V. B. Chalivendra, A. Shukla, A. Bose and V. Parameswaran, “Processing and Mechanical Characterization of Lightweight Polyurethane Composites,” Journal of Ma-terial Science, Vol. 38, No. 8, 2003, pp. 1631-1643. doi:10.1023/A:1023203121299

has been cited by the following article:

• TITLE: Effect of Cenosphere Concentration on the Mechanical, Thermal, Rheological and Morphological Properties of Nylon 6

  AUTHORS: P. A. Wasekar, P. G. Kadam, S. T. Mhaske

  KEYWORDS: Nylon 6; Cenosphere; Crystallinity; Reinforcing Agent

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, August 20, 2012

  ABSTRACT: Cenospheres are widely used as filler in thermoset plastics and concrete mainly for density reduction of the material. But there is no work noted of using cenosphere as filler in thermoplastics. In this paper cenosphere concentration was varied from 0 to 10 phr of nylon 6 and the effect of the same on the mechanical, thermal, rheological and morphological properties of the composite were studied. Elongation was found to have increased by 83% and impact strength by 44% at 2.5 phr loading of cenosphere. Flexural strength increased upto 25% at 10 phr content of cenosphere.