B.A. Landry, J.D. Hummel, H.W. Nelson et al, “A review of available information on corrosion and deposition in coal and oil fired boilers and gas turbines”, ASME research committee, Pergamon press, The American society of mechanical engineers, New York, pp 1-197.

has been cited by the following article:

• TITLE: Hot Corrosion & Erosion Problems in Coal Based Power Plants in India and Possible Solutions – A Review

  AUTHORS: Vikas Chawla, Amita Chawla, D. Puri, S. Prakash, Prema G. Gurbuxani, Buta Singh Sidhu

  KEYWORDS: Hot corrosion, erosion, Thermal spraying (TS), Physical vapour deposition (PVD), Chemical vapour deposition (CVD), Nanostructured coatings.

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, March 28, 2011

  ABSTRACT: Hot corrosion and erosion are recognized as serious problems in coal based power generation plants in India. The coal used in Indian power stations has large amounts of ash (about 50%) which contain abrasive mineral species such as hard quartz (up to 15%) which increase the erosion propensity of coal. Hot corrosion and erosion in boilers and related components are responsible for huge losses, both direct and indirect, in power generation. An understanding of these problems and thus to develop suitable protective system is essential for maximizing the utilization of such components. These problems can be prevented by either changing the material or altering the environment or by separating the component surface from the environment. Corrosion prevention by the use of coatings for separating material from the environment is gaining importance in surface engineering.