Alan Meier, Wolf-gang Huber and Karen Rosen, “Reducing Leaking Elec-tricity to 1 Watt”, The 1998 ACEEE Summer Study on Energy in Buildings, August 1998.

has been cited by the following article:

• TITLE: Advanced Burst Mode Control to Reduce the Standby Power of Flyback Converter

  AUTHORS: Min-Sung Kim, Hyoung-Woo Kim, Ji-Hye Jang, Ki-Hyun Kim

  KEYWORDS: Standby power, Flyback converter, PWM IC, SMPS

  JOURNAL NAME: Engineering, Vol.5 No.1B, January 16, 2013

  ABSTRACT: This paper we proposed advanced burst mode control technique to reduce the standby power consumption of the switch mode power supply (SMPS). To reduce the standby power consumption, most of the converter use burst mode or skip mode control technique. However Conventional standby mode control techniques have some problems such as audible noise and poor regulation. In proposed techniques, basically, the burst mode control technique is employed to reduce the fundamental switching frequency while limiting the peak drain current. But, in proposed technique, to improve the regulation characteristic, burst period of the proposed technique is shorter than that of the conventional burst mode technique. And also, to reduce the switching loss increase due to the short burst period, burst switching signal of the proposed technique is partially skipped. By using proposed advanced burst mode control technique, calculated standby power is 0.695W while standby power of the conventional burst mode control is 1.014W.