D. Greve, I. J. Oppenheim, H. Sohn, C. P. Yue and W. Wu, “An Inductively Coupled Lamb Wave Transducer,” IEEE Sensors Journal, Vol. 7, No. 2, 2007, pp. 295-301. doi:10.1109/JSEN.2006.886904

has been cited by the following article:

• TITLE: Noncontact Driving System Using Induction-Based Method and Integrated Piezoelectric Ultrasonic Transducers

  AUTHORS: Riichi Murayama, Makiko Kobayashi, Kuo-Ting Wu, Cheng-Kuei Jen

  KEYWORDS: Ultrasonic Wave; Noncontact Sensing; Integrated Ultrasonic Transducer; Electromagnetic Induction Law

  JOURNAL NAME: Journal of Sensor Technology, Vol.2 No.2, June 13, 2012

  ABSTRACT: Integrated Ultrasonic Transducers (IUTs) have been developed for high-temperature nondestructive evaluation applications. In many field, it would be helpful if a pipe covered by a protective layer of about 10 cm thickness, which is under operation at several hundred Celsius, could be inspected from above the protective layer by an IUT. As a first step toward achieving the inspection of such a pipeline, an induction-based method using coils is presented together with IUTs. This study focuses on the effects of the separation distance (liftoff) between the coils on the ultrasonic signal strength and bandwidth of the IUTs. Ultrasonic signals were generated and received by the IUTs on a steel plate with a sufficient strength for thickness measurements when the liftoff was 20 cm. It was also shown that a ferrite disc together with the coils enhanced the received signal strength even when the liftoff was over 10 cm.