S. J. Choo, G. McRae, J. P. Olomon, G. St George, W. Davis, C. L. Burleson-Bowles, D. Pang, H. H. Luo, D. Vavra, D. T. Cheung, J. H. Oury and C. M. Duran “Aortic Root Geometry: Pattern of Differences between Leaflets and Sinuses of Valsalva,” The Journal of Heart Valve Disease, Vol. 8, No. 4, 1999, pp. 407-415.

has been cited by the following article:

• TITLE: Evaluation of Stress Strain Patterns in a Stentless Aortic Valve and Its Leaflets

  AUTHORS: Gideon Praveen Kumar, Lazar Mathew

  KEYWORDS: Blood Flow, Aortic Valve Mechanics, Conceptual Design, Finite Element Analysis

  JOURNAL NAME: Surgical Science, Vol.2 No.1, January 29, 2011

  ABSTRACT: Objective: To design a new trileaflet aortic valve and investigate its mechanical behavior using finite ele- ment methods. Background: Quantification of aortic valve deformation during cardiac cycle is essential in understanding normal and pathological valvular function and eventually in the design of valves. We have designed and analyzed a new tissue valve model to investigate the mechanics of the valve and its components. Methods: Steps involves in 3D CAD based geometric modeling of a trileaflet aortic valve and the effects of different component dimensions on the mechanical behavior of valve is presented in this paper. Conceptual designing of individual components was used to build the total geometric model. Different physiological pressures were applied on the valve model and its deformation patterns were studied. Results: A new geometric model of a trileaflet aortic valve was designed. Its mechanical behavior was studied. Geometric analysis and simulation of these models enhanced the designer to optimize the geometry suitable for performance during and after implantation. Conclusion: The geometry-based model presented here allows determining quickly if the new set of valve component dimensions results in a functional valve. This is of great interest to designers of new prosthetic heart valve models, as well as to surgeons involved in valve- sparing surgery.