TITLE:
Theoretical Analysis and Experimental Verification of Crack Initiation Characteristics of Compression-Shear Plane Crack with Hydraulic Pressure
AUTHORS:
Yajuan Xie, Song Yu, Bangxiang Li, Ziyao Xu, Weishen Zhu
KEYWORDS:
Compression-Shear Plane Crack, Stress Intensity Factor, Experimental Verification, Crack Initiation Characteristics
JOURNAL NAME:
World Journal of Mechanics,
Vol.8 No.9,
September
29,
2018
ABSTRACT: In this paper, the crack initiation characteristics of compression-shear plane crack with hydraulic pressure were studied by using theoretical analysis and experimental verification methods. The formula derivation process of stress intensity factor of crack tip and open-type crack initiation angle and initiation strength was expounded in detail. Cement mortar specimens prefabricated with open-type crack were made for biaxial compression test. The results show that the mode I stress intensity factor is inversely proportional to the dip angle of pre-exciting crack, water pressure and crack width. The fracture toughness is most easily achieved when the dip angle of pre-exciting crack is 60°. The mode II stress intensity factor is symmetrically distributed with the dip angle and independent of the water pressure and crack width. For open-type crack, the crack initiation angle decreases with the increase of the dip angle of pre-exciting crack, water pressure and crack width; the crack initiation strength is inversely proportional to the water pressure and proportional to the lateral pressure. The research results can provide ideas for the study of crack initiation under the coupling of ground stress and osmotic pressure in tunnel engineering.