation can also give a piece of good information on relevance of the operation to a third party in terms of notifying them about their PV arrays in case of unexpected events. For instance, if the real power generated from a solar PV array falls far below the designed level, which at times, can lead to a complete loss in the efficiency. Moreover, if shading happens it can cause a long term performance loss, hence the shortfall in the expected level of annual power production [

In this paper, an assessment of the performance of the PV system is used in terms of involving a third party to be aware of the performance of the PV system that is installed on their property. The system output can be sensed every minute, or every hour and the results stored. Even with hourly or minutely sensed output, a huge amount of dataset is generated. To be useful, the raw dataset must be checked for integrity and then summarized. Data needs to be collected for at least twelve months to reflect seasonal variations, even though monthly averages are a convenient interval for summarizing energy production, consumption, losses and efficiency [

There are three main factors to locate the sun’s position in the sky [

Declination is the angle that locates between the sun’s direction and the orbit plane of the earth around the sun. It changes generally as a result of the rotation of earth around an axis. The maximum value is 23.45˚ at midsummer in the northern hemisphere and the minimum value is 23.45˚ at northern midwinter [

δ = ε sin { ( n + 284 ) × 360 365 } , (1)

where, ε = 23.45 ∘ is constant value, and n represents the day of the year.

The solar altitude angle, α , is the solar angle that is located between the horizontal and the solar beam, that is, the complement of the zenith angle. It can be given as follow

α = sin − 1 { sin ( L ) sin ( δ ) + cos ( L ) cos ( δ ) cos ( ω ) } , (2)

where, the hour angle is ω = 15 ( localTime − 12 ) . Therefore, during morning time the solar altitude angle rises until achieving the peak at noon which matches the sun’s crucial elevation in the sky with regarding to an observation point on the earth [

The solar azimuth angle, Ψ , is the sun’s deviation of the projection from the north hemisphere is zero for a surface facing due south, 180˚ due north, 0˚ to 180˚ for a surface facing westwards and, 0˚ to 180˚ eastward [

{ Ψ = 180 − cos − 1 ( cos ( Ψ ) ) , if sin ( Ψ ) < 0 Ψ = 180 + cos − 1 ( cos ( Ψ ) ) , if sin ( Ψ ) > 0 (3)

sin Ψ = cos ( δ ) sin ( ω ) cos ( α ) (4)

The angle incidence, θ , is the angle between the beam radiation on the surface and a vector orthogonal to the surface of a solar panel on the ground, it can be expressed as

cos ( θ ) = sin ( β ) sin ( L ) cos ( β ) − sin ( δ ) cos ( L ) sin ( β ) cos ( γ ) + cos ( δ ) cos ( L ) cos ( β ) cos ( ω ) + cos ( δ ) sin ( L ) cos ( γ ) cos ( ω ) + cos ( δ ) sin ( β ) sin ( γ ) sin ( ω ) (5)

In this experimental study, the three-component model of the solar irradiance is considered to compute the total solar irradiance on an inclined surface that can be expressed as S G T , the superscripts T indicates tilted surfaces, arriving at an inclined PV-module

S G T = S B H × ( cos θ cos z + ρ ( 1 − cos β ) 2 ) + S D H × ( ( 1 + ρ ) + ( cos β − ρ cos β ) 2 ) (6)

where, S B H represents the direct beam irradiance measured at the horizontal surface that reaches the PV-module without being reflected or scattered, S D H represents the diffused solar irradiance on horizontal surfaces which is scattered by the clouds and the reflection coefficient ρ is the reflected solar irradiance by the ground, see

Therefore, as mentioned solar irradiance components can be defined as follows

• The direct beam irradiance on a horizontal surface can be defined by

S B H = I 0 × { 1 + 0.033 cos ( 2 π n − 4 365 ) } × e − 0.8662 T L ( m ) D R ( m ) cos ( z ) (7)

where, I 0 represents the solar constant, known as 1360 W/m^{2}, the Linke turbidity factor is represented by T L , the Rayleigh scattering optical depth is represented by D R ( m ) , and air mass is represented by m [

m = 1 cos z + 0.50572 × ( 96.07995 − z ) − 1.6364 (8)

Moreover, the Linke turbidity factor, T L is described as the number of Rayleigh atmospheres necessary to exemplify the actual optical thickness of D ( m ) as

T L = D ( m ) D R ( m ) , (9)

where the empirical equation for D R ( m ) is given by [

D R ( m ) = 1 6.6296 + 1.7513 m − 0.1202 m 2 + 0.0065 m 3 − 0.00013 m 4 (10)

• The diffused irradiance on a horizontal surface is defined by [

Therefore, a useful direction that can be used to define the extent of cloudiness of the sky is through some mathematical relationships among the available solar fluxes like global irradiance, diffuse irradiance and extraterrestrial irradiance. Two parameters inter-relating these fluxes are defined as the diffuse fraction of horizontal radiation, K D and the clearness index, K C . These two parameters thus can be expressed as

K D = S D H S G H (11)

K C = S G H Extraterrestrial horizontal irradiance (12)

thus, in this work [

K D ≈ { 0.98 , if K C ≤ 1 0.910 + 1.15 K C − 4.936 K C 2 + 2.848 K C 3 , if 0.1 ≤ K C ≤ 0.7 (13)

In this study, a solar radiation program is done using the MATLAB environment. The program designed to accept the values of the geographical location such as latitude L, longitude ϕ , at any given time of day and year and the panel tilt angle along with the azimuth angle as inputs. This program is designed to define the time of the sunset and sunrise for any solar panel. Thus, it can be also used to calculate daily irradiance on the solar panels. In this study, a Panasonic HIT solar cell is considered to evaluate the system performance during a specific day of operation at the location of Inwood, New York. The parameters used in irradiance calculations are given in

Type | Parameters |
---|---|

Latitude | 44.16 N |

Longitude | 77.16 W |

Day | 5^{th} |

Month | 3 |

Year | 2020 |

Module Tilt Angle, β | 27 |

M o d u l e s 1 Azimuth Angle, Ψ 1 | 61 E |

M o d u l e s 2 Azimuth Angle, Ψ 2 | 241 SE |

Solar Constant | 1360 Wm^{−2} |

Ground Reflectivity, ρ | 0.2 |

Linke Turbidity, T L | 1 |

Clearness Index, K C | 0.5 |

Number of M o d u l e s 1 | 16 |

Number of M o d u l e s 2 | 9 |

Module Area | 1.461 m^{2} |

In this study, the performance of a PV system depends mainly on solar irradiance and temperature. Evaluating the system efficiency is significantly important in daily operations to provide sufficient energy to cover the need for electricity. On the other hand, there are some other factors that can effect the system performance such as dust, dirt, and shadows. These factors can be accumulated on the PV system HIT module surface, blocking some of the sunlight and reducing output [

Although typical dirt and dust is cleaned off during every rainy season, it is more realistic to estimate system outputs by taking into account the reduction due to dust build-up in the dry season [

μ = P production A × I G H (14)

where, A represents the area surface on the panel, P production represents the electrical production and I G H is the incoming solar irradiation. The temporal evolution of this solar system electrical efficiency is described in

It can be seen that the electrical efficiency is decreasing up to noon due to the negative effect of the solar cells temperature during this period of the day and it is increasing for the rest of the day. It is also noticed that the PV panel electrical efficiency is higher for white soil due to its higher electrical production. As a result of the given plot, the blue graph represents the total power of both models from sunrise at around 6:15 a.m. up to sunset at around 7:15 p.m., while the red graph is the power production at the homeowner during the day. By using the Equation (14), the system efficiency can be obtained based on the given parameters. Thus, the system efficiency is described by the white dotted line and shows that the system efficiency is 19%. Therefore, the homeowners have daily access to track the system performance and they can report the system’s insulators about their concerns based on the data reading. Thus, this program has the ability to provide and evaluate the system performance during each slot of operation.

In this paper, an experimental study of specific PV panels has been designed using the MATLAB environment to perform a daily evaluation on the efficiency and performance of the model. It has been done by using equations that have been formulated by extensive study of previous researches and extending the model to the present problem that is identified. The measurement of the PV system performance ensures, as an assessment of the health of the system, verification of a performance model to then be applied to another system. A performance assessment is most valuable when it is completed, yet currently, no standard exists to guide this process. The results of this research are very promising, with a considerable enhancement of the efficiency relative to the PV model. This model provides some advantages in order to evaluate the performance of the PV system during the operational time and to assess the health of the PV system. Moreover, this program can be also developed in solar tracking system to set or determine a good position for the PV panels where it can absorb more sunlight to provide enough energy to support the loads. Thus, this technique will help reduce the dependency of traditional sources which could be depleted in the near future by enhancing the use of solar energy, especially the PV model.

The authors declare no conflicts of interest regarding the publication of this paper.

ALzahrani, A.M. and Zohdy, M.A. (2020) Real-Time Performance Assessment of Operating Photovoltaic (PV) Systems. Energy and Power Engineering, 12, 339-347. https://doi.org/10.4236/epe.2020.126020