M. C. Carotta, G. Martinelli, Y. Sadaoka, P. Nunziante and E. Traversa, “Gas-Sensitive Electrical Properties of Perovskite-Type SmFeO₃ Thick Films,” Sensors Actuators B: Chemical, Vol. 48, No. 1-3, 1998, pp. 270-276. doi:10.1016/S0925-4005(98)00011-2

has been cited by the following article:

• TITLE: Fabrication of Sm-Based Perovskite-Type Oxide Thin-Films and Gas Sensing Properties to Acetylene

  AUTHORS: Tomohisa Tasaki, Satoko Takase, Youichi Shimizu

  KEYWORDS: Perovskite-Type Oxide; Thin-Film; Ac Impedance; Acetylene; Gas Sensor

  JOURNAL NAME: Journal of Sensor Technology, Vol.2 No.2, June 13, 2012

  ABSTRACT: Sm-based perovskite-type oxide (SmMeO3: Me = Cr, Mn, Fe, Co) thin-films could be synthesized by a wet-chemical method using an acetylacetone—Poly(Vinyl Pyrrolidone) (PVP) polymeric precursor method at 750℃. The perovskite-type oxide thin-films were tried to apply an acetylene gas sensor based on AC impedance spectroscopy. Among the oxides tested, SmFeO3 thin-film sensor showed good sensor responses in which the AC impedance at 20 kHz was depending on acetylene gas concentration between 2 ppm and 80 ppm at 400℃.