R. Saravanathamizhan, N. Mohan, N. Balasubramanian, V. Ramamurthi , C. Ahmed Basha, “ Evaluation of Electro-Oxidation of Textile Effluent Using Response Surface Method”, Clean, Vol.35, pp. 355-361, July 2007

has been cited by the following article:

• TITLE: Optimization of Draft Tube Position in a Spouted Bed Reactor using Response Surface Methodology

  AUTHORS: Elaheh Baghban, Arjomand Mehrabani-Zeinabad

  KEYWORDS: Spouted Bed; Draft Tube; Minimum Spouting Velocity; Response Surface Methodology

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.2 No.4B, January 17, 2013

  ABSTRACT: Optimization of draft tube position in a spouted bed reactor used for treatment of wastewater containing low concentration of heavy metals is investigated in this paper. Response surface methodology is used to optimize the draft tube height, the draft tube width and the gap between the bottom of the draft tube and the inlet nozzle. It is observed that the draft tube with a height of 60 millimeter, width of 12 millimeter and the gap of 13 millimeter between its bottom and inlet nozzle, results in optimum value of minimum spouting velocity, measured 45 cubic centimeter per second (2.7 Liter per minute) .