Scientific Research An Academic Publisher
OPEN ACCESS
Add your e-mail address to receive free newsletters from SCIRP.
Select Journal AA AAD AAR AASoci AAST ABB ABC ABCR ACES ACS ACT AD ADR AE AER AHS AID AiM AIT AJAC AJC AJCC AJCM AJIBM AJMB AJOR AJPS ALAMT ALC ALS AM AMI AMPC ANP APD APE APM ARS ARSci AS ASM BLR CC CE CellBio ChnStd CM CMB CN CRCM CS CSTA CUS CWEEE Detection EMAE ENG EPE ETSN FMAR FNS GEP GIS GM Graphene GSC Health IB ICA IIM IJAA IJAMSC IJCCE IJCM IJCNS IJG IJIDS IJIS IJMNTA IJMPCERO IJNM IJOC IJOHNS InfraMatics JACEN JAMP JASMI JBBS JBCPR JBiSE JBM JBNB JBPC JCC JCDSA JCPT JCT JDAIP JDM JEAS JECTC JEMAA JEP JFCMV JFRM JGIS JHEPGC JHRSS JIBTVA JILSA JIS JMF JMGBND JMMCE JMP JPEE JQIS JSBS JSEA JSEMAT JSIP JSS JSSM JST JTR JTST JTTs JWARP LCE MC ME MI MME MNSMS MPS MR MRC MRI MSA MSCE NJGC NM NR NS OALib OALibJ ODEM OJA OJAB OJAcct OJAnes OJAP OJApo OJAppS OJAPr OJAS OJBD OJBIPHY OJBM OJC OJCB OJCD OJCE OJCM OJD OJDer OJDM OJE OJEE OJEM OJEMD OJEpi OJER OJF OJFD OJG OJGas OJGen OJI OJIC OJIM OJINM OJL OJM OJMC OJMetal OJMH OJMI OJMIP OJML OJMM OJMN OJMP OJMS OJMSi OJN OJNeph OJO OJOG OJOGas OJOp OJOph OJOPM OJOTS OJPathology OJPC OJPChem OJPed OJPM OJPP OJPS OJPsych OJRA OJRad OJRD OJRM OJS OJSS OJSST OJST OJSTA OJTR OJTS OJU OJVM OPJ POS PP PST PSYCH SAR SCD SGRE SM SN SNL Soft SS TEL TI UOAJ VP WET WJA WJCD WJCMP WJCS WJET WJM WJNS WJNSE WJNST WJV WSN YM
More>>
S. N. Grigoriev, A. N. Krasnovskii and A. R. Khaziev, “Development of Scientific Principles of Technology for Continuous Manufacture of Difficult Reinforced Tubes from Polymeric Composite Materials,” Plastics, Vol. 12, 2011, pp. 56-58.
has been cited by the following article:
TITLE: Determination of the Optimal Speed of Pultrusion for Large-Sized Composite Rods
AUTHORS: Aleksandr Krasnovskii, Iliya Kazakov
KEYWORDS: Composite Material; Pultrusion; Stress-strain State; Permeability; Oversized Rod
JOURNAL NAME: Journal of Encapsulation and Adsorption Sciences, Vol.2 No.3, September 28, 2012
ABSTRACT: The paper describes a mathematical model of the stress-strain state of polymer composite materials in the pultrusion process of large-sized products. The influence of the pull speed on the stress-strain state of the products is investigated. To determine the maximum possible pull speed series of solutions at different pull speeds are obtained. Depending on the maximum strain in the cross section of the rod determined the optimal value of pulling speed.
Related Articles:
Stability and Leakage Analysis of a Novel PP Based 9T SRAM Cell Using N Curve at Deep Submicron Technology for Multimedia Applications
Shilpi Birla, Rakesh Kumar Singh, Manisha Pattanaik
DOI: 10.4236/cs.2011.24038 6,328 Downloads 10,317 Views Citations
Pub. Date: October 17, 2011
Development of the N-Doped Cu-Carbon Composite as a Novel Catalyst for the Removal Reactive Black 5
Nargish Jahan Ara, Mohammad Farhadur Rahman, Zubair Hasan, Md. Shofiqul Islam, Mohammad Mahbubur Rahman
DOI: 10.4236/ojapps.2020.107030 274 Downloads 419 Views Citations
Pub. Date: July 17, 2020
The Effect of γ-Radiations on Dielectric Properties of Composite Materials PE + x vol% TlGaSe2
E. M. Gojayev, A. G. Hasanova
DOI: 10.4236/ojinm.2015.54006 4,057 Downloads 4,773 Views Citations
Pub. Date: October 13, 2015
Advanced Welding Technology for Highly Stressable Multi-Material Designs with Fiber-Reinforced Plastics and Metals
Holger Seidlitz, Sebastian Fritzsche, Marcello Ambrosio, Alexander Kloshek
DOI: 10.4236/ojcm.2017.73010 997 Downloads 1,734 Views Citations
Pub. Date: July 21, 2017
Branches of solutions for an asymptotically linear elliptic problem on RN
Youyan Wan
DOI: 10.4236/ojapps.2012.24B043 3,229 Downloads 4,115 Views Citations
Pub. Date: January 16, 2013
