H. Hansson, C. Norstrom and S. Punnekkat, “Integrating Reliability and Timing Analysis of CAN-Based Systems,” Proceedings of 2000 IEEE International Workshop Factory Communication Systems (WFCS’2000), Porto, 2000, pp. 165-172.

has been cited by the following article:

• TITLE: Reliability Analysis of Controller Area Network Based Systems—A Review

  AUTHORS: Gerardine Immaculate Mary, Zachariah C. Alex, Lawrence Jenkins

  KEYWORDS: Reliability Analysis of Controller Area Network Based Systems; Fault-Tolerant CAN Based Systems

  JOURNAL NAME: International Journal of Communications, Network and System Sciences, Vol.6 No.4, April 17, 2013

  ABSTRACT: This paper reviews the research work done on the Reliability Analysis of Controller Area Network (CAN) based systems. During the last couple of decades, real-time researchers have extended schedulability analysis to a mature technique which for nontrivial systems can be used to determine whether a set of tasks executing on a single CPU or in a distributed system will meet their deadlines or not [1-3]. The main focus of the real-time research community is on hard real-time systems, and the essence of analyzing such systems is to investigate if deadlines are met in a worst case scenario. Whether this worst case actually will occur during execution, or if it is likely to occur, is not normally considered. Reliability modeling, on the other hand, involves study of fault models, characterization of distribution functions of faults and development of methods and tools for composing these distributions and models in estimating an overall reliability figure for the system [4]. This paper presents the research work done on reliability analysis developed with a focus on Controller-Area-Network-based automotive systems.