^{1}

^{1}

^{2}

^{1}

^{1}

^{1}

^{1}

^{1}

^{1}

^{1}

From resolution of two-dimensional equation of heat in dynamic frequency regime, we have plotted evolution curves of temperature according to depth of material or in lateral direction. They will allow us to evaluate thermal behavior of towed material. Aim of study is to use fibers as a thermal insulating material by proposing a method for determining effective thermal insulation layer in dynamic frequency regime.

Controlling energy consumption in homes during hot weather, or in cold rooms requires, among other things, good thermal insulation. Problems of cost of synthetic materials and end-of-life management lead us to propose use of biodegradable materials. Thus study of thermal behavior of material for use in thermal insulation [

Several methods for calculating transient or established dynamic regimes [

We propose in this study resolution in dynamic regime established by imposing boundary conditions particular to panel of fibers.

Temperature curves along material depth or in lateral direction will allow us to evaluate thermal behavior of fibers material. Influence of the thermal exchange coefficient on front face will be highlighted.

Equation of heat transfer through rectangular material to absence of internal source, is written in two dimensions (

α ( ∂ 2 T ∂ x 2 + ∂ 2 T ∂ y 2 ) = ∂ T ∂ t (1)

α is thermal diffusivity coefficient of the material (m^{2}·s^{−1}) and is expressed as

α = λ ρ C (2)

where:

- ρ (kg·m^{−3})is density of material,

- C (J·kg^{−1}·K^{−1}) is mass thermal capacity,

- λ (W·m^{−1}·K^{−1}) is thermal conductivity of material.

For method by separating variables, we propose:

T ( x , y , t ) = X ( x ) ⋅ Y ( y ) ⋅ Z ( t ) (3)

(3) in (1) leads to following expressions:

α ( 1 X ( x ) ⋅ ∂ 2 X ( x ) ∂ x 2 + 1 Y ( y ) ⋅ ∂ 2 Y ( y ) ∂ y 2 ) = 1 Z ( t ) ⋅ ∂ Z ( t ) ∂ t (4)

{ 1 Z ( t ) ⋅ ∂ Z ( t ) ∂ t = i ⋅ ω ( 5 ) ∂ 2 X ( x ) ∂ x 2 + β 2 ⋅ X ( x ) = 0 ( 6 ) ∂ 2 Y ( y ) ∂ y 2 + μ 2 ⋅ Y ( y ) = 0 ( 7 )

Equations (5)-(7) are deduced from following relationships (8):

ω = i α ( β 2 + μ 2 ) with μ = i i ⋅ ω α + β 2 (8)

Solutions of preceding equations give:

Z ( t ) = a ⋅ e i ⋅ ω ⋅ t (9)

X ( x ) = a 1 cos β ⋅ x + b 1 sin β ⋅ x (10)

Y ( y ) = a 2 cos μ ⋅ y + b 2 sin μ ⋅ y (11)

which gives general expression of temperature through material in form:

T ( x , y , t ) = ( a 1 cos β ⋅ x + b 1 sin β ⋅ x ) ( a 2 cos μ ⋅ y + b 2 sin μ ⋅ y ) ( e i ⋅ ω ⋅ t ) (12)

We apply to system boundary conditions, Equations (13)-(16), reflecting heat exchanges between faces of material and external environment:

{ ∂ T ∂ x | x = 0 = H 1 ( T − T i ) ( 13 ) ∂ T ∂ x | x = H = 0 ( 14 ) ∂ T ∂ y | y = 0 = 0 ( 15 ) ∂ T ∂ y | y = L = − H 4 ⋅ T (16)

with:

T i = T 0 ⋅ e i ⋅ ω ⋅ t (17)

H 1 = h 1 λ and H 4 = h 4 λ (18)

T i is the temperature imposed on the front face.

We pose:

X 0 = T 0 = k ⋅ a 1 (19)

β ⋅ b 1 = H 1 ( a 1 − X 0 ) (20)

we obtain:

b 1 a 1 = H 1 β ( 1 − k ) (21)

tan β ⋅ H = H 1 β ( 1 − k ) (22)

tan μ ⋅ L = H 4 μ (23)

Graphical representations of

n | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 11 |
---|---|---|---|---|---|---|---|---|---|---|---|

μ n , β n (rad·m^{−1}) | 5 | 32 | 65 | 65 | 96 | 127 | 158 | 192 | 219 | 250 | 284 |

Solution of equation of heat can thus be written:

T ( x , y , t ) = ∑ m ∑ n A m n ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) ( cos μ n ⋅ y ) ⋅ e ω m n ⋅ t (24)

To explain the coefficient A m n , we pose:

F ( x , y ) = ∑ m ∑ n A m n ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) ( cos μ n ⋅ y ) (25)

It can be written as:

F ( x , y ) = ∑ m B m ⋅ ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) (26)

with:

B m = ∑ n = 1 ∞ A m n ( cos μ n ⋅ y ) (27)

B m = 1 ∫ 0 H ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) 2 d x ⋅ ∫ 0 H F ( x , y ) ⋅ ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) d x (28)

A m n = 1 ∫ 0 L ( cos μ n ⋅ y ) 2 d y ∫ 0 L B m ⋅ cos μ n ⋅ y d y (29)

We replace B m in (38) by its expression obtained by (37), we obtain:

A m n = 1 ∫ 0 H ∫ 0 L ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) 2 ( cos μ n ⋅ y ) 2 d x d y ⋅ ∫ 0 H ∫ 0 L F ( x , y ) ⋅ ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) ( cos μ n ⋅ y ) d x d y (30)

We apply normalization condition (31):

{ N ( β m ) = ∫ 0 H ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) 2 d x N ( μ n ) = ∫ 0 L ( cos μ n ⋅ y ) 2 d y (31)

N ( β m ) = 1 2 H ( β m + ( H 1 ( 1 − k ) 2 + H 1 ( 1 − k ) ) ) (32)

N ( μ n ) = 1 2 ( H 4 ( μ n 2 + H 4 2 ) + L ) (33)

We finally get:

A m n = 4 ( H ( β m + ( H 1 ( 1 − k ) 2 + H 1 ( 1 − k ) ) ) ) ( H 4 ( μ n 2 + H 4 2 ) + L ) ⋅ ∫ 0 H ∫ 0 L F ( x , y ) ⋅ ( β m cos β m ⋅ x + ( H 1 ( 1 − k ) ) sin β m ⋅ x ) ( cos μ n ⋅ y ) d x d y (34)

Coefficient k is relative to the thermal effisitivity, it defines transmission of heat to wall of material: 0 ≤ k ≤ 1 .

k = 0: we have perfect thermal insulation behavior on surface of material;

k = 1: we have perfect conductor behavior on surface of material.

We worked with k = 0.85.

Taking into account results obtained in previous studies [

Solution (25) of heat equation made it possible to draw simulation curves of Figures 4-7 showing evolution of temperature inside material.

excitation towards amplitude of initial temperature of material; material warms up slightly.

Methods of thermal characterization in numerical simulation [

Starting from resolution of equation of two-dimensional heat in frequency dynamic regime, we obtained curves which show thermal behavior of fibers material subjected to different climatic constraints. Thermal insulating nature of material is highlighted by an evanescent tendency of external excitation inside material.

The authors declare no conflicts of interest regarding the publication of this paper.

Brahim, M.S.O., Diagne, I., Ndiaye, M.B., Traore, Y., Faye, S., Thiam, C., Traore, P.T., Fame, A., Thiam, S.K.B. and Sissoko, G. (2020) Study at Two Dimensions of Thermal Transfer through a Fibers Panel Subjected to Climatic Constraints in Dynamic Frequency Regulations Established. Energy and Power Engineering, 12, 135-142. https://doi.org/10.4236/epe.2020.125010